FCC ID NR3AIM2FMU
AUTOMATED FUEL MANAGEMENT SYSTEM
by Syn Tech Systems Inc
Grantee Code: NR3 Product Code: AIM2FMU
Latest application date: 2009-10-09
FCC ID Device Details
| FCC ID | NR3AIM2FMU |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | NR3 |
| Product Code | AIM2FMU |
| Applicant Business | Syn Tech Systems Inc 🇺🇸 |
| Equipment Class | AUTOMATED FUEL MANAGEMENT SYSTEM |
| Test Firm | Timco Engineering, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.667-927.667 MHz | Class II permissive change or modification of presently authorized equipment | 2009-10-09 |
| 902.667-927.667 MHz | Class II permissive change or modification of presently authorized equipment | 2009-01-13 |
| 902.667-927.667 MHz | Original Equipment | 2007-02-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2009-01-13 | PDF 7 KB |
| USERS MANUAL | Users Manual | 2007-02-13 | PDF 119.6 KB |
| INTERNAL PHOTOS | Internal Photos | 2007-02-13 | PDF 3.1 MB |
| EXTERNAL PHOTOS | External Photos | 2007-02-13 | PDF 581.8 KB |
| LABEL LOCATION | ID Label/Location Info | 2007-02-13 | PDF 967.5 KB |
| LABEL SAMPLE | ID Label/Location Info | 2007-02-13 | PDF 42 KB |
| Test Setup Photos 1 | Test Setup Photos | 2009-10-09 | PDF 936.7 KB |
| Test Setup Photos 2 | Test Setup Photos | 2009-10-09 | PDF 920 KB |
| Test Setup Photos 3 | Test Setup Photos | 2009-10-09 | PDF 951.9 KB |
| Test Setup Photos 4 | Test Setup Photos | 2009-10-09 | PDF 978.7 KB |
| Test Setup Photos 1 | Test Setup Photos | 2009-01-13 | PDF 936.7 KB |
| Test Setup Photos 2 | Test Setup Photos | 2009-01-13 | PDF 920 KB |
| Test Setup Photos 3 | Test Setup Photos | 2009-01-13 | PDF 951.9 KB |
| Test Setup Photos 4 | Test Setup Photos | 2009-01-13 | PDF 978.7 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2007-02-13 | PDF 275.3 KB |
| Test Report | Test Report | 2009-10-09 | PDF 351.6 KB |
| Revised Test Report | Test Report | 2009-01-13 | PDF 244.3 KB |
| Test Report | Test Report | 2009-01-13 | PDF 244.3 KB |
| TEST REPORT | Test Report | 2007-02-13 | PDF 152.3 KB |
| Cover Letter | Cover Letter(s) | 2009-10-09 | PDF 34.9 KB |
| POA Letter | Cover Letter(s) | 2009-10-09 | PDF 27.8 KB |
| Cover Letter | Cover Letter(s) | 2009-01-13 | PDF 20.2 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2007-02-13 | PDF 30.9 KB |
| PARTS LIST | Parts List/Tune Up Info | 2007-02-13 | PDF 42.4 KB |
Application Information
| Application ID | wVhAP2ybd/4PLVi4XXWSXg== |
|---|---|
| Final Action Date | 2009-10-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0014121735 |
| Model | AIM2FMU |
| Frequency Range | 902.667-927.667 MHz |
| Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter |
| Device Description | AUTOMATED FUEL MANAGEMENT SYSTEM |
| Responsible Party | Joe Hagan, 850-878-2558 |
| Test Firm | Sid Sanders, Timco Engineering, Inc., tei@timcoengr.com  , 352-472-5500 |
| TCB Email | TEI@TIMCOENGR.COM |
| TCB Scope | A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This device must be professionally installed by the Grantee into the Grantee’s products only. Third-party applications cannot be used for integrating this device with different host products and/or antenna(s). The Grantee must ensure that the end-user has no manual instructions to remove or install the device or antenna(s). The antenna(s) used for this transmitter must be fixed-mounted with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. 1/13/2009 CLASS II CHANGE: This Class II Change adds alternate antennas. CLASS II CHANGE: This Class II Change eliminates the need for the attenuator as demonstrated in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| wVhAP2ybd/4PLVi4XXWSXg== | 2009-10-09 | Class II permissive change or modification of presently authorized equipment |
| sz02ThuPVXgnRNQOo7Xc2g== | 2009-01-13 | Class II permissive change or modification of presently authorized equipment |
| JOgUpGSatS/QgYMlWOLEoA== | 2007-02-13 | Original Equipment |
Equipment Authorization
| Frequency | Rules |
|---|---|
| 902.667-927.667 MHz | 15C |
Grants
TCB Grant - Application wVhAP2ybd/4PLVi4XXWSXg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/09/2009 Application Dated: 10/09/2009 |
| Syn Tech Systems Inc |
| 100 Four Points Way |
| PO Box 5258 |
| Tallahassee, FL 32314 |
| Attention: Joe Hagan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NR3AIM2FMU |
| Name of Grantee: | Syn Tech Systems Inc |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | AUTOMATED FUEL MANAGEMENT SYSTEM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.66666 - 927.66666 |
| This device must be professionally installed by the Grantee into the Grantee’s products only. Third-party applications cannot be used for integrating this device with different host products and/or antenna(s). The Grantee must ensure that the end-user has no manual instructions to remove or install the device or antenna(s). The antenna(s) used for this transmitter must be fixed-mounted with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. 1/13/2009 CLASS II CHANGE: This Class II Change adds alternate antennas. CLASS II CHANGE: This Class II Change eliminates the need for the attenuator as demonstrated in this filing.
|
EAS Grant - Application wVhAP2ybd/4PLVi4XXWSXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Syn Tech Systems Inc 100 Four Points Way PO Box 5258 Tallahassee, FL 32314 United States |
Date of Grant: 10/09/2009 Application Dated: 10/09/2009 |
| Attention: Joe Hagan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NR3AIM2FMU |
| Name of Grantee: | Syn Tech Systems Inc |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | AUTOMATED FUEL MANAGEMENT SYSTEM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.66666 - 927.66666 |
| This device must be professionally installed by the Grantee into the Grantee’s products only. Third-party applications cannot be used for integrating this device with different host products and/or antenna(s). The Grantee must ensure that the end-user has no manual instructions to remove or install the device or antenna(s). The antenna(s) used for this transmitter must be fixed-mounted with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. 1/13/2009 CLASS II CHANGE: This Class II Change adds alternate antennas. CLASS II CHANGE: This Class II Change eliminates the need for the attenuator as demonstrated in this filing.
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 01/13/2009 Application Dated: 01/13/2009 |
| Syn Tech Systems Inc |
| 100 Four Points Way |
| PO Box 5258 |
| Tallahassee, FL 32314 |
| Attention: Joe Hagan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NR3AIM2FMU |
| Name of Grantee: | Syn Tech Systems Inc |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | AUTOMATED FUEL MANAGEMENT SYSTEM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.66666 - 927.66666 |
| CLASS II CHANGE: This Class II Change adds alternate antennas. This device must be professionally installed by the Grantee into the Grantee’s products only. Third-party applications cannot be used for integrating this device with different host products and/or antenna(s). The Grantee must ensure that the end-user has no manual instructions to remove or install the device or antenna(s). The antenna(s) used for this transmitter must be fixed-mounted with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. CLASS II CHANGE: This Class II Change adds alternate antennas. |
EAS Grant - Application sz02ThuPVXgnRNQOo7Xc2g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Syn Tech Systems Inc 100 Four Points Way PO Box 5258 Tallahassee, FL 32314 United States |
Date of Grant: 01/13/2009 Application Dated: 01/13/2009 |
| Attention: Joe Hagan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NR3AIM2FMU |
| Name of Grantee: | Syn Tech Systems Inc |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | AUTOMATED FUEL MANAGEMENT SYSTEM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.66666 - 927.66666 |
| CLASS II CHANGE: This Class II Change adds alternate antennas. This device must be professionally installed by the Grantee into the Grantee’s products only. Third-party applications cannot be used for integrating this device with different host products and/or antenna(s). The Grantee must ensure that the end-user has no manual instructions to remove or install the device or antenna(s). The antenna(s) used for this transmitter must be fixed-mounted with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. CLASS II CHANGE: This Class II Change adds alternate antennas. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 02/13/2007 Application Dated: 02/13/2007 |
| Syn Tech Systems Inc |
| 100 Four Points Way |
| PO Box 5258 |
| Tallahassee, FL 32314 |
| Attention: Joe Hagan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NR3AIM2FMU |
| Name of Grantee: | Syn Tech Systems Inc |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | AUTOMATED FUEL MANAGEMENT SYSTEM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.66666 - 927.66666 |
EAS Grant - Application JOgUpGSatS/QgYMlWOLEoA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Syn Tech Systems Inc 100 Four Points Way PO Box 5258 Tallahassee, FL 32314 United States | Date of Grant: 02/13/2007 Application Dated: 02/13/2007 |
| Attention: Joe Hagan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NR3AIM2FMU |
| Name of Grantee: | Syn Tech Systems Inc |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | AUTOMATED FUEL MANAGEMENT SYSTEM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.66666 - 927.66666 |
| Mail To: |
| EA638637 |