FCC ID NOO-S2182-011

InterReach Spectrum 800/1900 MHz HP MRAU

by ADC Telecommunications Inc.

Grantee Code: NOO   Product Code: S2182011
Latest application date: 2014-04-23

FCC ID Device Details

FCC IDNOO-S2182-011
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNOO
Product CodeS2182011
Applicant BusinessADC Telecommunications Inc. 🇺🇸
Related Domains commscope.com te.com
Equipment ClassInterReach Spectrum 800/1900 MHz HP MRAU
Test FirmIntertek Testing Services NA, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
851-862 MHzOriginal Equipment2014-04-23
862-869 MHzOriginal Equipment2014-04-23
851-869 MHzOriginal Equipment2014-01-14

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2014-04-23PDF 2.4 MB
Internal PhotosInternal Photos2014-04-23PDF 851.3 KB
External PhotosExternal Photos2014-04-23PDF 851.3 KB
B2I LabelID Label/Location Info2014-04-23PDF 440.7 KB
B9B Label TextID Label/Location Info2014-04-23PDF 486.5 KB
Class B Booster Warning LabelID Label/Location Info2014-04-23PDF 486.5 KB
Explicit Class B Booster Declaration LabelID Label/Location Info2014-04-23PDF 191.6 KB
FCC LabelID Label/Location Info2014-04-23PDF 235.4 KB
FCC Label TextID Label/Location Info2014-04-23PDF 235.4 KB
Label LocationID Label/Location Info2014-04-23PDF 57 KB
Test Setup PhotosTest Setup Photos2014-04-23PDF 315.9 KB
Amended Test ReportTest Report2014-04-23PDF 1.2 MB
Radiated Emissions Test ReportTest Report2014-04-23PDF 1 MB
Test ReportTest Report2014-04-23PDF 1.1 MB
Test Report Radiated emissionsTest Report2014-04-23PDF 1 MB
Warning Label Attestation StatementAttestation Statements2014-04-23PDF 26.2 KB
Warning label attestationAttestation Statements2014-04-23PDF 26.2 KB
Confidentiality RequestCover Letter(s)2014-04-23PDF 15.4 KB
Letter of AgencyCover Letter(s)2014-04-23PDF 13 KB
RF ExposureRF Exposure Info2014-04-23PDF 35.9 KB
RF Exposure PCSRF Exposure Info2014-04-23PDF 34.3 KB
Amended Block Diagram Metadata onlyBlock DiagramPDF 29.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 106.2 KB
Schematic Metadata onlySchematicsPDF 369.7 KB
Amended Operational Description Metadata onlyOperational DescriptionPDF 42.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 42.5 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 97.7 KB
Duplexer Information Metadata onlyParts List/Tune Up InfoPDF 59.6 KB
Duplexer info Metadata onlyParts List/Tune Up InfoPDF 59.6 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 28.9 KB
Tune Up Procedures Metadata onlyParts List/Tune Up InfoPDF 28.9 KB

Application Information

Application IDXvbbGI6CPDOCP9AK0JJa+g==
Final Action Date2014-04-23
Application PurposeOriginal Equipment
Applicant FRN0008274896
ModelS2182-011
Frequency Range851-862 MHz
Equipment ClassB9B - Part 90 Class B Industrial Booster (non-SMR)
Device DescriptionInterReach Spectrum 800/1900 MHz HP MRAU
Responsible PartyJoshua Wittman, Compliance Engineer, Joshua.Wittman@commscope.com , 952-403-8322
Technical ContactJoshua J. Wittman, ADC Telecommunications Inc, joshua.wittman@te.com , 952-403-8322
Non-Technical ContactJoshua J. Wittman, ADC Telecommunications Inc, joshua.wittman@te.com , 952-403-8322
Test FirmAndrew Waytulonis, Intertek Testing Services NA, Inc., andrew.waytulonis@intertek.com , 651-730-1188
TCB EmailTCB_Admin@intertek.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsBooster. Power output listed is conducted and is composite for multi-channel operation. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307 (b) (3) for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules. This application covers only the Remote Access Unit downlink system configuration as a DAS remote unit with the uplink hardwired to an operator's base station as described in the filing; excluding any over the air configuration on the uplink side of the Remote Access Unit. Operations if any with an antenna connected to the uplink require a separate equipment authorization.

Applications

Application IDDatePurpose
XvbbGI6CPDOCP9AK0JJa+g==2014-04-23Original Equipment
LtpOkgzZYr4WghawurdxYw==2014-04-23Original Equipment
SxmJS5/vvLLwg4TDPbM/nA==2014-01-14Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
851-862 MHz0.4508100AmpF1D90
851-869 MHz0.09418AmpG7W90S
851-869 MHz0.49545AmpF1D90S
851-869 MHz0.08823AmpF9W90S
851-869 MHz0.0679AmpD7D90S
862-869 MHz0.09311AmpG7W90S
862-869 MHz0.08452AmpF9W90S
1930-1995 MHz0.5662AmpGXW24E
1930-1995 MHz0.6067AmpG7W24E
1930-1995 MHz0.3589AmpF9W24E
1930-1995 MHz0.2506AmpD7D24E

Grants

TCB Grant - Application XvbbGI6CPDOCP9AK0JJa+g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
Date of Grant: 04/23/2014

Application Dated: 02/11/2014
ADC Telecommunications Inc.
501 Shenandoah Drive
Shakopee, MN 55379
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NOO-S2182-011
Name of Grantee:  ADC Telecommunications Inc.
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: InterReach Spectrum 800/1900 MHz HP MRAU
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 851.0  -  862.0 0.45081  Amp F1D

Booster. Power output listed is conducted and is composite for multi-channel operation. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307 (b) (3) for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules. This application covers only the Remote Access Unit downlink system configuration as a DAS remote unit with the uplink hardwired to an operator's base station as described in the filing; excluding any over the air configuration on the uplink side of the Remote Access Unit. Operations if any with an antenna connected to the uplink require a separate equipment authorization.

EAS Grant - Application XvbbGI6CPDOCP9AK0JJa+g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ADC Telecommunications Inc.
501 Shenandoah Drive
Shakopee, MN 55379
United States
  Date of Grant: 04/23/2014

Application Dated: 02/11/2014
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NOO-S2182-011
Name of Grantee:  ADC Telecommunications Inc.
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: InterReach Spectrum 800/1900 MHz HP MRAU
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 851.0  -  862.0 0.45081  Amp F1D

Booster. Power output listed is conducted and is composite for multi-channel operation. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307 (b) (3) for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules. This application covers only the Remote Access Unit downlink system configuration as a DAS remote unit with the uplink hardwired to an operator's base station as described in the filing; excluding any over the air configuration on the uplink side of the Remote Access Unit. Operations if any with an antenna connected to the uplink require a separate equipment authorization.



TCB Grant - Application SxmJS5/vvLLwg4TDPbM/nA==

This application does not exist.

EAS Grant - Application SxmJS5/vvLLwg4TDPbM/nA==

This application currently is not in final status.

TCB Grant - Application LtpOkgzZYr4WghawurdxYw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
Date of Grant: 04/23/2014

Application Dated: 02/11/2014
ADC Telecommunications Inc.
501 Shenandoah Drive
Shakopee, MN 55379
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NOO-S2182-011
Name of Grantee:  ADC Telecommunications Inc.
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: InterReach Spectrum 800/1900 MHz HP MRAU
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90S 862.0  -  869.0 0.09311  Amp G7W
90S 862.0  -  869.0 0.08452  Amp F9W
24E 1930.0  -  1995.0 0.5662  Amp GXW
24E 1930.0  -  1995.0 0.6067  Amp G7W
24E 1930.0  -  1995.0 0.3589  Amp F9W
24E 1930.0  -  1995.0 0.2506  Amp D7D

Booster. Power output listed is conducted and is composite for multi-channel operation. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b) (3) for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules. This application covers only the Remote Access Unit downlink system configuration as a DAS remote unit with the uplink hardwired to an operator's base station as described in the filing; excluding any over the air configuration on the uplink side of the Remote Access Unit. Operations if any with an antenna connected to the uplink require a separate equipment authorization.

EAS Grant - Application LtpOkgzZYr4WghawurdxYw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ADC Telecommunications Inc.
501 Shenandoah Drive
Shakopee, MN 55379
United States
  Date of Grant: 04/23/2014

Application Dated: 02/11/2014
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NOO-S2182-011
Name of Grantee:  ADC Telecommunications Inc.
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: InterReach Spectrum 800/1900 MHz HP MRAU
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90S 862.0  -  869.0 0.09311  Amp G7W
90S 862.0  -  869.0 0.08452  Amp F9W
24E 1930.0  -  1995.0 0.5662  Amp GXW
24E 1930.0  -  1995.0 0.6067  Amp G7W
24E 1930.0  -  1995.0 0.3589  Amp F9W
24E 1930.0  -  1995.0 0.2506  Amp D7D

Booster. Power output listed is conducted and is composite for multi-channel operation. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b) (3) for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules. This application covers only the Remote Access Unit downlink system configuration as a DAS remote unit with the uplink hardwired to an operator's base station as described in the filing; excluding any over the air configuration on the uplink side of the Remote Access Unit. Operations if any with an antenna connected to the uplink require a separate equipment authorization.



Mail To: