FCC ID NKRUWMWBT-CWM01

MOD-SM WNC BLUETOOTH/WLAN CWM-01

by Wistron NeWeb Corporation

Grantee Code: NKR   Product Code: UWMWBTCWM01
Latest application date: 2011-12-28

FCC ID Device Details

FCC IDNKRUWMWBT-CWM01
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNKR
Product CodeUWMWBTCWM01
Applicant BusinessWistron NeWeb Corporation 🇹🇼
Related Domains wnc.com.tw
Equipment ClassMOD-SM WNC BLUETOOTH/WLAN CWM-01
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2011-12-28
2412-2462 MHzOriginal Equipment2011-12-28

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2011-12-28PDF 1.1 MB
Internal PhotosInternal Photos2011-12-28PDF 529.6 KB
External PhotosExternal Photos2011-12-28PDF 442.3 KB
FCC ID Label & LocationID Label/Location Info2011-12-28PDF 100.8 KB
FCC ID Label and LocationID Label/Location Info2011-12-28PDF 100.8 KB
Test Setup PhotosTest Setup Photos2011-12-28PDF 465.9 KB
Co-location ReportTest Report2011-12-28PDF 110.6 KB
test report for DSSTest Report2011-12-28PDF 1.1 MB
test report for DTSTest Report2011-12-28PDF 1.1 MB
Declaration of ConformityAttestation Statements2011-12-28PDF 269.6 KB
DoC letterAttestation Statements2011-12-28PDF 269.6 KB
Module Approval Request LetterAttestation Statements2011-12-28PDF 27.2 KB
LTC request letterCover Letter(s)2011-12-28PDF 3.4 MB
POACover Letter(s)2011-12-28PDF 273.2 KB
MPE ReportRF Exposure Info2011-12-28PDF 101.5 KB

Application Information

Application IDxgfklrbk2vQR9qvUfjtYwg==
Final Action Date2011-12-28
Application PurposeOriginal Equipment
Applicant FRN0006053789
ModelUWMWBT-CWM01
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionMOD-SM WNC BLUETOOTH/WLAN CWM-01
Responsible PartyEdward Yeh, Senior Engineer / System Engineering dept., edward.yeh@wnc.com.tw , 886-3-666-7799
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
xgfklrbk2vQR9qvUfjtYwg==2011-12-28Original Equipment
WR46uw/opbjw+nwZDj7+pA==2011-12-28Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.004300015CCC
2412-2462 MHz0.226500015CCC

Grants

TCB Grant - Application xgfklrbk2vQR9qvUfjtYwg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 12/28/2011

Application Dated: 12/28/2011
Wistron NeWeb Corporation
20 Park Avenue II
Hsinchu Science Park
Hsinchu, 308
Taiwan
 
Attention: Edward Yeh , Senior Engineer / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRUWMWBT-CWM01
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: MOD-SM WNC BLUETOOTH/WLAN CWM-01
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0043  

Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xgfklrbk2vQR9qvUfjtYwg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wistron NeWeb Corporation
20 Park Avenue II Hsinchu Science Park
Hsinchu, 308
Taiwan
  Date of Grant: 12/28/2011

Application Dated: 12/28/2011
 
Attention: Edward Yeh , Senior Engineer / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRUWMWBT-CWM01
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: MOD-SM WNC BLUETOOTH/WLAN CWM-01
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0043  

Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application WR46uw/opbjw+nwZDj7+pA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 12/28/2011

Application Dated: 12/28/2011
Wistron NeWeb Corporation
20 Park Avenue II
Hsinchu Science Park
Hsinchu, 308
Taiwan
 
Attention: Edward Yeh , Senior Engineer / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRUWMWBT-CWM01
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: Digital Transmission System
Notes: MOD-SM WNC BLUETOOTH/WLAN CWM-01
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.2265  

Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application WR46uw/opbjw+nwZDj7+pA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wistron NeWeb Corporation
20 Park Avenue II Hsinchu Science Park
Hsinchu, 308
Taiwan
  Date of Grant: 12/28/2011

Application Dated: 12/28/2011
 
Attention: Edward Yeh , Senior Engineer / System Engineering dept.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKRUWMWBT-CWM01
Name of Grantee:  Wistron NeWeb Corporation
Equipment Class: Digital Transmission System
Notes: MOD-SM WNC BLUETOOTH/WLAN CWM-01
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.2265  

Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: