FCC ID NSQTFF-1015S
WhereTag III ST HO
by Zebra Technologies Corporation
Grantee Code: NSQ Product Code: TFF1015S
Latest application date: 2009-05-22
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2441.75 MHz | Class II permissive change or modification of presently authorized equipment | 2009-05-22 |
| 2441.75 MHz | Original Equipment | 2005-09-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2005-09-05 | PDF 145.8 KB |
| Internal Photos | Internal Photos | 2009-05-22 | PDF 118.3 KB |
| External Photos | External Photos | 2009-05-22 | PDF 66.6 KB |
| External Photos | External Photos | 2005-09-05 | PDF 265.4 KB |
| ID Label and Location | ID Label/Location Info | 2005-09-05 | PDF 83.4 KB |
| Test Setup Photos | Test Setup Photos | 2009-05-22 | PDF 353.6 KB |
| Test Setup Photos | Test Setup Photos | 2005-09-05 | PDF 309.9 KB |
| Test Report | Test Report | 2009-05-22 | PDF 962.7 KB |
| Test Report | Test Report | 2005-09-05 | PDF 2.7 MB |
| Class II Permissive Change Request Letter | Cover Letter(s) | 2009-05-22 | PDF 99.8 KB |
| Confidentiality Request | Cover Letter(s) | 2009-05-22 | PDF 139 KB |
| Confidentiality Request | Cover Letter(s) | 2005-09-05 | PDF 18.8 KB |
| RF Exposure Info | RF Exposure Info | 2005-09-05 | PDF 19 KB |
| Internal Photos External Antenna Metadata only | Internal Photos | PDF 722.2 KB | |
| Internal Photos Internal Antenna Metadata only | Internal Photos | PDF 729 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 35.1 KB | |
| Schematics Metadata only | Schematics | PDF 403.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 91 KB | |
| External Antenna Spec Metadata only | Parts List/Tune Up Info | PDF 101.8 KB | |
| Internal Antenna Spec Metadata only | Parts List/Tune Up Info | PDF 88.5 KB |
Application Information
| Application ID | ntHiLXmU0T5/JV3OGTHZ8w== |
|---|---|
| Final Action Date | 2009-05-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008330706 |
| Model | TFF-1015S |
| Frequency Range | 2441.75 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WhereTag III ST HO |
| Responsible Party | Charles A Derrow, Manager, Compliance Engineering, cderrow@zebra.com  , 847-793-5719 |
| Technical Contact | Gus Medina, Zebra Technologies Corp., gmedina@zebra.com , 847-793-5719 |
| Test Firm | Gordon Hurst, Micom Labs, gordon_hurst@micomlabs.com  , 925-462-0304 |
| TCB Email | JpergKusig@eurofins.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. Power output listed is conducted. This device must be professionally installed. Power listed for channel frequency 2446.5 MHz is for on/off keyed - frequency shift keyed (OOK/FSK) modulation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time-averaging duty factor not exceeding 2.55%. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ntHiLXmU0T5/JV3OGTHZ8w== | 2009-05-22 | Class II permissive change or modification of presently authorized equipment |
| LnEB2Ua54MaQm+eE/yDn1Q== | 2005-09-05 | Original Equipment |
Grants
TCB Grant - Application ntHiLXmU0T5/JV3OGTHZ8w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 05/22/2009 Application Dated: 05/22/2009 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernon Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NSQTFF-1015S |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WhereTag III ST HO |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2441.75 - 2441.75 | 0.0302 | |||
| 15C | 2446.5 - 2446.5 | 0.01059 |
| Class II Permissive Change. Power output listed is conducted. This device must be professionally installed. Power listed for channel frequency 2446.5 MHz is for on/off keyed - frequency shift keyed (OOK/FSK) modulation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time-averaging duty factor not exceeding 2.55%. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application ntHiLXmU0T5/JV3OGTHZ8w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernon Hills, IL 60061 United States |
Date of Grant: 05/22/2009 Application Dated: 05/22/2009 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NSQTFF-1015S |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WhereTag III ST HO |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2441.75 - 2441.75 | 0.0302 | |||
| 15C | 2446.5 - 2446.5 | 0.01059 |
| Class II Permissive Change. Power output listed is conducted. This device must be professionally installed. Power listed for channel frequency 2446.5 MHz is for on/off keyed - frequency shift keyed (OOK/FSK) modulation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time-averaging duty factor not exceeding 2.55%. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 09/05/2005 Application Dated: 09/05/2005 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Qianlin Zhou , Advanced Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NSQTFF-1015S |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WhereTag III ST HO |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2441.75 - 2441.75 | 0.0302 | |||
| 15C | 2446.5 - 2446.5 | 0.01059 |
| Power output listed is conducted. This device must be professionally installed. Power listed for channel frequency 2446.5 MHz is for on/off keyed - frequency shift keyed (OOK/FSK) modulation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time-averaging duty factor not exceeding 2.55%. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application LnEB2Ua54MaQm+eE/yDn1Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 09/05/2005 Application Dated: 09/05/2005 |
| Attention: Qianlin Zhou , Advanced Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NSQTFF-1015S |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WhereTag III ST HO |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2441.75 - 2441.75 | 0.0302 | |||
| 15C | 2446.5 - 2446.5 | 0.01059 |
| Power output listed is conducted. This device must be professionally installed. Power listed for channel frequency 2446.5 MHz is for on/off keyed - frequency shift keyed (OOK/FSK) modulation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time-averaging duty factor not exceeding 2.55%. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |