FCC ID NOOFSN-809019-1
InterReach Fusion FSN-809019-1
by ADC Telecommunications Inc.
Grantee Code: NOO Product Code: FSN8090191
Latest application date: 2006-08-31
FCC ID Device Details
| FCC ID | NOOFSN-809019-1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | NOO |
| Product Code | FSN8090191 |
| Applicant Business | ADC Telecommunications Inc. 🇺🇸 |
| Related Domains |  commscope.com |
| Equipment Class | InterReach Fusion FSN-809019-1 |
| Test Firm | MET Laboratories |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 1930-1995 MHz | Original Equipment | 2006-08-31 |
| 851-869 MHz | Original Equipment | 2006-08-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2006-08-31 | PDF 2.3 MB |
| Users Instruction Manual | Users Manual | 2006-08-31 | PDF 2.3 MB |
| Users Manual | Users Manual | 2006-08-31 | PDF 2.3 MB |
| Internal Photographs | Internal Photos | 2006-08-31 | PDF 826.5 KB |
| Internal Photos | Internal Photos | 2006-08-31 | PDF 826.5 KB |
| External Photographs | External Photos | 2006-08-31 | PDF 965.9 KB |
| External Photos | External Photos | 2006-08-31 | PDF 965.9 KB |
| Label Information | ID Label/Location Info | 2006-08-31 | PDF 460.2 KB |
| label | ID Label/Location Info | 2006-08-31 | PDF 460.2 KB |
| Test Setup Photographs | Test Setup Photos | 2006-08-31 | PDF 185.5 KB |
| Test Setup Photos | Test Setup Photos | 2006-08-31 | PDF 185.5 KB |
| Test Report | Test Report | 2006-08-31 | PDF 3.4 MB |
| Test Report 1 | Test Report | 2006-08-31 | PDF 1.6 MB |
| Test Report 2 | Test Report | 2006-08-31 | PDF 3.3 MB |
| Agent Auth | Cover Letter(s) | 2006-08-31 | PDF 20.6 KB |
| Agent Authorization | Cover Letter(s) | 2006-08-31 | PDF 20.6 KB |
| Confidentiality | Cover Letter(s) | 2006-08-31 | PDF 20.8 KB |
| Confidentiality Request | Cover Letter(s) | 2006-08-31 | PDF 20.8 KB |
| MET TCB Agreement | Cover Letter(s) | 2006-08-31 | PDF 1.9 MB |
| MPE | RF Exposure Info | 2006-08-31 | PDF 33.5 KB |
| RF Exposure Infomation | RF Exposure Info | 2006-08-31 | PDF 33.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 54 KB | |
| Schematics Metadata only | Schematics | PDF 827.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 259.9 KB | |
| Product Spec Sheet Metadata only | Operational Description | PDF 259.9 KB | |
| TuneUp Procedure Metadata only | Parts List/Tune Up Info | PDF 67.4 KB | |
| Tuneup Procedure Metadata only | Parts List/Tune Up Info | PDF 67.4 KB |
Application Information
| Application ID | 30BjTC4ZT3vBwnmjv5JAsQ== |
|---|---|
| Final Action Date | 2006-08-31 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0008274896 |
| Model | FSN-809019-1 |
| Frequency Range | 1930-1995 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | InterReach Fusion FSN-809019-1 |
| Responsible Party | Joshua Wittman, Compliance Engineer, Joshua.Wittman@commscope.com , 952-403-8322 |
| Test Firm | Alvin Ilarina, MET Laboratories, ailarina@metlabs.com  , 408-919-3774 |
| TCB Email | certifications@metlabs.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output is conducted. Antenna gain is restricted to 1.5 W ERP (2.49 W EIRP) in order to satisfy RF exposure compliance requirements. If higher than 1.5 W ERP, routine MPE evaluation is needed. The antennas should be installed to provide at least 20 cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3) |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 30BjTC4ZT3vBwnmjv5JAsQ== | 2006-08-31 | Original Equipment |
| +hh80g/PZyLU+iAqyrj8hQ== | 2006-08-31 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application 30BjTC4ZT3vBwnmjv5JAsQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 08/31/2006 Application Dated: 08/31/2006 |
| ADC Telecommunications Inc. |
| 501 Shenandoah Drive |
| Shakopee, MN 55379 |
| Attention: Joshua Wittman , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NOOFSN-809019-1 |
| Name of Grantee: | ADC Telecommunications Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | InterReach Fusion FSN-809019-1 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1930.0 - 1995.0 | 0.676 | 0.053 PM | F9W | |
| 24E | 1930.0 - 1995.0 | 0.518 | 0.053 PM | DXW | |
| 24E | 1930.0 - 1995.0 | 0.333 | 0.053 PM | GXW |
| Power Output is conducted. Antenna gain is restricted to 1.5 W ERP (2.49 W EIRP) in order to satisfy RF exposure compliance requirements. If higher than 1.5 W ERP, routine MPE evaluation is needed. The antennas should be installed to provide at least 20 cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3) |
EAS Grant - Application 30BjTC4ZT3vBwnmjv5JAsQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ADC Telecommunications Inc. 501 Shenandoah Drive Shakopee, MN 55379 United States |
Date of Grant: 08/31/2006 Application Dated: 08/31/2006 |
| Attention: Joshua Wittman , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NOOFSN-809019-1 |
| Name of Grantee: | ADC Telecommunications Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | InterReach Fusion FSN-809019-1 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1930.0 - 1995.0 | 0.676 | 0.053 PM | F9W | |
| 24E | 1930.0 - 1995.0 | 0.518 | 0.053 PM | DXW | |
| 24E | 1930.0 - 1995.0 | 0.333 | 0.053 PM | GXW |
| Power Output is conducted. Antenna gain is restricted to 1.5 W ERP (2.49 W EIRP) in order to satisfy RF exposure compliance requirements. If higher than 1.5 W ERP, routine MPE evaluation is needed. The antennas should be installed to provide at least 20 cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3) |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 08/31/2006 Application Dated: 08/31/2006 |
| ADC Telecommunications Inc. |
| 501 Shenandoah Drive |
| Shakopee, MN 55379 |
| Attention: Joshua Wittman , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NOOFSN-809019-1 |
| Name of Grantee: | ADC Telecommunications Inc. |
| Equipment Class: | Amplifier |
| Notes: | InterReach Fusion FSN-809019-1 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 851.0 - 869.0 | 0.49 | 1.0 PM | F7W/GXW | |
| 90 | 935.0 - 941.0 | 0.37 | 1.0 PM | F7W/GXW |
| Power Output is conducted. Antenna gain is restricted to 1.5 W ERP (2.49 W EIRP) in order to satisfy RF exposure compliance requirements. If higher than 1.5 W ERP, routine MPE evaluation is needed. The antennas should be installed to provide at least 20 cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
EAS Grant - Application +hh80g/PZyLU+iAqyrj8hQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ADC Telecommunications Inc. 501 Shenandoah Drive Shakopee, MN 55379 United States |
Date of Grant: 08/31/2006 Application Dated: 08/31/2006 |
| Attention: Joshua Wittman , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NOOFSN-809019-1 |
| Name of Grantee: | ADC Telecommunications Inc. |
| Equipment Class: | Amplifier |
| Notes: | InterReach Fusion FSN-809019-1 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 851.0 - 869.0 | 0.49 | 1.0 PM | F7W/GXW | |
| 90 | 935.0 - 941.0 | 0.37 | 1.0 PM | F7W/GXW |
| Power Output is conducted. Antenna gain is restricted to 1.5 W ERP (2.49 W EIRP) in order to satisfy RF exposure compliance requirements. If higher than 1.5 W ERP, routine MPE evaluation is needed. The antennas should be installed to provide at least 20 cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
| Mail To: |