FCC ID NKRM18Q2

LGA Module

by Wistron NeWeb Corporation

Grantee Code: NKR   Product Code: M18Q2
Latest application date: 2018-06-08

Device Images

FCC ID Device Details

FCC IDNKRM18Q2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNKR
Product CodeM18Q2
Applicant BusinessWistron NeWeb Corporation 🇹🇼
Related Domains wnc.com.tw
Equipment ClassLGA Module
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2018-06-08
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2016-10-24
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2016-10-20
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2016-07-08
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2016-07-08
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2016-07-08
699.7-715.3 MHzOriginal Equipment2016-05-23

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2017-01-04PDF 1.2 MB
Users ManualUsers Manual2017-01-04PDF 1.2 MB
Users ManualUsers Manual2017-01-04PDF 1.2 MB
User ManualUsers Manual2016-11-16PDF 1.2 MB
User Manual m14q2fUsers Manual2016-10-24PDF 1.2 MB
User Manual m14q2fgUsers Manual2016-10-24PDF 1.2 MB
User Manuel M14Q2Users Manual2016-10-20PDF 1.2 MB
User Manuel M14Q2GUsers Manual2016-10-20PDF 1.2 MB
Internal PhotosInternal Photos2018-06-08PDF 201 KB
Internal PhotosInternal Photos2016-11-16PDF 289.9 KB
External PhotosExternal Photos2018-06-08PDF 441.2 KB
External PhotoExternal Photos2016-11-16PDF 4.1 MB
Label Sample M14Q2ID Label/Location Info2016-07-08PDF 140.3 KB
Label Sample M14Q2FID Label/Location Info2016-07-08PDF 139.9 KB
Label Sample M14Q2FGID Label/Location Info2016-07-08PDF 153.6 KB
Label Sample M14Q2GID Label/Location Info2016-07-08PDF 147.3 KB
Label Sample M18Q2ID Label/Location Info2016-07-08PDF 132.3 KB
Label Sample M18Q2GID Label/Location Info2016-07-08PDF 139.4 KB
Label LocationID Label/Location Info2016-05-23PDF 33.3 KB
Label SampleID Label/Location Info2016-05-23PDF 92.2 KB
Op Desc Technical Hardware Change Notes 1Operational Description2018-06-08PDF 394.6 KB
Op Desc Technical Hardware Change Notes 2Operational Description2018-06-08PDF 395 KB
Test Setup PhotosTest Setup Photos2018-06-08PDF 614.3 KB
Test Setup Photos PCB LTETest Setup Photos2016-11-16PDF 514 KB
Test Setup Photos PCB WCDMATest Setup Photos2016-11-16PDF 527.5 KB
Test Report PCB Part 22Test Report2018-06-08PDF 5 MB
Test Report PCB Part 24Test Report2018-06-08PDF 3.8 MB
Test Report PCB Part 27Test Report2018-06-08PDF 4.5 MB
Test ReportTest Report2016-10-24PDF 455.5 KB
Test ReportTest Report2016-10-20PDF 356.6 KB
Test ReportTest Report2016-07-08PDF 435 KB
Test Report PCBTest Report2016-07-08PDF 438.1 KB
Test Report PCB LTETest Report2016-07-08PDF 455.5 KB
Test Report PCB WCDMATest Report2016-07-08PDF 270.6 KB
Test Report PCB WCDMATest Report2016-05-23PDF 2.5 MB
Test Report PCE Part 1Test Report2016-05-23PDF 4.9 MB
Test Report PCE Part 2Test Report2016-05-23PDF 4.9 MB
Test Report PCE Part 3Test Report2016-05-23PDF 4.9 MB
Test Report PCE Part 4Test Report2016-05-23PDF 5 MB
Test Report PCE Part 5Test Report2016-05-23PDF 3.8 MB
Attestation Declaration of ConformityAttestation Statements2018-06-08PDF 23.2 KB
Agent AuthorizationCover Letter(s)2018-06-08PDF 31.7 KB
Contact AuthorizationCover Letter(s)2018-06-08PDF 76.5 KB
Description of ChangeCover Letter(s)2018-06-08PDF 24.5 KB
Class II Permissive Change LetterCover Letter(s)2016-10-24PDF 231.4 KB
POACover Letter(s)2016-10-24PDF 191.3 KB
Class II Permissive Change LetterCover Letter(s)2016-10-20PDF 163.4 KB
POACover Letter(s)2016-10-20PDF 191.3 KB
Class II Permissive Change Cover LetterCover Letter(s)2016-07-08PDF 62.9 KB
Class II Permissive Change LetterCover Letter(s)2016-07-08PDF 63.9 KB
Class II Permissive Change LetterCover Letter(s)2016-07-08PDF 61.2 KB
Confidentiality LetterCover Letter(s)2016-07-08PDF 34.1 KB
Confidentiality Request LetterCover Letter(s)2016-07-08PDF 34.1 KB
Confidentiality Request LetterCover Letter(s)2016-07-08PDF 34.5 KB
POACover Letter(s)2016-07-08PDF 31.8 KB
Confidentiality Letter Long TermCover Letter(s)2016-05-23PDF 37.7 KB
Confidentiality Letter Short TermCover Letter(s)2016-05-23PDF 41.6 KB
Modular Approval LetterCover Letter(s)2016-05-23PDF 147.3 KB
POACover Letter(s)2016-05-23PDF 8.7 KB
MPE ReportRF Exposure Info2018-06-08PDF 235.8 KB
RF ExposureRF Exposure Info2016-05-23PDF 511.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 120.3 KB
Schematics Metadata onlySchematicsPDF 129.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 240.5 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 44.1 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 26.7 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 26.7 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 26.7 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 115.7 KB

Application Information

Application IDVon3lZWErnsLjM9dEJvNqQ==
Final Action Date2018-06-08
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0006053789
ModelM18Q2
Frequency Range699.7-715.3 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionLGA Module
Responsible PartyWilliam Su, Senior Director / System Engineering dept., william.su@wnc.com.tw , 886-3-666-7799
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-(0)3-260-0884
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 0.6 dBi for satisfying RF exposure compliance according to as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Bands 5 and 12.

Applications

Application IDDatePurpose
Von3lZWErnsLjM9dEJvNqQ==2018-06-08Class II permissive change or modification of presently authorized equipment
zODa/fucxi4iGUMHsgVj9g==2016-10-24Class II permissive change or modification of presently authorized equipment
il41Tp9+VUhJiSPOehykDA==2016-10-20Class II permissive change or modification of presently authorized equipment
dVU/OjAn7OKivMt+FtmGDQ==2016-07-08Class II permissive change or modification of presently authorized equipment
Kv9kgwi/6Y5SSPdRr3GyIw==2016-07-08Class II permissive change or modification of presently authorized equipment
FUEwOTNWFI5AWBDwilzXxw==2016-07-08Class II permissive change or modification of presently authorized equipment
iJQRTh0KvwVRtOM4dRgFwA==2016-05-23Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
699.7-715.3 MHz0.8810.0088ppm1M10W7D27
704-711 MHz1.08390.0088ppm9M11G7D27
704-711 MHz0.80170.0088ppm9M07W7D27
825.5-847.5 MHz0.8670.0063ppm2M73W7D22H
829-844 MHz0.78340.0063ppm9M07W7D22H
829-844 MHz1.06660.0063ppm8M99G7D22H
1710.7-1754.3 MHz0.70630.0029ppm1M09W7D27
1720-1745 MHz0.94840.0029ppm18M3G7D27
1720-1745 MHz0.70150.0029ppm18M3G7D27
1720-1745 MHz0.70150.0029ppm18M3W7D27
1850.7-1909.3 MHz1.14820.0025ppm1M09W7D24E
1852.4-1907.6 MHz1.83230.0096ppm4M13F9W24E
1860-1900 MHz1.43550.0025ppm18M5G7D24E
1860-1900 MHz10.0025ppm18M3W7D24E

Grants

TCB Grant - Application zODa/fucxi4iGUMHsgVj9g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/24/2016

Application Dated: 10/20/2016
Wistron NeWeb Corporation
20 Park Avenue II
Hsinchu Science Park
Hsinchu, 308
Taiwan
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 1.3459 0.0215  PM 4M13F9W
24E 1852.4  -  1907.6 1.8323 0.0096  PM 4M13F9W
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
22H 829.0  -  844.0 1.0666 0.0063  PM 8M99G7D
22H 829.0  -  844.0 0.7834 0.0063  PM 9M07W7D
22H 825.5  -  847.5 0.867 0.0063  PM 2M73W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, and 27. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Bands 5 and 12. This class II permissive change adds two new model numbers M14Q2F and M14Q2FG to identify new software configurations.

