FCC ID NS908P24
n920 - 900 MHz OEM Frequency Hopping Module
by Microhard Systems Inc
Grantee Code: NS9 Product Code: 08P24
Latest application date: 2013-09-18
FCC ID Device Details
| FCC ID | NS908P24 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | NS9 |
| Product Code | 08P24 |
| Applicant Business | Microhard Systems Inc 🇨🇦 |
| Related Domains |  microhardcorp.com |
| Equipment Class | n920 - 900 MHz OEM Frequency Hopping Module |
| Test Firm | UltraTech Engineering Labs Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.4-927.6 MHz | Class II permissive change or modification of presently authorized equipment | 2013-09-18 |
| 902.4-927.6 MHz | Original Equipment | 2008-04-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2013-09-18 | PDF 67.7 KB |
| Antenna List | RF Exposure Info | 2008-04-18 | PDF 123.1 KB |
| Revised User Manual | Users Manual | 2008-04-18 | PDF 242.4 KB |
| User Manual | Users Manual | 2008-04-18 | PDF 230.4 KB |
| Internal Photos | Internal Photos | 2013-09-18 | PDF 219.5 KB |
| Internal Photos | Internal Photos | 2008-04-18 | PDF 55.5 KB |
| Revised Internal Photos | Internal Photos | 2008-04-18 | PDF 196 KB |
| External Photos | External Photos | 2013-09-18 | PDF 102.9 KB |
| External Photos | External Photos | 2008-04-18 | PDF 40 KB |
| Omni Antenna | External Photos | 2008-04-18 | PDF 344.1 KB |
| Patch Antenna | External Photos | 2008-04-18 | PDF 79.3 KB |
| Quater Wave Antenna | External Photos | 2008-04-18 | PDF 57.2 KB |
| Revised External Photos | External Photos | 2008-04-18 | PDF 100.2 KB |
| Rubber Duck Antenna | External Photos | 2008-04-18 | PDF 850.6 KB |
| Transit Antenna | External Photos | 2008-04-18 | PDF 2 MB |
| Yagi Antenna | External Photos | 2008-04-18 | PDF 733.3 KB |
| Label & Location | ID Label/Location Info | 2013-09-18 | PDF 75.4 KB |
| Label and Location | ID Label/Location Info | 2008-04-18 | PDF 122.6 KB |
| Setup Photos | Test Setup Photos | 2013-09-18 | PDF 495.6 KB |
| Test Setup Photos | Test Setup Photos | 2008-04-18 | PDF 2.2 MB |
| Test Report | Test Report | 2013-09-18 | PDF 432.7 KB |
| Test Report | Test Report | 2008-04-18 | PDF 1.3 MB |
| Part 15B Declaration | Attestation Statements | 2013-09-18 | PDF 22.8 KB |
| Modular Approval Request Letter | Attestation Statements | 2008-04-18 | PDF 97.3 KB |
| Authority Letter | Cover Letter(s) | 2013-09-18 | PDF 22.6 KB |
| C2PC Request Letter | Cover Letter(s) | 2013-09-18 | PDF 23.4 KB |
| Cover Letter | Cover Letter(s) | 2013-09-18 | PDF 112.7 KB |
| Authority Letter | Cover Letter(s) | 2008-04-18 | PDF 71.7 KB |
| Confidentiality Letter | Cover Letter(s) | 2008-04-18 | PDF 78.4 KB |
| Cover Letter | Cover Letter(s) | 2008-04-18 | PDF 48.9 KB |
Application Information
| Application ID | 1u6q4+qsz+2WWclq9LGgKQ== |
|---|---|
| Final Action Date | 2013-09-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007211139 |
| Model | 08P24 |
| Frequency Range | 902.4-927.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | n920 - 900 MHz OEM Frequency Hopping Module |
| Responsible Party | Hany Shenouda, President, Shenouda@microhardcorp.com , 403 248-0028 |
| Agent | Dan Dan Dan, UltraTech Engineering Labs Inc., dan@ultratech-labs.com  , 9058291570 |
| Test Firm | Dharmajit Solanki, UltraTech Engineering Labs Inc., dharmajit@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Class II change to digital section of the Module as detailed in the filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 1u6q4+qsz+2WWclq9LGgKQ== | 2013-09-18 | Class II permissive change or modification of presently authorized equipment |
| loTjqogzzAfvM5oieAiyJg== | 2008-04-18 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application loTjqogzzAfvM5oieAiyJg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 04/18/2008 Application Dated: 04/18/2008 |
| Microhard Systems Inc |
| 150 Country Hills Landing NW |
| Calgary, AB, T3K 5P3 Canada |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS908P24 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | n920 - 900 MHz OEM Frequency Hopping Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.001 | |||
| 15C | 902.4 - 927.6 | 1.0 |
| Modular Approval – power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi – cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. |
| Single Modular |
EAS Grant - Application loTjqogzzAfvM5oieAiyJg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Microhard Systems Inc 150 Country Hills Landing NW Calgary, AB, T3K 5P3 Canada |
Date of Grant: 04/18/2008 Application Dated: 04/18/2008 |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS908P24 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | n920 - 900 MHz OEM Frequency Hopping Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.001 | |||
| 15C | 902.4 - 927.6 | 1.0 |
| Modular Approval – power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi – cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. |
| Single Modular |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 09/18/2013 Application Dated: 09/18/2013 |
| Microhard Systems Inc |
| 150 Country Hills Landing NW |
| Calgary, AB, T3K 5P3 Canada |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS908P24 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | n920 - 900 MHz OEM Frequency Hopping Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BB | 15C | 902.4 - 927.6 | 1.0 |
| Single Modular Approval. Power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Class II change to digital section of the Module as detailed in the filing. |
| BB: | Power output continuously variable from value listed to less than 0.5 watts. |
EAS Grant - Application 1u6q4+qsz+2WWclq9LGgKQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Microhard Systems Inc 150 Country Hills Landing NW Calgary, AB, T3K 5P3 Canada |
Date of Grant: 09/18/2013 Application Dated: 09/18/2013 |
| Attention: Hany Shenouda , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NS908P24 |
| Name of Grantee: | Microhard Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | n920 - 900 MHz OEM Frequency Hopping Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BB | 15C | 902.4 - 927.6 | 1.0 |
| Single Modular Approval. Power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Class II change to digital section of the Module as detailed in the filing. |
| BB: | Power output continuously variable from value listed to less than 0.5 watts. |
| Mail To: |