FCC ID NP4-242-5099-100
Wireless Radiomodem
by CalAmp Wireless Networks Corporation
Grantee Code: NP4 Product Code: 2425099100
Latest application date: 2007-01-10
FCC ID Device Details
| FCC ID | NP4-242-5099-100 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | NP4 |
| Product Code | 2425099100 |
| Applicant Business | CalAmp Wireless Networks Corporation 🇺🇸 |
| Related Domains |  calamp.com |
| Equipment Class | Wireless Radiomodem |
| Test Firm | CalAmp Wireless Networks Corp |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.5-927.5 MHz | Class II permissive change or modification of presently authorized equipment | 2007-01-10 |
| 902.5-927.5 MHz | Original Equipment | 2005-05-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2005-05-09 | PDF 627.7 KB |
| Internal photos | Internal Photos | 2005-05-09 | PDF 984.5 KB |
| Internal photos 2 | Internal Photos | 2005-05-09 | PDF 126.1 KB |
| External photos | External Photos | 2005-05-09 | PDF 478.4 KB |
| FCC ID label | ID Label/Location Info | 2005-05-09 | PDF 124.1 KB |
| Setup photos | Test Setup Photos | 2005-05-09 | PDF 2.9 MB |
| test data supporting class II permissive change | Test Report | 2007-01-10 | PDF 185.1 KB |
| Test report revised | Test Report | 2005-05-09 | PDF 1.1 MB |
| Attestation to addition of fixes | Attestation Statements | 2005-05-09 | PDF 17.4 KB |
| authorisation for class II permissive change | Cover Letter(s) | 2007-01-10 | PDF 31.1 KB |
| note on the certificate | Cover Letter(s) | 2007-01-10 | PDF 28.9 KB |
| ATCB comments | Cover Letter(s) | 2005-05-09 | PDF 31.5 KB |
| Request for confidentiality | Cover Letter(s) | 2005-05-09 | PDF 26.3 KB |
| Response to ATCB | Cover Letter(s) | 2005-05-09 | PDF 18.4 KB |
| MPE | RF Exposure Info | 2005-05-09 | PDF 38.1 KB |
| Block diagram 1 Metadata only | Block Diagram | PDF 41.4 KB | |
| Block diagram 2 Metadata only | Block Diagram | PDF 35.4 KB | |
| Schematics 2 Metadata only | Schematics | PDF 579 KB | |
| Schematics rf rev Metadata only | Schematics | PDF 394.3 KB | |
| Operational description Metadata only | Operational Description | PDF 168 KB |
Application Information
| Application ID | KvUkD++YYGZXC7zIPYR6cg== |
|---|---|
| Final Action Date | 2007-01-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004069472 |
| Model | 242-5099-100 |
| Frequency Range | 902.5-927.5 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless Radiomodem |
| Responsible Party | Russell Cook, Director of Engineering, rcook@calamp.com , 612-642-2127 |
| Agent | Constantin Constantin Constantin, Dataradio Inc, cpintilei@dataradio.com  , +1-514-737-7883 |
| Technical Contact | Constantin Pintilei, Dataradio Inc, cpintilei@dataradio.com , +1-514-737-0020 |
| Test Firm | Chris Ludewig, CalAmp Wireless Networks Corp, CLudewig@calamp.com , 507-833-6717 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a minimum separation distance of 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. High gain antenna(s) with a gain over 6dBi must use reduced power levels in accordance with 15.247(b). End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| KvUkD++YYGZXC7zIPYR6cg== | 2007-01-10 | Class II permissive change or modification of presently authorized equipment |
| Um1cIRTYyCfZeVhRZwl/VQ== | 2005-05-09 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.5-927.5 MHz | 0.9790000 | 15C |
Grants
TCB Grant - Application Um1cIRTYyCfZeVhRZwl/VQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/09/2005 Application Dated: 05/09/2005 |
| CalAmp Wireless Networks Corporation |
| 117 Peavey Circle |
| Chaska, MN 55318 |
| Attention: Russell Cook , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NP4-242-5099-100 |
| Name of Grantee: | CalAmp Wireless Networks Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Radiomodem |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.5 | 0.979 |
| Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a minimum separation distance of 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. High gain antenna(s) with a gain over 6dBi must use reduced power levels in accordance with 15.247(b). End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Um1cIRTYyCfZeVhRZwl/VQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CalAmp Wireless Networks Corporation 117 Peavey Circle Chaska, MN 55318 United States |
Date of Grant: 05/09/2005 Application Dated: 05/09/2005 |
| Attention: Russell Cook , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NP4-242-5099-100 |
| Name of Grantee: | CalAmp Wireless Networks Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Radiomodem |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.5 | 0.979 |
| Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a minimum separation distance of 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. High gain antenna(s) with a gain over 6dBi must use reduced power levels in accordance with 15.247(b). End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CalAmp Wireless Networks Corporation 117 Peavey Circle Chaska, MN 55318 United States |
Date of Grant: 01/10/2007 Application Dated: 11/24/2006 |
| Attention: Russell Cook , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NP4-242-5099-100 |
| Name of Grantee: | CalAmp Wireless Networks Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Radiomodem |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.5 | 0.979 |
| Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a minimum separation distance of 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. High gain antenna(s) with a gain over 6dBi must use reduced power levels in accordance with 15.247(b). End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |