FCC ID NKR-MB43

Wireless module

by Wistron NeWeb Corporation

Grantee Code: NKR   Product Code: MB43
Latest application date: 2024-01-03

FCC ID Device Details

FCC IDNKR-MB43
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNKR
Product CodeMB43
Applicant BusinessWistron NeWeb Corporation 🇹🇼
Related Domains wnc.com.tw icertifi.com.tw
Equipment ClassWireless module
Test FirmInternational Certification Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2024-01-03
2402-2480 MHzOriginal Equipment2022-12-07

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2023-06-04PDF 358 KB
Internal PhotosInternal Photos2024-01-03PDF 462.5 KB
Internal PhotosInternal Photos2023-06-04PDF 351.6 KB
External PhotosExternal Photos2024-01-03PDF 638.4 KB
External PhotosExternal Photos2023-06-04PDF 616.7 KB
ID Label/Location InfoID Label/Location Info2022-12-07PDF 1.2 MB
Test Setup PhotosTest Setup Photos2024-01-03PDF 356 KB
Test Setup PhotosTest Setup Photos2023-06-04PDF 669.4 KB
Antenna reportTest Report2024-01-03PDF 1 MB
Test Report_BLETest Report2024-01-03PDF 1.1 MB
Test Report_WLANTest Report2024-01-03PDF 1.1 MB
Antenna Specification Metadata onlyTest Report2022-12-07PDF 1.1 MB
Antenna Specification RevisedTest Report2022-12-07PDF 1 MB
Test Report_BLETest Report2022-12-07PDF 1,016 KB
Test Report_WLANTest Report2022-12-07PDF 1.7 MB
Attestation StatementsAttestation Statements2024-01-03PDF 224.9 KB
U.S. Agent LetterAttestation Statements2024-01-03PDF 321.3 KB
Authorization LetterCover Letter(s)2024-01-03PDF 153.1 KB
C2PC cover letterCover Letter(s)2024-01-03PDF 273.6 KB
ConfidentialityCover Letter(s)2024-01-03PDF 285.7 KB
POACover Letter(s)2024-01-03PDF 267.1 KB
Ad hocCover Letter(s)2022-12-07PDF 207.7 KB
Authorization(contact person)Cover Letter(s)2022-12-07PDF 421.2 KB
Modular Approval RequestCover Letter(s)2022-12-07PDF 264 KB
POACover Letter(s)2022-12-07PDF 50.9 KB
confidentialityCover Letter(s)2022-12-07PDF 191.2 KB
RF Exposure Info.RF Exposure Info2024-01-03PDF 184.5 KB
MPERF Exposure Info2022-12-07PDF 432.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 93.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 112.6 KB
Schematics Metadata onlySchematicsPDF 683.8 KB
Schematics Metadata onlySchematicsPDF 682.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 210 KB

Application Information

Application IDWvXEtdMGDQjx6suTGS9rmg==
Final Action Date2024-01-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0006053789
ModelMB43
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless module
Responsible PartyWilliam Su, Senior Director / System Engineering dept., william.su@wnc.com.tw , 886-3-666-7799
AgentGary Gary Gary, International Certification Corp., GaryChang@icertifi.com.tw , +88632718628
Technical ContactGary Chang, International Certification Corp., GaryChang@icertifi.com.tw , +88632718628
Non-Technical ContactWendy Liao, International Certification Corp., wendyLiao@icertifi.com.tw , +88632718629
Test FirmFu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw , 886-3-271-8666
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change. This change is : (a). Add a Schottky diode to protect LDO Voltage regulator. (b). Add a level shifter on UART6_RX (c). Add a 5V net to the connector (d). PCB layout is modified for above change Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode.

Applications

Application IDDatePurpose
WvXEtdMGDQjx6suTGS9rmg==2024-01-03Class II permissive change or modification of presently authorized equipment
94u12J4vkxjJiEVAbYWtSQ==2022-12-07Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.00715C
2412-2462 MHz0.33415C

Grants

TCB Grant - Application WvXEtdMGDQjx6suTGS9rmg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/03/2024

Application Dated: 12/29/2023
Wistron NeWeb Corporation
20 Park Avenue II
Hsinchu Science Park
Hsinchu, 308
Taiwan
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKR-MB43
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: Digital Transmission System
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.007  
15C 2412.0  -  2462.0 0.334  

Class II Permissive Change. This change is : (a). Add a Schottky diode to protect LDO Voltage regulator. (b). Add a level shifter on UART6_RX (c). Add a 5V net to the connector (d). PCB layout is modified for above change

Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode.


EAS Grant - Application WvXEtdMGDQjx6suTGS9rmg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wistron NeWeb Corporation
20 Park Avenue II Hsinchu Science Park
Hsinchu, 308
Taiwan
  Date of Grant: 01/03/2024

Application Dated: 12/29/2023
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKR-MB43
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: Digital Transmission System
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.007  
15C 2412.0  -  2462.0 0.334  

Class II Permissive Change. This change is : (a). Add a Schottky diode to protect LDO Voltage regulator. (b). Add a level shifter on UART6_RX (c). Add a 5V net to the connector (d). PCB layout is modified for above change

Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode.



TCB Grant - Application 94u12J4vkxjJiEVAbYWtSQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 12/07/2022

Application Dated: 12/05/2022
Wistron NeWeb Corporation
20 Park Avenue II
Hsinchu Science Park
Hsinchu, 308
Taiwan
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKR-MB43
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: Digital Transmission System
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.007  
15C 2412.0  -  2462.0 0.334  

Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode.

EAS Grant - Application 94u12J4vkxjJiEVAbYWtSQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wistron NeWeb Corporation
20 Park Avenue II Hsinchu Science Park
Hsinchu, 308
Taiwan
  Date of Grant: 12/07/2022

Application Dated: 12/05/2022
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKR-MB43
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: Digital Transmission System
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.007  
15C 2412.0  -  2462.0 0.334  

Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode.



Mail To: