FCC ID NS908P25

FCC ID	NS908P25
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	NS9
Product Code	08P25
Applicant Business	Microhard Systems Inc 🇨🇦
Related Domains	microhardcorp.com
Equipment Class	n920BT - 900 MHz OEM Frequency Hopping / DTS Module
Test Firm	UltraTech Engineering Labs Inc.

Frequency Range	Application Purpose	Final Action Date
902.4-927.6 MHz	Class II permissive change or modification of presently authorized equipment	2013-10-17
903.75-926.25 MHz	Class II permissive change or modification of presently authorized equipment	2013-10-17
903.75-926.25 MHz	Original Equipment	2008-05-16
902.4-927.6 MHz	Original Equipment	2008-05-16

Document	Type	Available	File
User Manual	Users Manual	2013-10-17	PDF 69.3 KB
Antenna List	RF Exposure Info	2008-05-16	PDF 123.1 KB
User Manual	Users Manual	2008-05-16	PDF 242.1 KB
Internal Photos	Internal Photos	2013-10-17	PDF 192.4 KB
Internal Photos	Internal Photos	2008-05-16	PDF 65.2 KB
External Photos	External Photos	2013-10-17	PDF 102.9 KB
Antenna Photo Omni	External Photos	2008-05-16	PDF 344.1 KB
Antenna Photo Patch	External Photos	2008-05-16	PDF 95.6 KB
Antenna Photo QuaterWave	External Photos	2008-05-16	PDF 57.2 KB
Antenna Photo Rubber Duck	External Photos	2008-05-16	PDF 850.6 KB
Antenna Photo Transit	External Photos	2008-05-16	PDF 2 MB
Antenna Photo Yagi	External Photos	2008-05-16	PDF 733.3 KB
Antenna Photos	External Photos	2008-05-16	PDF 344.1 KB
External Photos	External Photos	2008-05-16	PDF 73.1 KB
Label & Location	ID Label/Location Info	2013-10-17	PDF 75.4 KB
Label and Location	ID Label/Location Info	2008-05-16	PDF 123 KB
Setup Photos	Test Setup Photos	2013-10-17	PDF 482.5 KB
Test Setup Photos	Test Setup Photos	2008-05-16	PDF 2.3 MB
Test Report	Test Report	2013-10-17	PDF 435.8 KB
Test Report	Test Report	2008-05-16	PDF 1.7 MB
Part 15B Declaration	Attestation Statements	2013-10-17	PDF 22.8 KB
Modular Approval Request Letter	Attestation Statements	2008-05-16	PDF 97.5 KB
Authority Letter	Cover Letter(s)	2013-10-17	PDF 22.6 KB
C2PC Request Letter	Cover Letter(s)	2013-10-17	PDF 23.4 KB
Cover Letter	Cover Letter(s)	2013-10-17	PDF 112.9 KB
Authority Letter	Cover Letter(s)	2008-05-16	PDF 71.9 KB
Confidentiality Letter	Cover Letter(s)	2008-05-16	PDF 78.6 KB
Cover Letter	Cover Letter(s)	2008-05-16	PDF 49 KB

Application ID	ppZucUkUk65y7si3OP5vNg==
Final Action Date	2013-10-17
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0007211139
Model	08P25
Frequency Range	902.4-927.6 MHz
Equipment Class	DSS - Part 15 Spread Spectrum Transmitter
Device Description	n920BT - 900 MHz OEM Frequency Hopping / DTS Module
Responsible Party	Hany Shenouda, President, Shenouda@microhardcorp.com , 403 248-0028
Agent	Dan Dan Dan, UltraTech Engineering Labs Inc., dan@ultratech-labs.com , 9058291570
Test Firm	Dharmajit Solanki, UltraTech Engineering Labs Inc., dharmajit@ultratech-labs.com , 905-829-1570
TCB Email	vic@ultratech-labs.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Single Modular Approval. Power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Class II Permissive Changes to digital section of the Module as detailed in the filing.

Application ID	Date	Purpose
ppZucUkUk65y7si3OP5vNg==	2013-10-17	Class II permissive change or modification of presently authorized equipment
E7ykkAfktjKN4vgCn53jdQ==	2013-10-17	Class II permissive change or modification of presently authorized equipment
mDYHw8J13I09AIhzz6rZNw==	2008-05-16	Original Equipment
7i0dKzscqBF5BzfGDeUiiQ==	2008-05-16	Original Equipment

Frequency	Output	Rules	Grant Notes
902.4-927.6 MHz	0.001	15C
902.4-927.6 MHz	1.0000000	15C	BB
902.4-927.6 MHz	1	15C
903.75-926.25 MHz	1	15C	BB
903.75-926.25 MHz	0.001	15C
903.75-926.25 MHz	1	15C
904-926 MHz	1	15C	BB
904-926 MHz	0.001	15C
904-926 MHz	1	15C
905-925 MHz	1	15C	BB
905-925 MHz	0.001	15C
905-925 MHz	1	15C
907-923 MHz	1	15C	BB
907-923 MHz	0.001	15C
907-923 MHz	1	15C

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada

Date of Grant: 10/17/2013

Application Dated: 10/17/2013

Microhard Systems Inc

150 Country Hills Landing NW

Calgary, AB, T3K 5P3
Canada

Attention: Hany Shenouda , President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	NS908P25

Name of Grantee:	Microhard Systems Inc

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	n920BT - 900 MHz OEM Frequency Hopping / DTS Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BB	15C	902.4 - 927.6	1.0

Single Modular Approval. Power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi – cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Class II Permissive Changes to digital section of the Module as detailed in the filing.

BB:	Power output continuously variable from value listed to less than 0.5 watts.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Microhard Systems Inc
150 Country Hills Landing NW
Calgary, AB, T3K 5P3
Canada

Date of Grant: 10/17/2013

Application Dated: 10/17/2013

Attention: Hany Shenouda , President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	NS908P25

Name of Grantee:	Microhard Systems Inc

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	n920BT - 900 MHz OEM Frequency Hopping / DTS Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BB	15C	902.4 - 927.6	1.0

Single Modular Approval. Power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi – cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Class II Permissive Changes to digital section of the Module as detailed in the filing.

BB:	Power output continuously variable from value listed to less than 0.5 watts.

TCB Grant - Application mDYHw8J13I09AIhzz6rZNw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada

Date of Grant: 05/16/2008

Application Dated: 05/15/2008

Microhard Systems Inc

150 Country Hills Landing NW

Calgary, AB, T3K 5P3
Canada

Attention: Hany Shenouda , President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	NS908P25

Name of Grantee:	Microhard Systems Inc

Equipment Class:	Digital Transmission System
Notes:	n920T - 900 MHz OEM Frequency Hopping / DTS Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	903.75 - 926.25	0.001
	15C	903.75 - 926.25	1.0
	15C	904.0 - 926.0	0.001
	15C	904.0 - 926.0	1.0
	15C	905.0 - 925.0	0.001
	15C	905.0 - 925.0	1.0
	15C	907.0 - 923.0	0.001
	15C	907.0 - 923.0	1.0

Modular Approval – power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi – cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Single Modular

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Microhard Systems Inc
150 Country Hills Landing NW
Calgary, AB, T3K 5P3
Canada

Date of Grant: 05/16/2008

Application Dated: 05/15/2008

Attention: Hany Shenouda , President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	NS908P25

Name of Grantee:	Microhard Systems Inc

Equipment Class:	Digital Transmission System
Notes:	n920T - 900 MHz OEM Frequency Hopping / DTS Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	903.75 - 926.25	0.001
	15C	903.75 - 926.25	1.0
	15C	904.0 - 926.0	0.001
	15C	904.0 - 926.0	1.0
	15C	905.0 - 925.0	0.001
	15C	905.0 - 925.0	1.0
	15C	907.0 - 923.0	0.001
	15C	907.0 - 923.0	1.0

Modular Approval – power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi – cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Single Modular

TCB Grant - Application E7ykkAfktjKN4vgCn53jdQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada

Date of Grant: 10/17/2013

Application Dated: 10/17/2013

Microhard Systems Inc

150 Country Hills Landing NW

Calgary, AB, T3K 5P3
Canada

Attention: Hany Shenouda , President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	NS908P25

Name of Grantee:	Microhard Systems Inc

Equipment Class:	Digital Transmission System
Notes:	n920BT - 900 MHz OEM Frequency Hopping / DTS Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BB	15C	903.75 - 926.25	1.0
BB	15C	904.0 - 926.0	1.0
BB	15C	905.0 - 925.0	1.0
BB	15C	907.0 - 923.0	1.0

Single Modular Approval. Power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi – cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Class II Permissive Changes to digital section of the Module as detailed in the filing.

BB:	Power output continuously variable from value listed to less than 0.5 watts.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Microhard Systems Inc
150 Country Hills Landing NW
Calgary, AB, T3K 5P3
Canada

Date of Grant: 10/17/2013

Application Dated: 10/17/2013

Attention: Hany Shenouda , President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	NS908P25

Name of Grantee:	Microhard Systems Inc

Equipment Class:	Digital Transmission System
Notes:	n920BT - 900 MHz OEM Frequency Hopping / DTS Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BB	15C	903.75 - 926.25	1.0
BB	15C	904.0 - 926.0	1.0
BB	15C	905.0 - 925.0	1.0
BB	15C	907.0 - 923.0	1.0

Single Modular Approval. Power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi – cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Class II Permissive Changes to digital section of the Module as detailed in the filing.

BB:	Power output continuously variable from value listed to less than 0.5 watts.

TCB Grant - Application 7i0dKzscqBF5BzfGDeUiiQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada

Date of Grant: 05/16/2008

Application Dated: 05/15/2008

Microhard Systems Inc

150 Country Hills Landing NW

Calgary, AB, T3K 5P3
Canada

Attention: Hany Shenouda , President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	NS908P25

Name of Grantee:	Microhard Systems Inc

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	n920T - 900 MHz OEM Frequency Hopping / DTS Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	902.4 - 927.6	0.001
	15C	902.4 - 927.6	1.0

Modular Approval – power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi – cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Single Modular

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Microhard Systems Inc
150 Country Hills Landing NW
Calgary, AB, T3K 5P3
Canada

Date of Grant: 05/16/2008

Application Dated: 05/15/2008

Attention: Hany Shenouda , President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	NS908P25

Name of Grantee:	Microhard Systems Inc

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	n920T - 900 MHz OEM Frequency Hopping / DTS Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	902.4 - 927.6	0.001
	15C	902.4 - 927.6	1.0

Modular Approval – power output listed is conducted. The conducted power is continuously variable from 0.001 to 1.0 Watt. For operations in mobile RF exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons with the maximum allowable antenna gains of 1.5 dBi (Quarter Wave), 2 dBi (Rubber Ducky), 5.15 dBi (Transit), 8.15 dBi (Omni Directional), 12.5 dBi (Patch) and 14.15 dBi (Yagi). For antennas with the gains greater 6 dBi, the appropriate cable with loss in dB shall be used in order to maintain the EIRP (conducted power in dBm + antenna gain in dBi – cable loss in dB) less than 36 dBm. Antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Single Modular

Mail To:

n920BT - 900 MHz OEM Frequency Hopping / DTS Module

by Microhard Systems Inc

Grantee Code: NS9 Product Code: 08P25

Latest application date: 2013-10-17

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application ppZucUkUk65y7si3OP5vNg==

EAS Grant - Application ppZucUkUk65y7si3OP5vNg==

TCB Grant - Application mDYHw8J13I09AIhzz6rZNw==

EAS Grant - Application mDYHw8J13I09AIhzz6rZNw==

TCB Grant - Application E7ykkAfktjKN4vgCn53jdQ==

EAS Grant - Application E7ykkAfktjKN4vgCn53jdQ==

TCB Grant - Application 7i0dKzscqBF5BzfGDeUiiQ==

EAS Grant - Application 7i0dKzscqBF5BzfGDeUiiQ==