EAS Grant - Application zODa/fucxi4iGUMHsgVj9g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wistron NeWeb Corporation
20 Park Avenue II Hsinchu Science Park
Hsinchu, 308
Taiwan
  Date of Grant: 10/24/2016

Application Dated: 10/20/2016
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 1.3459 0.0215  PM 4M13F9W
24E 1852.4  -  1907.6 1.8323 0.0096  PM 4M13F9W
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
22H 829.0  -  844.0 1.0666 0.0063  PM 8M99G7D
22H 829.0  -  844.0 0.7834 0.0063  PM 9M07W7D
22H 825.5  -  847.5 0.867 0.0063  PM 2M73W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, and 27. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Bands 5 and 12. This class II permissive change adds two new model numbers M14Q2F and M14Q2FG to identify new software configurations.



TCB Grant - Application Von3lZWErnsLjM9dEJvNqQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 06/08/2018

Application Dated: 06/06/2018
Wistron NeWeb Corporation
20 Park Avenue II
Hsinchu Science Park
Hsinchu, 308
Taiwan
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 1.3459 0.0215  PM 4M13F9W
24E 1852.4  -  1907.6 1.8323 0.0096  PM 4M13F9W
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
22H 829.0  -  844.0 1.0666 0.0063  PM 8M99G7D
22H 829.0  -  844.0 0.7834 0.0063  PM 9M07W7D
22H 825.5  -  847.5 0.867 0.0063  PM 2M73W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 0.6 dBi for satisfying RF exposure compliance according to as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Bands 5 and 12.

EAS Grant - Application Von3lZWErnsLjM9dEJvNqQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wistron NeWeb Corporation
20 Park Avenue II Hsinchu Science Park
Hsinchu, 308
Taiwan
  Date of Grant: 06/08/2018

Application Dated: 06/06/2018
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 1.3459 0.0215  PM 4M13F9W
24E 1852.4  -  1907.6 1.8323 0.0096  PM 4M13F9W
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
22H 829.0  -  844.0 1.0666 0.0063  PM 8M99G7D
22H 829.0  -  844.0 0.7834 0.0063  PM 9M07W7D
22H 825.5  -  847.5 0.867 0.0063  PM 2M73W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 0.6 dBi for satisfying RF exposure compliance according to as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Bands 5 and 12.



TCB Grant - Application Kv9kgwi/6Y5SSPdRr3GyIw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/08/2016

Application Dated: 07/08/2016
Wistron NeWeb Corporation
20 Park Avenue II
Hsinchu Science Park
Hsinchu, 308
Taiwan
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 1.3459 0.0215  PM 4M13F9W
24E 1852.4  -  1907.6 1.8323 0.0096  PM 4M13F9W
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D
22H 829.0  -  844.0 1.0666 0.0063  PM 8M99G7D
22H 829.0  -  844.0 0.7834 0.0063  PM 9M07W7D
22H 825.5  -  847.5 0.867 0.0063  PM 2M73W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi for satisfying RF exposure compliance according to as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Bands 5 and 12.

This class II permissive change adds two new model numbers M14Q2F and M14Q2FG to identify new software configurations.


EAS Grant - Application Kv9kgwi/6Y5SSPdRr3GyIw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wistron NeWeb Corporation
20 Park Avenue II Hsinchu Science Park
Hsinchu, 308
Taiwan
  Date of Grant: 07/08/2016

Application Dated: 07/08/2016
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 1.3459 0.0215  PM 4M13F9W
24E 1852.4  -  1907.6 1.8323 0.0096  PM 4M13F9W
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D
22H 829.0  -  844.0 1.0666 0.0063  PM 8M99G7D
22H 829.0  -  844.0 0.7834 0.0063  PM 9M07W7D
22H 825.5  -  847.5 0.867 0.0063  PM 2M73W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi for satisfying RF exposure compliance according to as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Bands 5 and 12.

This class II permissive change adds two new model numbers M14Q2F and M14Q2FG to identify new software configurations.



TCB Grant - Application il41Tp9+VUhJiSPOehykDA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/20/2016

Application Dated: 10/19/2016
Wistron NeWeb Corporation
20 Park Avenue II
Hsinchu Science Park
Hsinchu, 308
Taiwan
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 24 and 27. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Band 12. This class II permissive change adds two new model numbers M14Q2 and M14Q2G to identify new software configurations.

EAS Grant - Application il41Tp9+VUhJiSPOehykDA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wistron NeWeb Corporation
20 Park Avenue II Hsinchu Science Park
Hsinchu, 308
Taiwan
  Date of Grant: 10/20/2016

Application Dated: 10/19/2016
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 24 and 27. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Band 12. This class II permissive change adds two new model numbers M14Q2 and M14Q2G to identify new software configurations.



TCB Grant - Application iJQRTh0KvwVRtOM4dRgFwA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/23/2016

Application Dated: 05/20/2016
Wistron NeWeb Corporation
20 Park Avenue II
Hsinchu Science Park
Hsinchu, 308
Taiwan
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 1.3459 0.0215  PM 4M13F9W
24E 1852.4  -  1907.6 1.8323 0.0096  PM 4M13F9W
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D
22H 829.0  -  844.0 1.0666 0.0063  PM 8M99G7D
22H 829.0  -  844.0 0.7834 0.0063  PM 9M07W7D
22H 825.5  -  847.5 0.867 0.0063  PM 2M73W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi for satisfying RF exposure compliance according to as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Bands 5 and 12.

EAS Grant - Application iJQRTh0KvwVRtOM4dRgFwA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wistron NeWeb Corporation
20 Park Avenue II Hsinchu Science Park
Hsinchu, 308
Taiwan
  Date of Grant: 05/23/2016

Application Dated: 05/20/2016
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 1.3459 0.0215  PM 4M13F9W
24E 1852.4  -  1907.6 1.8323 0.0096  PM 4M13F9W
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D
22H 829.0  -  844.0 1.0666 0.0063  PM 8M99G7D
22H 829.0  -  844.0 0.7834 0.0063  PM 9M07W7D
22H 825.5  -  847.5 0.867 0.0063  PM 2M73W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi for satisfying RF exposure compliance according to as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Bands 5 and 12.



TCB Grant - Application FUEwOTNWFI5AWBDwilzXxw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/08/2016

Application Dated: 07/08/2016
Wistron NeWeb Corporation
20 Park Avenue II
Hsinchu Science Park
Hsinchu, 308
Taiwan
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi for satisfying RF exposure compliance according to as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 24 and 27. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Band 12.

This class II permissive change adds two new model numbers M14Q2 and M14Q2G to identify new software configurations.


EAS Grant - Application FUEwOTNWFI5AWBDwilzXxw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wistron NeWeb Corporation
20 Park Avenue II Hsinchu Science Park
Hsinchu, 308
Taiwan
  Date of Grant: 07/08/2016

Application Dated: 07/08/2016
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3W7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi for satisfying RF exposure compliance according to as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 24 and 27. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Band 12.

This class II permissive change adds two new model numbers M14Q2 and M14Q2G to identify new software configurations.



TCB Grant - Application dVU/OjAn7OKivMt+FtmGDQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/08/2016

Application Dated: 07/07/2016
Wistron NeWeb Corporation
20 Park Avenue II
Hsinchu Science Park
Hsinchu, 308
Taiwan
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3G7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi for satisfying RF exposure compliance according to as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 24 and 27. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Band 12.

This class II permissive change adds two new model numbers M18Q2 and M18Q2G to identify new software configurations.


EAS Grant - Application dVU/OjAn7OKivMt+FtmGDQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wistron NeWeb Corporation
20 Park Avenue II Hsinchu Science Park
Hsinchu, 308
Taiwan
  Date of Grant: 07/08/2016

Application Dated: 07/07/2016
 
Attention: William Su , Senior Director / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRM18Q2
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LGA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 1.4355 0.0025  PM 18M5G7D
24E 1860.0  -  1900.0 1.0 0.0025  PM 18M3W7D
24E 1850.7  -  1909.3 1.1482 0.0025  PM 1M09W7D
27 1720.0  -  1745.0 0.9484 0.0029  PM 18M3G7D
27 1720.0  -  1745.0 0.7015 0.0029  PM 18M3G7D
27 1710.7  -  1754.3 0.7063 0.0029  PM 1M09W7D
27 704.0  -  711.0 1.0839 0.0088  PM 9M11G7D
27 704.0  -  711.0 0.8017 0.0088  PM 9M07W7D
27 699.7  -  715.3 0.881 0.0088  PM 1M10W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi for satisfying RF exposure compliance according to as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 24 and 27. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Band 12.

This class II permissive change adds two new model numbers M18Q2 and M18Q2G to identify new software configurations.



Mail To: