FCC ID NKS-DV423-LTE

GSM, WCDMA, LTE Module

by PeopleNet Communications Corporation

Grantee Code: NKS   Product Code: DV423LTE
Latest application date: 2018-05-22

FCC ID Device Details

FCC IDNKS-DV423-LTE
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNKS
Product CodeDV423LTE
Applicant BusinessPeopleNet Communications Corporation 🇺🇸
Related Domains trimble.com ul.com
Equipment ClassGSM, WCDMA, LTE Module
Test FirmUL Verification Services Inc. (formerly UL CCS)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
706.5-713.5 MHzClass II permissive change or modification of presently authorized equipment2018-05-22
706.5-713.5 MHzChange in identification of presently authorized equipment. Original FCC ID: QIPPLS8-USR3 Grant Date: 10/26/20152018-05-10

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2018-06-01PDF 4 MB
External Photos_Part1External Photos2018-06-01PDF 3.8 MB
External Photos_Part2External Photos2018-06-01PDF 3 MB
External PhotosExternal Photos2018-05-10PDF 197.3 KB
LabelID Label/Location Info2018-05-10PDF 794.8 KB
12216550-E3V3_FCC_ WWAN Report Final_Test Setup PhotosTest Setup Photos2018-06-01PDF 203.6 KB
12216550-E3V3_FCC_ WWAN Report Final_Test ReportTest Report2018-05-22PDF 265.3 KB
PeopleNet FCC II change letter DV423Cover Letter(s)2018-05-22PDF 34 KB
Peoplenet FCC agent auth letterCover Letter(s)2018-05-22PDF 80.7 KB
Peoplenet Request for confidentiality letter - LTECover Letter(s)2018-05-22PDF 66.5 KB
Agent Authorization LetterCover Letter(s)2018-05-10PDF 80.7 KB
ID Change Authorization LetterCover Letter(s)2018-05-10PDF 40.6 KB
ID Change Request LetterCover Letter(s)2018-05-10PDF 19 KB
12216550-E4V3_FCC RF Exposure Report FinalRF Exposure Info2018-05-22PDF 264.2 KB
MA245.LBIC.002_DraftDatasheet_3Mcable Metadata onlyParts List/Tune Up InfoPDF 4.8 MB

Application Information

Application IDgIDXJbX6e2DE/kcuT6t9yg==
Final Action Date2018-05-22
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0023060049
ModelDV423-LTE
Frequency Range706.5-713.5 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionGSM, WCDMA, LTE Module
Responsible PartyAlan Johnson, Director, Hardware Engineering, alan_johnson@trimble.com , 612-816-2128
AgentGrace Grace Grace, UL Verification Services, Inc., grace.rincand@ul.com , 5107711000
Technical ContactGrace Rincand, UL Verification Services Inc., grace.rincand@ul.com , 5107711000
Non-Technical ContactGrace Rincand, UL Verification Services Inc., grace.rincand@ul.com , 5107711000
Test FirmJay Kogoma, UL Verification Services Inc. (formerly UL CCS), jay.kogoma@ul.com , 510-319-4135
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date06/01/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC to lower power in the GSM 1900 band. Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. For mobile and fixed operating configurations the antenna gain, including cable loss must not exceed values as documented in this filing for satisfying RF exposure compliance. Cable length shall be 3 meters for the supplied antenna. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E and 27. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use.

Applications

Application IDDatePurpose
gIDXJbX6e2DE/kcuT6t9yg==2018-05-22Class II permissive change or modification of presently authorized equipment
Xpp81WyVxvONH4VHFV7KxQ==2018-05-10Change in identification of presently authorized equipment. Original FCC ID: QIPPLS8-USR3 Grant Date: 10/26/2015
18LYGkxmcncvycCfuH2BBw==2018-05-10Change in identification of presently authorized equipment. Original FCC ID: QIPPLS8-USR3 Grant Date: 10/26/2015

Equipment Authorization

FrequencyOutputToleranceEmissionRules
706.5-713.5 MHz0.1580.01ppm4M51G7D27
706.5-713.5 MHz0.120.01ppm4M59W7D27
709-711 MHz0.1440.01ppm9M06G7D27
709-711 MHz0.1120.01ppm9M06W7D27
709-711 MHz0.1120.01ppm9MO6W7D27
824.7-848.3 MHz0.1780.01ppm1M09G7D22H
824.7-848.3 MHz0.1410.01ppm1M10W7D22H
826.4-846.6 MHz0.2440.02ppm4M17F9W22H
829-844 MHz0.1660.01ppm9M06G7D22H
829-844 MHz0.1320.01ppm9M06W7D22H
1712.4-1752.6 MHz0.2620.02ppm4M16F9W27
1712.5-1752.5 MHz0.1590.01ppm4M50W7D27
1715-1750 MHz0.20.01ppm9M06G7D27
1720-1745 MHz0.1780.01ppm19M9G7D27
1720-1745.5 MHz0.1780.01ppm19M9G7D27
1720-1745 MHz0.1350.01ppm17M9W7D27
1720-1745.5 MHz0.1350.01ppm17M9W7D27
1850.2-1909.8 MHz10.02ppm247KGXW24E
1850.2-1909.8 MHz0.830.02ppm247KG7W24E
1852.4-1907.6 MHz0.2640.02ppm4M17F9W24E
1852.5-1907.5 MHz0.1820.01ppm4M53G7D24E
1852.5-1907.5 MHz0.1410.01ppm4M51W7D24E
1860-1900 MHz0.1560.01ppm17M9G7D24E
1860-1900 MHz0.1290.01ppm17M9W7D24E

Grants

TCB Grant - Application Xpp81WyVxvONH4VHFV7KxQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/10/2018

Application Dated: 05/10/2018
PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-DV423-LTE
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: GSM, WCDMA, LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application Xpp81WyVxvONH4VHFV7KxQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
United States
  Date of Grant: 05/10/2018

Application Dated: 05/10/2018
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-DV423-LTE
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: GSM, WCDMA, LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



TCB Grant - Application gIDXJbX6e2DE/kcuT6t9yg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/22/2018

Application Dated: 05/22/2018
PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-DV423-LTE
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: PCS Licensed Transmitter
Notes: GSM, WCDMA, LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.84 0.02  PM 245KGXW
22H 824.2  -  848.8 0.9 0.02  PM 245KGXW
22H 826.4  -  846.6 0.244 0.02  PM 4M17F9W
22H 824.7  -  848.3 0.178 0.01  PM 1M09G7D
22H 824.7  -  848.3 0.141 0.01  PM 1M10W7D
22H 829.0  -  844.0 0.166 0.01  PM 9M06G7D
22H 829.0  -  844.0 0.132 0.01  PM 9M06W7D
27 706.5  -  713.5 0.158 0.01  PM 4M51G7D
27 706.5  -  713.5 0.12 0.01  PM 4M59W7D
27 709.0  -  711.0 0.144 0.01  PM 9M06G7D
27 709.0  -  711.0 0.112 0.01  PM 9MO6W7D
27 1712.5  -  1752.5 0.159 0.01  PM 4M50W7D
27 1715.0  -  1750.0 0.2 0.01  PM 9M06G7D
27 1720.0  -  1745.5 0.178 0.01  PM 19M9G7D
27 1720.0  -  1745.5 0.135 0.01  PM 17M9W7D
27 1712.4  -  1752.6 0.262 0.02  PM 4M16F9W
24E 1850.2  -  1909.8 1.0 0.02  PM 247KGXW
24E 1850.2  -  1909.8 0.83 0.02  PM 247KG7W
24E 1852.4  -  1907.6 0.264 0.02  PM 4M17F9W
24E 1852.5  -  1907.5 0.182 0.01  PM 4M53G7D
24E 1852.5  -  1907.5 0.141 0.01  PM 4M51W7D
24E 1860.0  -  1900.0 0.156 0.01  PM 17M9G7D
24E 1860.0  -  1900.0 0.129 0.01  PM 17M9W7D

C2PC to lower power in the GSM 1900 band.

Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.

For mobile and fixed operating configurations the antenna gain, including cable loss must not exceed values as documented in this filing for satisfying RF exposure compliance. Cable length shall be 3 meters for the supplied antenna. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E and 27.

The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use.


EAS Grant - Application gIDXJbX6e2DE/kcuT6t9yg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
United States
  Date of Grant: 05/22/2018

Application Dated: 05/22/2018
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-DV423-LTE
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: PCS Licensed Transmitter
Notes: GSM, WCDMA, LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.84 0.02  PM 245KGXW
22H 824.2  -  848.8 0.9 0.02  PM 245KGXW
22H 826.4  -  846.6 0.244 0.02  PM 4M17F9W
22H 824.7  -  848.3 0.178 0.01  PM 1M09G7D
22H 824.7  -  848.3 0.141 0.01  PM 1M10W7D
22H 829.0  -  844.0 0.166 0.01  PM 9M06G7D
22H 829.0  -  844.0 0.132 0.01  PM 9M06W7D
27 706.5  -  713.5 0.158 0.01  PM 4M51G7D
27 706.5  -  713.5 0.12 0.01  PM 4M59W7D
27 709.0  -  711.0 0.144 0.01  PM 9M06G7D
27 709.0  -  711.0 0.112 0.01  PM 9MO6W7D
27 1712.5  -  1752.5 0.159 0.01  PM 4M50W7D
27 1715.0  -  1750.0 0.2 0.01  PM 9M06G7D
27 1720.0  -  1745.5 0.178 0.01  PM 19M9G7D
27 1720.0  -  1745.5 0.135 0.01  PM 17M9W7D
27 1712.4  -  1752.6 0.262 0.02  PM 4M16F9W
24E 1850.2  -  1909.8 1.0 0.02  PM 247KGXW
24E 1850.2  -  1909.8 0.83 0.02  PM 247KG7W
24E 1852.4  -  1907.6 0.264 0.02  PM 4M17F9W
24E 1852.5  -  1907.5 0.182 0.01  PM 4M53G7D
24E 1852.5  -  1907.5 0.141 0.01  PM 4M51W7D
24E 1860.0  -  1900.0 0.156 0.01  PM 17M9G7D
24E 1860.0  -  1900.0 0.129 0.01  PM 17M9W7D

C2PC to lower power in the GSM 1900 band.

Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.

For mobile and fixed operating configurations the antenna gain, including cable loss must not exceed values as documented in this filing for satisfying RF exposure compliance. Cable length shall be 3 meters for the supplied antenna. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E and 27.

The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use.



TCB Grant - Application 18LYGkxmcncvycCfuH2BBw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/10/2018

Application Dated: 05/10/2018
PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-DV423-LTE
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: PCS Licensed Transmitter
Notes: GSM, WCDMA, LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.84 0.02  PM 245KGXW
22H 824.2  -  848.8 0.9 0.02  PM 245KG7W
22H 826.4  -  846.6 0.244 0.02  PM 4M17F9W
22H 824.7  -  848.3 0.178 0.01  PM 1M09G7D
22H 824.7  -  848.3 0.141 0.01  PM 1M10W7D
22H 829.0  -  844.0 0.166 0.01  PM 9M06G7D
22H 829.0  -  844.0 0.132 0.01  PM 9M06W7D
27 706.5  -  713.5 0.158 0.01  PM 4M51G7D
27 706.5  -  713.5 0.12 0.01  PM 4M59W7D
27 709.0  -  711.0 0.144 0.01  PM 9M06G7D
27 709.0  -  711.0 0.112 0.01  PM 9M06W7D
27 1712.5  -  1752.5 0.159 0.01  PM 4M50W7D
27 1715.0  -  1750.0 0.2 0.01  PM 9M06G7D
27 1720.0  -  1745.0 0.178 0.01  PM 19M9G7D
27 1720.0  -  1745.0 0.135 0.01  PM 17M9W7D
27 1712.4  -  1752.6 0.262 0.02  PM 4M16F9W
24E 1850.2  -  1909.8 1.0 0.02  PM 247KGXW
24E 1850.2  -  1909.8 0.83 0.02  PM 247KG7W
24E 1852.4  -  1907.6 0.264 0.02  PM 4M17F9W
24E 1852.5  -  1907.5 0.182 0.01  PM 4M53G7D
24E 1852.5  -  1907.5 0.141 0.01  PM 4M51W7D
24E 1860.0  -  1900.0 0.156 0.01  PM 17M9G7D
24E 1860.0  -  1900.0 0.129 0.01  PM 17M9W7D

Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.

For mobile and fixed operating configurations the antenna gain, including cable loss must not exceed values as documented in this filing for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E and 27.

The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use.


EAS Grant - Application 18LYGkxmcncvycCfuH2BBw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
United States
  Date of Grant: 05/10/2018

Application Dated: 05/10/2018
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-DV423-LTE
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: PCS Licensed Transmitter
Notes: GSM, WCDMA, LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.84 0.02  PM 245KGXW
22H 824.2  -  848.8 0.9 0.02  PM 245KG7W
22H 826.4  -  846.6 0.244 0.02  PM 4M17F9W
22H 824.7  -  848.3 0.178 0.01  PM 1M09G7D
22H 824.7  -  848.3 0.141 0.01  PM 1M10W7D
22H 829.0  -  844.0 0.166 0.01  PM 9M06G7D
22H 829.0  -  844.0 0.132 0.01  PM 9M06W7D
27 706.5  -  713.5 0.158 0.01  PM 4M51G7D
27 706.5  -  713.5 0.12 0.01  PM 4M59W7D
27 709.0  -  711.0 0.144 0.01  PM 9M06G7D
27 709.0  -  711.0 0.112 0.01  PM 9M06W7D
27 1712.5  -  1752.5 0.159 0.01  PM 4M50W7D
27 1715.0  -  1750.0 0.2 0.01  PM 9M06G7D
27 1720.0  -  1745.0 0.178 0.01  PM 19M9G7D
27 1720.0  -  1745.0 0.135 0.01  PM 17M9W7D
27 1712.4  -  1752.6 0.262 0.02  PM 4M16F9W
24E 1850.2  -  1909.8 1.0 0.02  PM 247KGXW
24E 1850.2  -  1909.8 0.83 0.02  PM 247KG7W
24E 1852.4  -  1907.6 0.264 0.02  PM 4M17F9W
24E 1852.5  -  1907.5 0.182 0.01  PM 4M53G7D
24E 1852.5  -  1907.5 0.141 0.01  PM 4M51W7D
24E 1860.0  -  1900.0 0.156 0.01  PM 17M9G7D
24E 1860.0  -  1900.0 0.129 0.01  PM 17M9W7D

Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.

For mobile and fixed operating configurations the antenna gain, including cable loss must not exceed values as documented in this filing for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E and 27.

The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use.



Mail To: