FCC ID NM5-MB-HP
Outdoor Transmitter
by YDI Wireless
Grantee Code: NM5 Product Code: MBHP
Latest application date: 2005-10-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5725-5850 MHz | Class II permissive change or modification of presently authorized equipment | 2005-10-20 |
| 5725-5850 MHz | Class II permissive change or modification of presently authorized equipment | 2004-09-02 |
| 5725-5850 MHz | Original Equipment | 2004-07-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual Marquee P MP | Users Manual | 2005-10-20 | PDF 1.9 MB |
| Manual Marquee P P | Users Manual | 2005-10-20 | PDF 2.3 MB |
| Manual | Users Manual | 2004-09-02 | PDF 793.1 KB |
| Manual | Users Manual | 2004-07-08 | PDF 792.9 KB |
| Internal Photo of RF Board without shielding can | Internal Photos | 2004-07-08 | PDF 207.6 KB |
| Internal Photos | Internal Photos | 2004-07-08 | PDF 1.2 MB |
| External Photos | External Photos | 2004-07-08 | PDF 125.6 KB |
| Label | ID Label/Location Info | 2004-07-08 | PDF 112.4 KB |
| Antenna Specifications | Operational Description | 2004-09-02 | PDF 202.4 KB |
| Antenna Specifications 16dBi Sector Antenna | Operational Description | 2004-07-08 | PDF 114.5 KB |
| Antenna Specifications 34 6dBi Parabolic | Operational Description | 2004-07-08 | PDF 111.8 KB |
| Antenna Specifications MTI 12 23 28dBi Antennas | Operational Description | 2004-07-08 | PDF 1.8 MB |
| Test Setup Photos | Test Setup Photos | 2005-10-20 | PDF 80.7 KB |
| Test Setup Photos | Test Setup Photos | 2004-09-02 | PDF 419 KB |
| Test Setup Photos | Test Setup Photos | 2004-07-08 | PDF 692.5 KB |
| Technical Report | Test Report | 2005-10-20 | PDF 296.7 KB |
| Test Report | Test Report | 2004-09-02 | PDF 306.1 KB |
| Test Report | Test Report | 2004-07-08 | PDF 395.8 KB |
| Antenna Data Sheet | Cover Letter(s) | 2005-10-20 | PDF 14.3 KB |
| Class II Permissive Change | Cover Letter(s) | 2005-10-20 | PDF 26.2 KB |
| Response to TCB Findings | Cover Letter(s) | 2005-10-20 | PDF 36 KB |
| Class II PC Cover Letter | Cover Letter(s) | 2004-09-02 | PDF 38.3 KB |
| Response to TCB Findings | Cover Letter(s) | 2004-09-02 | PDF 47.2 KB |
| Confidentiality Request | Cover Letter(s) | 2004-07-08 | PDF 17.5 KB |
| Response to TCB Findings | Cover Letter(s) | 2004-07-08 | PDF 63.6 KB |
| RF Exposure Information | RF Exposure Info | 2004-09-02 | PDF 68.7 KB |
| MPE Calculation | RF Exposure Info | 2004-07-08 | PDF 8.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 5.8 KB | |
| Schematics Amp Metadata only | Schematics | PDF 149 KB | |
| Schematics RF board Metadata only | Schematics | PDF 130.7 KB | |
| Chipset Specs Metadata only | Operational Description | PDF 1 MB | |
| Operational Description Metadata only | Operational Description | PDF 63.8 KB |
Application Information
| Application ID | 8zqlwvCxWV5k5TEQUUN9IQ== |
|---|---|
| Final Action Date | 2005-10-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006891675 |
| Model | MB-HP |
| Frequency Range | 5725-5850 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Outdoor Transmitter |
| Responsible Party | John Hutchings, Product Integrity Manager, jhutchings@ydi.com  , 413-665-8551 |
| Test Firm | Dori Robertson, BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC., dolores.robertson@us.bureauveritas.com  , 978 486 8880 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change filing to add new antenna. Power listed is at the antenna terminal. This device must be professionally installed. Only the antennas listed in this filing can be used with this device. Operation is restricted to point-to-point applications except for the omni-directional and sector antennas. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In the case of dish antenna the minimum separation distance must be 2.56 meters. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 8zqlwvCxWV5k5TEQUUN9IQ== | 2005-10-20 | Class II permissive change or modification of presently authorized equipment |
| 03m7OH9KnejK2ejUHkofyw== | 2004-09-02 | Class II permissive change or modification of presently authorized equipment |
| K1CXomEs0BA9uJ4jYwFLVA== | 2004-07-08 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application K1CXomEs0BA9uJ4jYwFLVA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 07/08/2004 Application Dated: 07/08/2004 |
| YDI Wireless |
| 20 Industrial Drive East |
| Deerfield, MA 01373 |
| Attention: John Hutchings , Product Integrity Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NM5-MB-HP |
| Name of Grantee: | YDI Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 5725.0 - 5850.0 | 0.24 |
| Power listed is at the antenna terminal. This device must be professionally installed. Only the antennas listed in this filing can be used with this device. Operation is restricted to point-to-point applications except for the omni-directional and sector antennas. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In the case of dish antenna the minimum separation distance must be 2.35 meters. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application K1CXomEs0BA9uJ4jYwFLVA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
YDI Wireless 20 Industrial Drive East Deerfield, MA 01373 United States |
Date of Grant: 07/08/2004 Application Dated: 07/08/2004 |
| Attention: John Hutchings , Product Integrity Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NM5-MB-HP |
| Name of Grantee: | YDI Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 5725.0 - 5850.0 | 0.24 |
| Power listed is at the antenna terminal. This device must be professionally installed. Only the antennas listed in this filing can be used with this device. Operation is restricted to point-to-point applications except for the omni-directional and sector antennas. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In the case of dish antenna the minimum separation distance must be 2.35 meters. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 10/20/2005 Application Dated: 10/20/2005 |
| YDI Wireless |
| 20 Industrial Drive East |
| Deerfield, MA 01373 |
| Attention: John Hutchings , Product Integrity Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NM5-MB-HP |
| Name of Grantee: | YDI Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 5725.0 - 5850.0 | 0.24 |
| Class II Permissive Change filing to add new antenna. Power listed is at the antenna terminal. This device must be professionally installed. Only the antennas listed in this filing can be used with this device. Operation is restricted to point-to-point applications except for the omni-directional and sector antennas. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In the case of dish antenna the minimum separation distance must be 2.56 meters. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 8zqlwvCxWV5k5TEQUUN9IQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
YDI Wireless 20 Industrial Drive East Deerfield, MA 01373 United States |
Date of Grant: 10/20/2005 Application Dated: 10/20/2005 |
| Attention: John Hutchings , Product Integrity Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NM5-MB-HP |
| Name of Grantee: | YDI Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 5725.0 - 5850.0 | 0.24 |
| Class II Permissive Change filing to add new antenna. Power listed is at the antenna terminal. This device must be professionally installed. Only the antennas listed in this filing can be used with this device. Operation is restricted to point-to-point applications except for the omni-directional and sector antennas. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In the case of dish antenna the minimum separation distance must be 2.56 meters. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 09/02/2004 Application Dated: 09/02/2004 |
| YDI Wireless |
| 20 Industrial Drive East |
| Deerfield, MA 01373 |
| Attention: John Hutchings , Product Integrity Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NM5-MB-HP |
| Name of Grantee: | YDI Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 5725.0 - 5850.0 | 0.24 |
| Class II Permissive Change filing to add new antenna models. Power listed is at the antenna terminal. This device must be professionally installed. Only the antennas listed in this filing can be used with this device. Operation is restricted to point-to-point applications except for the omni-directional and sector antennas. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In the case of dish antenna the minimum separation distance must be 2.56 meters. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 03m7OH9KnejK2ejUHkofyw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
YDI Wireless 20 Industrial Drive East Deerfield, MA 01373 United States |
Date of Grant: 09/02/2004 Application Dated: 09/02/2004 |
| Attention: John Hutchings , Product Integrity Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NM5-MB-HP |
| Name of Grantee: | YDI Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 5725.0 - 5850.0 | 0.24 |
| Class II Permissive Change filing to add new antenna models. Power listed is at the antenna terminal. This device must be professionally installed. Only the antennas listed in this filing can be used with this device. Operation is restricted to point-to-point applications except for the omni-directional and sector antennas. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. In the case of dish antenna the minimum separation distance must be 2.56 meters. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |