FCC ID NKS-PD5-WIFI

WLAN/Bluetooth/NFC host-based multiradio module

by PeopleNet Communications Corporation

Grantee Code: NKS   Product Code: PD5WIFI
Latest application date: 2018-05-24

FCC ID Device Details

FCC IDNKS-PD5-WIFI
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNKS
Product CodePD5WIFI
Applicant BusinessPeopleNet Communications Corporation 🇺🇸
Related Domains trimble.com
Equipment ClassWLAN/Bluetooth/NFC host-based multiradio module
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-05-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-05-24
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: XPYEMMYW161 Grant Date: 08/24/20162018-03-20
13.56 MHzChange in identification of presently authorized equipment. Original FCC ID: XPYEMMYW161 Grant Date: 08/24/20162018-03-20
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: XPYEMMYW161 Grant Date: 08/24/20162018-03-20

Exhibits

DocumentTypeAvailableFile
TempConfidential_Document-User Manual_Install_R2Users Manual2018-11-21PDF 3.3 MB
TempConfidential_Document-User Manual_Install_add more info.Users Manual2018-11-21PDF 226.9 KB
TempConfidential_Photos-Internal_R2Internal Photos2018-11-21PDF 2 MB
TempConfidential_Photos-External_R1External Photos2018-11-21PDF 518.1 KB
TempConfidential_Photo-ExternalExternal Photos2018-09-17PDF 115.2 KB
Document-Label LocationID Label/Location Info2018-05-24PDF 122.3 KB
Document-Label SampleID Label/Location Info2018-05-24PDF 372.1 KB
Document-Label Sample and LocationID Label/Location Info2018-03-20PDF 91.5 KB
TempConfidential_Photos-Test Setup_RFTest Setup Photos2018-11-21PDF 604.2 KB
Test Report-BlurtoothTest Report2018-05-24PDF 480.7 KB
Test Report-Blurtooth LETest Report2018-05-24PDF 472.2 KB
Test Report-MPE_R1RF Exposure Info2018-05-24PDF 387.2 KB
Test Report-WLAN 2.4GHzTest Report2018-05-24PDF 592.8 KB
Test Report-WLAN 5GHzTest Report2018-05-24PDF 1.1 MB
Attestation-Confidentiality RequestCover Letter(s)2018-03-20PDF 93.7 KB
Cover Letter-Contanct AuthorizationCover Letter(s)2018-05-24PDF 89.7 KB
Cover Letter-Description of Change_R2Cover Letter(s)2018-05-24PDF 121.3 KB
Request for Confidentiality_R1Cover Letter(s)2018-05-24PDF 41.4 KB
Cover Letter-Change RequestCover Letter(s)2018-03-20PDF 128.2 KB
Cover Letter-Change in ID Authorization LetterCover Letter(s)2018-03-20PDF 63 KB
Cover Letter-Contact AuthorizationCover Letter(s)2018-03-20PDF 93.2 KB
Confidential_Technical-SW Operational Description Metadata onlyOperational DescriptionPDF 321 KB

Application Information

Application IDNRVaEdsLq+zC4W02hHDZ2A==
Final Action Date2018-05-24
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0023060049
ModelPD5-WIFI
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWLAN/Bluetooth/NFC host-based multiradio module
Responsible PartyAlan Johnson, Director, Hardware Engineering, alan_johnson@trimble.com , 612-816-2128
Technical ContactIda Chen, BV Consumer Products Services (HK) Ltd., Taoyuan, ida.chen@tw.bureauveritas.com
Test FirmEric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@tw.bureauveritas.com , +886-3-2641570
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/21/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsRF output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End- users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE) and NFC transmitters. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. C2PC application, to integrate the module into a specific host (PD5, branded by PeopleNet). The RF features supported in this specific host are only for 2.4GHz channels 1-11 and 5GHz bands of 5180-5240 MHz and 5745-5825 MHz (NFC, 2.4G channels 12-13, 5G bands of 5260-5320 and 5500-5700 MHz are disabled via software/firmware), as documented in this filing. This host along with the module installed has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
NRVaEdsLq+zC4W02hHDZ2A==2018-05-24Class II permissive change or modification of presently authorized equipment
N0nnO6QX81YIMnonJ455eg==2018-05-24Class II permissive change or modification of presently authorized equipment
rhTITERVlpORKAz1wA5zag==2018-03-20Change in identification of presently authorized equipment. Original FCC ID: XPYEMMYW161 Grant Date: 08/24/2016
n5yFSCJNzomIScMR2cjYLQ==2018-03-20Change in identification of presently authorized equipment. Original FCC ID: XPYEMMYW161 Grant Date: 08/24/2016
W3sI0bSiCgmUSA5ZFHrs8w==2018-03-20Change in identification of presently authorized equipment. Original FCC ID: XPYEMMYW161 Grant Date: 08/24/2016

Equipment Authorization

FrequencyOutputRulesGrant Notes
13.56 MHz15CCC
2402-2480 MHz0.0087115CCC
2402-2480 MHz0.0017815CCC
2412-2472 MHz0.4897815CCC
5180-5240 MHz0.0436515E38, CC
5260-5320 MHz0.0501115E38, CC
5500-5700 MHz0.0288415E38, CC
5745-5825 MHz0.0208915E38, CC

Grants

TCB Grant - Application W3sI0bSiCgmUSA5ZFHrs8w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/20/2018

Application Dated: 03/19/2018
PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-PD5-WIFI
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Digital Transmission System
Notes: WLAN/Bluetooth/NFC host-based multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00871  
CC 15C 2402.0  -  2480.0 0.00178  
CC 15C 2412.0  -  2472.0 0.48978  

RF output power is conducted. Modular Approval. The RF output power of the device at 2468 MHz (channel 12) and 2472 MHz (channel 13) is reduced for compliance reasons as described in the filing documents.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End- users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz and 40 MHz bandwidth modes. This device also contains NFC and U-NII transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application W3sI0bSiCgmUSA5ZFHrs8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
United States
  Date of Grant: 03/20/2018

Application Dated: 03/19/2018
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-PD5-WIFI
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Digital Transmission System
Notes: WLAN/Bluetooth/NFC host-based multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00871  
CC 15C 2402.0  -  2480.0 0.00178  
CC 15C 2412.0  -  2472.0 0.48978  

RF output power is conducted. Modular Approval. The RF output power of the device at 2468 MHz (channel 12) and 2472 MHz (channel 13) is reduced for compliance reasons as described in the filing documents.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End- users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz and 40 MHz bandwidth modes. This device also contains NFC and U-NII transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application rhTITERVlpORKAz1wA5zag==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/20/2018

Application Dated: 03/19/2018
PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-PD5-WIFI
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN/Bluetooth/NFC host-based multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.04365  
38 CC 15E 5260.0  -  5320.0 0.05011  
38 CC 15E 5500.0  -  5700.0 0.02884  
38 CC 15E 5745.0  -  5825.0 0.02089  

RF output power listed is conducted. Modular Approval.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End- users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE) and NFC transmitters.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application rhTITERVlpORKAz1wA5zag==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
United States
  Date of Grant: 03/20/2018

Application Dated: 03/19/2018
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-PD5-WIFI
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN/Bluetooth/NFC host-based multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.04365  
38 CC 15E 5260.0  -  5320.0 0.05011  
38 CC 15E 5500.0  -  5700.0 0.02884  
38 CC 15E 5745.0  -  5825.0 0.02089  

RF output power listed is conducted. Modular Approval.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End- users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE) and NFC transmitters.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application NRVaEdsLq+zC4W02hHDZ2A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/24/2018

Application Dated: 05/24/2018
PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-PD5-WIFI
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN/Bluetooth/NFC host-based multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.04365  
38 CC 15E 5260.0  -  5320.0 0.05011  
38 CC 15E 5500.0  -  5700.0 0.02884  
38 CC 15E 5745.0  -  5825.0 0.02089  

RF output power listed is conducted. Modular Approval.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End- users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE) and NFC transmitters.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

C2PC application, to integrate the module into a specific host (PD5, branded by PeopleNet). The RF features supported in this specific host are only for 2.4GHz channels 1-11 and 5GHz bands of 5180-5240 MHz and 5745-5825 MHz (NFC, 2.4G channels 12-13, 5G bands of 5260-5320 and 5500-5700 MHz are disabled via software/firmware), as documented in this filing. This host along with the module installed has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application NRVaEdsLq+zC4W02hHDZ2A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
United States
  Date of Grant: 05/24/2018

Application Dated: 05/24/2018
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-PD5-WIFI
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN/Bluetooth/NFC host-based multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.04365  
38 CC 15E 5260.0  -  5320.0 0.05011  
38 CC 15E 5500.0  -  5700.0 0.02884  
38 CC 15E 5745.0  -  5825.0 0.02089  

RF output power listed is conducted. Modular Approval.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End- users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE) and NFC transmitters.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

C2PC application, to integrate the module into a specific host (PD5, branded by PeopleNet). The RF features supported in this specific host are only for 2.4GHz channels 1-11 and 5GHz bands of 5180-5240 MHz and 5745-5825 MHz (NFC, 2.4G channels 12-13, 5G bands of 5260-5320 and 5500-5700 MHz are disabled via software/firmware), as documented in this filing. This host along with the module installed has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application n5yFSCJNzomIScMR2cjYLQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/20/2018

Application Dated: 03/19/2018
PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-PD5-WIFI
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: WLAN/Bluetooth/NFC host-based multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  

Modular Approval.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures.

The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE), 2.4 GHz WLAN and U-NII transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application n5yFSCJNzomIScMR2cjYLQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
United States
  Date of Grant: 03/20/2018

Application Dated: 03/19/2018
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-PD5-WIFI
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: WLAN/Bluetooth/NFC host-based multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  

Modular Approval.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures.

The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE), 2.4 GHz WLAN and U-NII transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application N0nnO6QX81YIMnonJ455eg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/24/2018

Application Dated: 05/24/2018
PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-PD5-WIFI
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Digital Transmission System
Notes: WLAN/Bluetooth/NFC host-based multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00871  
CC 15C 2402.0  -  2480.0 0.00178  
CC 15C 2412.0  -  2472.0 0.48978  

RF output power is conducted. Modular Approval. The RF output power of the device at 2468 MHz (channel 12) and 2472 MHz (channel 13) is reduced for compliance reasons as described in the filing documents.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End- users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz and 40 MHz bandwidth modes. This device also contains NFC and U-NII transmitters.

C2PC application, to integrate the module into a specific host (PD5, branded by PeopleNet). The RF features supported in this specific host are only for 2.4GHz channels 1-11 and 5GHz bands of 5180-5240 MHz and 5745-5825 MHz (NFC, 2.4G channels 12-13, 5G bands of 5260-5320 and 5500-5700 MHz are disabled via software/firmware), as documented in this filing. This host along with the module installed has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application N0nnO6QX81YIMnonJ455eg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

PeopleNet Communications Corporation
4400 Baker Road,
Minnetonka, MN 55343
United States
  Date of Grant: 05/24/2018

Application Dated: 05/24/2018
 
Attention: Alan Johnson , Director, Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NKS-PD5-WIFI
Name of Grantee:  PeopleNet Communications Corporation
Equipment Class: Digital Transmission System
Notes: WLAN/Bluetooth/NFC host-based multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00871  
CC 15C 2402.0  -  2480.0 0.00178  
CC 15C 2412.0  -  2472.0 0.48978  

RF output power is conducted. Modular Approval. The RF output power of the device at 2468 MHz (channel 12) and 2472 MHz (channel 13) is reduced for compliance reasons as described in the filing documents.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End- users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz and 40 MHz bandwidth modes. This device also contains NFC and U-NII transmitters.

C2PC application, to integrate the module into a specific host (PD5, branded by PeopleNet). The RF features supported in this specific host are only for 2.4GHz channels 1-11 and 5GHz bands of 5180-5240 MHz and 5745-5825 MHz (NFC, 2.4G channels 12-13, 5G bands of 5260-5320 and 5500-5700 MHz are disabled via software/firmware), as documented in this filing. This host along with the module installed has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: