FCC ID NS907P23
MHX2421-2400MHz OEM FREQUENCY HOPPING/DTS MODULE
by Microhard Systems Inc
Grantee Code: NS9 Product Code: 07P23
Latest application date: 2007-09-07
FCC ID Device Details
| FCC ID | NS907P23 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | NS9 |
| Product Code | 07P23 |
| Applicant Business | Microhard Systems Inc 🇨🇦 |
| Related Domains |  microhardcorp.com |
| Equipment Class | MHX2421-2400MHz OEM FREQUENCY HOPPING/DTS MODULE |
| Test Firm | UltraTech Engineering Labs Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2401.6-2477.6 MHz | Original Equipment | 2007-09-07 |
| 2402.5-2476.5 MHz | Original Equipment | 2007-09-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| ANTENNA LIST | Users Manual | 2007-09-07 | PDF 162.2 KB |
| USERS MANUAL | Users Manual | 2007-09-07 | PDF 228.9 KB |
| INTERNAL PHOTOS | Internal Photos | 2007-09-07 | PDF 21.4 KB |
| INTERNAL SHIELD | Internal Photos | 2007-09-05 | PDF 19.7 KB |
| EXTERNAL PHOTOS | External Photos | 2007-09-07 | PDF 17 KB |
| external antenna | External Photos | 2007-09-07 | PDF 623.2 KB |
| EXTERNAL PHOTOS | External Photos | 2007-09-05 | PDF 623.2 KB |
| ID LABEL LOCATION | ID Label/Location Info | 2007-09-07 | PDF 123.4 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2007-09-07 | PDF 1 MB |
| TEST REPORT | Test Report | 2007-09-07 | PDF 3.1 MB |
| AUTHORIZATION LETTER | Cover Letter(s) | 2007-09-07 | PDF 72.1 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2007-09-07 | PDF 80.2 KB |
| COVER LETTER | Cover Letter(s) | 2007-09-07 | PDF 114.9 KB |
| MODULAR REQUEST LETTER | Cover Letter(s) | 2007-09-07 | PDF 98.2 KB |
Application Information
| Application ID | a/PWjTY8amK3ewsCd3vQFA== |
|---|---|
| Final Action Date | 2007-09-07 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0007211139 |
| Model | 07P23 |
| Frequency Range | 2401.6-2477.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | MHX2421-2400MHz OEM FREQUENCY HOPPING/DTS MODULE |
| Responsible Party | Hany Shenouda, President, Shenouda@microhardcorp.com , 403 248-0028 |
| Test Firm | Tri Luu, UltraTech Engineering Labs Inc., tri@ultratech-labs.com  , 877-747-6381 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power listed is conducted. Approval is limited to OEM installations for mobile and fixed applications only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module is approved for use with the antennas and minimum length of cables as documented in this filing. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The output power is variable from the value listed in this entry to .1% of the value listed. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| a/PWjTY8amK3ewsCd3vQFA== | 2007-09-07 | Original Equipment |
| EUeOyvqzrsPkemB8FUEjvg== | 2007-09-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application EUeOyvqzrsPkemB8FUEjvg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 09/05/2007 Application Dated: 09/03/2007 |
| Microhard Systems Inc |
| 150 Country Hills Landing NW |
| Calgary, AB, T3K 5P3 Canada |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS907P23 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | MHX2421-2400MHz OEM FREQUENCY HOPPING/DTS MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.5 - 2476.5 | 1.0 |
| Modular Approval. Power listed is conducted. Approval is limited to OEM installations for mobile and fixed applications only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module is approved for use with the antennas and minimum length of cables as documented in this filing. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The output power is variable from the value listed in this entry to .1% of the value listed. |
EAS Grant - Application EUeOyvqzrsPkemB8FUEjvg==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Microhard Systems Inc 150 Country Hills Landing NW Calgary, AB, T3K 5P3 Canada | Date of Grant: 09/05/2007 Application Dated: 09/03/2007 |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS907P23 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | MHX2421-2400MHz OEM FREQUENCY HOPPING/DTS MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.5 - 2476.5 | 1.0 |
| Modular Approval. Power listed is conducted. Approval is limited to OEM installations for mobile and fixed applications only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module is approved for use with the antennas and minimum length of cables as documented in this filing. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The output power is variable from the value listed in this entry to .1% of the value listed.
|
| Mail To: |
| EA416571 |
TCB Grant - Application a/PWjTY8amK3ewsCd3vQFA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 09/07/2007 Application Dated: 09/03/2007 |
| Microhard Systems Inc |
| 150 Country Hills Landing NW |
| Calgary, AB, T3K 5P3 Canada |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS907P23 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MHX2421-2400MHz OEM FREQUENCY HOPPING/DTS MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.6 - 2477.6 | 1.0 |
| Modular Approval. Power listed is conducted. Approval is limited to OEM installations for mobile and fixed applications only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module is approved for use with the antennas and minimum length of cables as documented in this filing. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The output power is variable from the value listed in this entry to .1% of the value listed. |
EAS Grant - Application a/PWjTY8amK3ewsCd3vQFA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Microhard Systems Inc 150 Country Hills Landing NW Calgary, AB, T3K 5P3 Canada | Date of Grant: 09/07/2007 Application Dated: 09/03/2007 |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS907P23 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MHX2421-2400MHz OEM FREQUENCY HOPPING/DTS MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.6 - 2477.6 | 1.0 |
| Modular Approval. Power listed is conducted. Approval is limited to OEM installations for mobile and fixed applications only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module is approved for use with the antennas and minimum length of cables as documented in this filing. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The output power is variable from the value listed in this entry to .1% of the value listed.
|
| Mail To: |
| EA468354 |