FCC ID NS904P11
MHX910A 900MHz SPREAD SPECTRUM OEM MODULE
by Microhard Systems Inc
Grantee Code: NS9 Product Code: 04P11
Latest application date: 2005-05-04
FCC ID Device Details
| FCC ID | NS904P11 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | NS9 |
| Product Code | 04P11 |
| Applicant Business | Microhard Systems Inc 🇨🇦 |
| Related Domains |  microhardcorp.com |
| Equipment Class | MHX910A 900MHz SPREAD SPECTRUM OEM MODULE |
| Test Firm | UltraTech Engineering Labs Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.4-927.6 MHz | Class II permissive change or modification of presently authorized equipment | 2005-05-04 |
| 902.4-927.6 MHz | Original Equipment | 2004-12-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2004-12-03 | PDF 238.8 KB |
| INTERNAL PHOTOS | Internal Photos | 2004-12-03 | PDF 129.7 KB |
| EXTERNAL PHOTOS 1 | External Photos | 2004-12-03 | PDF 162.1 KB |
| EXTERNAL PHOTOS 2 | External Photos | 2004-12-03 | PDF 344.1 KB |
| EXTERNAL PHOTOS 3 | External Photos | 2004-12-03 | PDF 903.6 KB |
| EXTERNAL PHOTOS 4 | External Photos | 2004-12-03 | PDF 2 MB |
| EXTERNAL PHOTOS 5 | External Photos | 2004-12-03 | PDF 733.3 KB |
| EXTERNAL PHOTOS 6 | External Photos | 2004-12-03 | PDF 850.6 KB |
| ID LABEL LOCATION | ID Label/Location Info | 2004-12-03 | PDF 52.3 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2004-12-03 | PDF 1.1 MB |
| TEST REPORT | Test Report | 2005-05-04 | PDF 769.3 KB |
| TEST REPORT | Test Report | 2004-12-03 | PDF 1.1 MB |
| COFIDENTIALITY LETTER | Cover Letter(s) | 2005-05-04 | PDF 113.5 KB |
| COVER LETTER | Cover Letter(s) | 2005-05-04 | PDF 115.2 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2004-12-03 | PDF 104.7 KB |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 70.5 KB | |
| SCHEMATICS Metadata only | Schematics | PDF 122.7 KB | |
| SCHEMATICS Metadata only | Schematics | PDF 122.5 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 55.8 KB | |
| PARTS LIST Metadata only | Parts List/Tune Up Info | PDF 36.6 KB |
Application Information
| Application ID | A1axYhCrGO/501Ra6NVubw== |
|---|---|
| Final Action Date | 2005-05-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007211139 |
| Model | 04P11 |
| Frequency Range | 902.4-927.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | MHX910A 900MHz SPREAD SPECTRUM OEM MODULE |
| Responsible Party | Hany Shenouda, President, Shenouda@microhardcorp.com , 403 248-0028 |
| Test Firm | Tri Luu, UltraTech Engineering Labs Inc., tri@ultratech-labs.com  , 905-829-1570 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Modular Approval. Approval is limited to OEM installation only. The OEM installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The output power is variable from the value listed in this entry to .1% of the value listed. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| A1axYhCrGO/501Ra6NVubw== | 2005-05-04 | Class II permissive change or modification of presently authorized equipment |
| gNjOwsPuz7C6G1KH4hmm1w== | 2004-12-03 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.4-927.6 MHz | 1.0000000 | 15C |
Grants
TCB Grant - Application gNjOwsPuz7C6G1KH4hmm1w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/03/2004 Application Dated: 12/03/2004 |
| Microhard Systems Inc |
| 150 Country Hills Landing NW |
| Calgary, AB, T3K 5P3 Canada |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS904P11 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MHX910 A 900MHz SPREAD SPECTRUM OEM MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 1.0 |
| Power listed is conducted. Modular Approval. Approval is limited to OEM installation only. The OEM installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The output power is variable from the value listed in this entry to .1% of the value listed. |
EAS Grant - Application gNjOwsPuz7C6G1KH4hmm1w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Microhard Systems Inc 150 Country Hills Landing NW Calgary, AB, T3K 5P3 Canada |
Date of Grant: 12/03/2004 Application Dated: 12/03/2004 |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS904P11 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MHX910 A 900MHz SPREAD SPECTRUM OEM MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 1.0 |
| Power listed is conducted. Modular Approval. Approval is limited to OEM installation only. The OEM installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The output power is variable from the value listed in this entry to .1% of the value listed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/04/2005 Application Dated: 05/04/2005 |
| Microhard Systems Inc |
| 150 Country Hills Landing NW |
| Calgary, AB, T3K 5P3 Canada |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS904P11 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MHX910A 900MHz SPREAD SPECTRUM OEM MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 1.0 |
| Power listed is conducted. Modular Approval. Approval is limited to OEM installation only. The OEM installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The output power is variable from the value listed in this entry to .1% of the value listed. |
EAS Grant - Application A1axYhCrGO/501Ra6NVubw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Microhard Systems Inc 150 Country Hills Landing NW Calgary, AB, T3K 5P3 Canada |
Date of Grant: 05/04/2005 Application Dated: 05/04/2005 |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS904P11 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MHX910A 900MHz SPREAD SPECTRUM OEM MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 1.0 |
| Power listed is conducted. Modular Approval. Approval is limited to OEM installation only. The OEM installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The output power is variable from the value listed in this entry to .1% of the value listed. |
| Mail To: |