FCC ID NM8PI06100

Windows Phone

by HTC Corporation

Grantee Code: NM8   Product Code: PI06100
Latest application date: 2011-09-14

FCC ID Device Details

FCC IDNM8PI06100
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNM8
Product CodePI06100
Applicant BusinessHTC Corporation 🇹🇼
Related Domains htc.com
Equipment ClassWindows Phone
Test FirmSGS TAIWAN LTD.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzOriginal Equipment2011-09-14
2402-2480 MHzOriginal Equipment2011-09-14
2412-2462 MHzOriginal Equipment2011-09-14

Exhibits

DocumentTypeAvailableFile
user manual 1 of 2Users Manual2012-03-11PDF 1.1 MB
user manual 2 of 2 (Updated)Users Manual2012-03-11PDF 470.1 KB
internal PhotoInternal Photos2012-03-11PDF 1.1 MB
External PhotoExternal Photos2012-03-11PDF 819.6 KB
labelID Label/Location Info2011-09-14PDF 22.1 KB
label & LocationID Label/Location Info2011-09-14PDF 22.1 KB
RF Setup PhotoTest Setup Photos2012-03-11PDF 466.4 KB
SAR Setup Photo (Updated)Test Setup Photos2012-03-11PDF 619.4 KB
RF test ReportTest Report2011-09-14PDF 1.3 MB
RF test ReportTest Report2011-09-14PDF 1.1 MB
RF test ReportTest Report2011-09-14PDF 1.1 MB
SAR ReportTest Report2011-09-14PDF 4.7 MB
DoC Attestation LetterAttestation Statements2011-09-14PDF 23.6 KB
Authorization letterCover Letter(s)2011-09-14PDF 18 KB
Supersede LetterCover Letter(s)2011-09-14PDF 14 KB
confidential LetterCover Letter(s)2011-09-14PDF 29.2 KB
SAR Report.RF Exposure Info2011-09-14PDF 4.7 MB

Application Information

Application IDVi+lUBNjNEaE8QDe6DITLQ==
Final Action Date2011-09-14
Application PurposeOriginal Equipment
Applicant FRN0018127647
ModelPI06100
Frequency Range824.2-848.8 MHz
Equipment ClassPCE - PCS Licensed Transmitter held to ear
Device DescriptionWindows Phone
Responsible PartyHedy Hsieh, Hedy_Hsieh@htc.com , 886289124138
Test FirmNELSON BAI, SGS TAIWAN LTD., nelson.bai@sgs.com , 886-2-22993279
TCB Emailtcb@siemic.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/11/2012
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is ERP/EIRP. This device was tested with a 1.0 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user body. . The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The Highest SAR value of head, DTM and product specific mode for this FCC ID is : 0.36 W/kg , 0.84W/kg , 1.36 W/kg respectively.

Applications

Application IDDatePurpose
Vi+lUBNjNEaE8QDe6DITLQ==2011-09-14Original Equipment
L3KAtlkbqGC/ftJ98XoLJg==2011-09-14Original Equipment
8ldZFYWg7pH5hMh1JfaM5Q==2011-09-14Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.2-848.8 MHz1.180.08ppm245KGXW22H
1850.2-1909.8 MHz0.5830.09ppm254KGXW24E
2402-2480 MHz0.001550015CCC
2412-2462 MHz0.049550015CCC

Grants

TCB Grant - Application Vi+lUBNjNEaE8QDe6DITLQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 09/14/2011

Application Dated: 09/13/2011
HTC Corporation
1F, 6-3 Baoqiang Road, Xindian District,
New Taipei City, 231
Taiwan
 
Attention: Hedy Hsieh

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NM8PI06100
Name of Grantee:  HTC Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Windows Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.18 0.08  PM 245KGXW
24E 1850.2  -  1909.8 0.583 0.09  PM 254KGXW

Output power is ERP/EIRP.

This device was tested with a 1.0 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user body. . The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The Highest SAR value of head, DTM and product specific mode for this FCC ID is : 0.36 W/kg , 0.84W/kg , 1.36 W/kg respectively.


EAS Grant - Application Vi+lUBNjNEaE8QDe6DITLQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HTC Corporation
1F, 6-3 Baoqiang Road, Xindian District,
New Taipei City, 231
Taiwan
  Date of Grant: 09/14/2011

Application Dated: 09/13/2011
 
Attention: Hedy Hsieh

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NM8PI06100
Name of Grantee:  HTC Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Windows Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.18 0.08  PM 245KGXW
24E 1850.2  -  1909.8 0.583 0.09  PM 254KGXW

Output power is ERP/EIRP.

This device was tested with a 1.0 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user body. . The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The Highest SAR value of head, DTM and product specific mode for this FCC ID is : 0.36 W/kg , 0.84W/kg , 1.36 W/kg respectively.



TCB Grant - Application L3KAtlkbqGC/ftJ98XoLJg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 09/14/2011

Application Dated: 09/13/2011
HTC Corporation
1F, 6-3 Baoqiang Road, Xindian District,
New Taipei City, 231
Taiwan
 
Attention: Hedy Hsieh

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NM8PI06100
Name of Grantee:  HTC Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Windows Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00155  

Output power is conducted.

This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The Highest SAR value of product specific for this FCC ID is : < 0.1 W/kg


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application L3KAtlkbqGC/ftJ98XoLJg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HTC Corporation
1F, 6-3 Baoqiang Road, Xindian District,
New Taipei City, 231
Taiwan
  Date of Grant: 09/14/2011

Application Dated: 09/13/2011
 
Attention: Hedy Hsieh

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NM8PI06100
Name of Grantee:  HTC Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Windows Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00155  

Output power is conducted.

This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The Highest SAR value of product specific for this FCC ID is : < 0.1 W/kg


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8ldZFYWg7pH5hMh1JfaM5Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 09/14/2011

Application Dated: 09/13/2011
HTC Corporation
1F, 6-3 Baoqiang Road, Xindian District,
New Taipei City, 231
Taiwan
 
Attention: Hedy Hsieh

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NM8PI06100
Name of Grantee:  HTC Corporation
Equipment Class: Digital Transmission System
Notes: Windows Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.04955  

Output power is conducted.

This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1.0 cms and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The Highest SAR value of head and product specific for this FCC ID is : 0.13 W/kg , 0.24W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8ldZFYWg7pH5hMh1JfaM5Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HTC Corporation
1F, 6-3 Baoqiang Road, Xindian District,
New Taipei City, 231
Taiwan
  Date of Grant: 09/14/2011

Application Dated: 09/13/2011
 
Attention: Hedy Hsieh

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NM8PI06100
Name of Grantee:  HTC Corporation
Equipment Class: Digital Transmission System
Notes: Windows Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.04955  

Output power is conducted.

This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1.0 cms and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The Highest SAR value of head and product specific for this FCC ID is : 0.13 W/kg , 0.24W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: