1. FCC ID
  2. NOO
  3. NOOFSN-8519-1

FCC ID NOOFSN-8519-1

InterReach Fusion Remote Unit (Dual band repeater)

by ADC Telecommunications Inc.

Grantee Code: NOO   Product Code: FSN85191
Latest application date: 2006-09-15

FCC ID Device Details

FCC IDNOOFSN-8519-1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNOO
Product CodeFSN85191
Applicant BusinessADC Telecommunications Inc. 🇺🇸
Related Domains commscope.com
Equipment ClassInterReach Fusion Remote Unit (Dual band repeater)
Test FirmMET Laboratories

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
869-894 MHzClass II permissive change or modification of presently authorized equipment2006-09-15
869-894 MHzOriginal Equipment2006-04-12

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2006-09-15PDF 2.3 MB
Users ManualUsers Manual2006-04-12PDF 1.6 MB
Internal PhotographsInternal Photos2006-04-12PDF 2.1 MB
External PhotosExternal Photos2006-09-15PDF 168.6 KB
External PhotographsExternal Photos2006-04-12PDF 490.2 KB
Label LocationID Label/Location Info2006-04-12PDF 196.5 KB
Label SampleID Label/Location Info2006-04-12PDF 100.6 KB
Test Setup PhotosTest Setup Photos2006-09-15PDF 521.7 KB
Test Setup PhotographsTest Setup Photos2006-04-12PDF 986.5 KB
Test ReportTest Report2006-09-15PDF 3.5 MB
Part 22H Test ReportTest Report2006-04-12PDF 655.8 KB
Part 24E Test ReportTest Report2006-04-12PDF 616.1 KB
revised report part 1Test Report2006-04-12PDF 2.3 MB
revised report part 2Test Report2006-04-12PDF 3.5 MB
revised report pt1Test Report2006-04-12PDF 2.3 MB
revised report pt2Test Report2006-04-12PDF 3.5 MB
LetterCover Letter(s)2006-09-15PDF 22.7 KB
Agent Authorization LetterCover Letter(s)2006-04-12PDF 19.1 KB
CorrespondanceCover Letter(s)2006-04-12PDF 12.3 KB
confidentiality RequestCover Letter(s)2006-04-12PDF 22.5 KB
RF Exposure InformationRF Exposure Info2006-04-12PDF 38 KB
Tune Up ProcedureParts List/Tune Up Info2006-04-12PDF 71.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 45.7 KB
Block diagram Metadata onlyBlock DiagramPDF 50 KB
Cell Schematics Metadata onlySchematicsPDF 271.8 KB
PCS Schematics Metadata onlySchematicsPDF 277.9 KB
Universal Schematics Metadata onlySchematicsPDF 224.9 KB
Data Sheet Metadata onlyOperational DescriptionPDF 256.3 KB
Internal Frequencies Metadata onlyOperational DescriptionPDF 18.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 18.6 KB
Theory of Op Metadata onlyOperational DescriptionPDF 9.9 KB

Application Information

Application IDobnKU+r/UL8eaggBczIr7g==
Final Action Date2006-09-15
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008274896
ModelFSN-8519-1
Frequency Range869-894 MHz
Equipment ClassAMP - Amplifier
Device DescriptionInterReach Fusion Remote Unit (Dual band repeater)
Responsible PartyJoshua Wittman, Compliance Engineer, Joshua.Wittman@commscope.com , 952-403-8322
Test FirmAlvin Ilarina, MET Laboratories, ailarina@metlabs.com , 408-919-3774
TCB Emailcertifications@metlabs.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. The antennas should be installed to provide at least 20 cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Applications

Application IDDatePurpose
obnKU+r/UL8eaggBczIr7g==2006-09-15Class II permissive change or modification of presently authorized equipment
clDCnWC8b4EATwAFg9dh8w==2006-04-12Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
869-894 MHz0.2880.32ppmF1D22H
869-894 MHz0.2180.32ppmDXW22H
869-894 MHz0.3160.32ppmF9W22H
1930-1990 MHz0.2480.3ppmF9W24E
1930-1990 MHz0.3240.3ppmDXW24E
1930-1990 MHz0.240.3ppmGXW24E

Grants

TCB Grant - Application obnKU+r/UL8eaggBczIr7g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
 Date of Grant: 09/15/2006

Application Dated: 09/15/2006
ADC Telecommunications Inc.
501 Shenandoah Drive
Shakopee, MN 55379
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NOOFSN-8519-1
Name of Grantee:  ADC Telecommunications Inc.
Equipment Class: Amplifier
Notes: InterReach Fusion Remote Unit (Dual band repeater)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 869.0  -  894.0 0.288 0.32  PM F1D
22H 869.0  -  894.0 0.218 0.32  PM DXW
22H 869.0  -  894.0 0.316 0.32  PM F9W
24E 1930.0  -  1990.0 0.248 0.3  PM F9W
24E 1930.0  -  1990.0 0.324 0.3  PM DXW
24E 1930.0  -  1990.0 0.24 0.3  PM GXW

Power Output listed is conducted. The antennas should be installed to provide at least 20 cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

EAS Grant - Application obnKU+r/UL8eaggBczIr7g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ADC Telecommunications Inc.
501 Shenandoah Drive
Shakopee, MN 55379
United States 		  Date of Grant: 09/15/2006

Application Dated: 09/15/2006
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NOOFSN-8519-1
Name of Grantee:  ADC Telecommunications Inc.
Equipment Class: Amplifier
Notes: InterReach Fusion Remote Unit (Dual band repeater)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 869.0  -  894.0 0.288 0.32  PM F1D
22H 869.0  -  894.0 0.218 0.32  PM DXW
22H 869.0  -  894.0 0.316 0.32  PM F9W
24E 1930.0  -  1990.0 0.248 0.3  PM F9W
24E 1930.0  -  1990.0 0.324 0.3  PM DXW
24E 1930.0  -  1990.0 0.24 0.3  PM GXW

Power Output listed is conducted. The antennas should be installed to provide at least 20 cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).



TCB Grant - Application clDCnWC8b4EATwAFg9dh8w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
 Date of Grant: 04/12/2006

Application Dated: 04/12/2006
ADC Telecommunications Inc.
501 Shenandoah Drive
Shakopee, MN 55379
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NOOFSN-8519-1
Name of Grantee:  ADC Telecommunications Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FSN-8519-1 InterReach Fusion Remote Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 869.0  -  894.0 0.288 0.32  PM F1D
22H 869.0  -  894.0 0.218 0.32  PM DXW
22H 869.0  -  894.0 0.316 0.32  PM F9W
24E 1930.0  -  1990.0 0.248 0.3  PM F9W
24E 1930.0  -  1990.0 0.324 0.3  PM DXW
24E 1930.0  -  1990.0 0.24 0.3  PM GXW

Power Output is conducted. Antenna gain is restricted to 1.5 W ERP (2.49 W EIRP) in order to satisfy RF exposure compliance requirements. If higher than 1.5 W ERP, routine MPE evaluation is needed. The antennas should be installed to provide at least 20 cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

EAS Grant - Application clDCnWC8b4EATwAFg9dh8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ADC Telecommunications Inc.
501 Shenandoah Drive
Shakopee, MN 55379
United States 		  Date of Grant: 04/12/2006

Application Dated: 04/12/2006
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NOOFSN-8519-1
Name of Grantee:  ADC Telecommunications Inc.
Equipment Class: PCS Licensed Transmitter
Notes: FSN-8519-1 InterReach Fusion Remote Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 869.0  -  894.0 0.288 0.32  PM F1D
22H 869.0  -  894.0 0.218 0.32  PM DXW
22H 869.0  -  894.0 0.316 0.32  PM F9W
24E 1930.0  -  1990.0 0.248 0.3  PM F9W
24E 1930.0  -  1990.0 0.324 0.3  PM DXW
24E 1930.0  -  1990.0 0.24 0.3  PM GXW

Power Output is conducted. Antenna gain is restricted to 1.5 W ERP (2.49 W EIRP) in order to satisfy RF exposure compliance requirements. If higher than 1.5 W ERP, routine MPE evaluation is needed. The antennas should be installed to provide at least 20 cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).



Mail To: