FCC ID NTTSX1115
UNII Radio
by WJ Communications, Inc.
Grantee Code: NTT Product Code: SX1115
Latest application date: 2001-10-24
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5730-5820 MHz | Class II permissive change or modification of presently authorized equipment | 2001-10-24 |
| 5730-5820 MHz | Original Equipment | 1999-12-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Revised antenna installation instruction | Users Manual | 2001-10-24 | PDF 28 KB |
| 14 dBi corne antenna data sheet | Users Manual | 1999-12-20 | PDF 44.1 KB |
| Antennas used during tests (antenna list) | Users Manual | 1999-12-20 | PDF 2.8 KB |
| Antnenna mount detail, RadioWave 4 ft dish | Users Manual | 1999-12-20 | PDF 324.4 KB |
| Copy of email sent to you and Kwok re MPE | Users Manual | 1999-12-20 | PDF 9.5 KB |
| Excerpt from Cisco manual showing antenna mounting | Users Manual | 1999-12-20 | PDF 29.2 KB |
| Hardware manual will be same for UNII but with MPE values shown in WJ test repor | Users Manual | 1999-12-20 | PDF 673 KB |
| Includes multiple antenna location instructions to installer | Users Manual | 1999-12-20 | PDF 10.9 KB |
| Mobil Mark antenna info | Users Manual | 1999-12-20 | PDF 44.1 KB |
| RSI Comsat patch antenna data, page 1 | Users Manual | 1999-12-20 | PDF 99.7 KB |
| RSI patch, page 2 | Users Manual | 1999-12-20 | PDF 167.5 KB |
| RSI patch, page 3 | Users Manual | 1999-12-20 | PDF 187.4 KB |
| RSI patch, page 4 | Users Manual | 1999-12-20 | PDF 193.5 KB |
| Radio Wave antenna info | Users Manual | 1999-12-20 | PDF 267.9 KB |
| RadioWave antena, page 3 | Users Manual | 1999-12-20 | PDF 488.1 KB |
| RadioWave antenna data, page 1 | Users Manual | 1999-12-20 | PDF 278.1 KB |
| RadioWave antenna, page 2 | Users Manual | 1999-12-20 | PDF 511.9 KB |
| Response to 2 Dec request re MPE | Users Manual | 1999-12-20 | PDF 17.6 KB |
| Suhner antenna data | Users Manual | 1999-12-20 | PDF 91.5 KB |
| WJ instruction manual with page 7 to be replaced | Users Manual | 1999-12-20 | PDF 1.1 MB |
| pdf version of MPE info from WJ | Users Manual | 1999-12-20 | PDF 53.6 KB |
| 8 ft antenna picture | Internal Photos | 2001-10-24 | PDF 104.7 KB |
| Case bottom internal | Internal Photos | 1999-12-20 | PDF 112 KB |
| Diplexer area | Internal Photos | 1999-12-20 | PDF 118.4 KB |
| Two halves of TX | Internal Photos | 1999-12-20 | PDF 133.6 KB |
| 8 ft antenna picture | External Photos | 2001-10-24 | PDF 87 KB |
| Case 1 | External Photos | 1999-12-20 | PDF 121.1 KB |
| Case 2 | External Photos | 1999-12-20 | PDF 121.6 KB |
| Case 3 | External Photos | 1999-12-20 | PDF 108.9 KB |
| Case bottom | External Photos | 1999-12-20 | PDF 123.9 KB |
| Case bottom 1 | External Photos | 1999-12-20 | PDF 112 KB |
| Case top | External Photos | 1999-12-20 | PDF 129.9 KB |
| Diplexer case opening | External Photos | 1999-12-20 | PDF 118.4 KB |
| Diplexer detail 1 | External Photos | 1999-12-20 | PDF 114.5 KB |
| Diplexer detail 2 | External Photos | 1999-12-20 | PDF 135.1 KB |
| Picture 26 dB panel | External Photos | 1999-12-20 | PDF 89.6 KB |
| Picture 34 dBi 4ft dish | External Photos | 1999-12-20 | PDF 167.4 KB |
| Picture small dish | External Photos | 1999-12-20 | PDF 50.7 KB |
| Picture small panel | External Photos | 1999-12-20 | PDF 124.6 KB |
| TX connectors | External Photos | 1999-12-20 | PDF 116 KB |
| FCC Label | ID Label/Location Info | 1999-12-20 | PDF 47 KB |
| ID Label location | ID Label/Location Info | 1999-12-20 | PDF 128.2 KB |
| Conducted test setu | Test Setup Photos | 1999-12-20 | PDF 139.1 KB |
| Radiated test setup | Test Setup Photos | 1999-12-20 | PDF 167.2 KB |
| Test Report | Test Report | 2001-10-24 | PDF 1 MB |
| Confirmation of EUT frequency range | Test Report | 1999-12-20 | PDF 3.7 KB |
| Power and PSD data per methods discussed 28 October | Test Report | 1999-12-20 | PDF 199.3 KB |
| Test Report | Test Report | 1999-12-20 | PDF 587.1 KB |
| Class II permissive change letter | Cover Letter(s) | 2001-10-24 | PDF 47.5 KB |
| Agent letter | Cover Letter(s) | 1999-12-20 | PDF 7.4 KB |
| Cover letter re 18 Oct request for info | Cover Letter(s) | 1999-12-20 | PDF 5.8 KB |
| MPE calculation | RF Exposure Info | 2001-10-24 | PDF 23 KB |
| MPE information update | RF Exposure Info | 1999-12-20 | PDF 5.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 120.5 KB | |
| Schematic 1 Pwr Metadata only | Schematics | PDF 178.4 KB | |
| Schematic 2 RF Metadata only | Schematics | PDF 1.4 MB | |
| Theory of Operations Metadata only | Operational Description | PDF 21.1 KB |
Application Information
| Application ID | xx2777Vwi6pE87X0csPA0g== |
|---|---|
| Final Action Date | 2001-10-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013987839 |
| Model | SX1115 |
| Frequency Range | 5730-5820 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | UNII Radio |
| Responsible Party | Tim Buchner, Strategic Marketing, Tim.Buchner@wj.com |
| Test Firm | Daisy Poon, Cisco Systems, Inc., dpoon@cisco.com |
| TCB Email | mikekuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | In this Class II permissive change filing, a 40dBi antenna is added. This device must be professionally installed, and may only be used in point-to-point applications. Antennas used with this device must be installed on permanent structures for outdoor operations in order to qualify for categorical exclusion from rountine MPE evaluation. Appropriate installation instructions, requirements and minimum separation distances, as determined in the filing, must be provided to installers to ensure installations satisfy MPE compliance requirements for fixed transmitter operations. If an antenna is co- located with other antennas at a site, RF exposure requirements for the site must be satisfied with respect to Section 1.1307(b)(3). Separate approval for RF exposure compliance is required for all other non-fixed and indoor operations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xx2777Vwi6pE87X0csPA0g== | 2001-10-24 | Class II permissive change or modification of presently authorized equipment |
| G/Vt3BbQfdMxu63iShog9w== | 1999-12-20 | Original Equipment |
Grants
TCB Grant - Application xx2777Vwi6pE87X0csPA0g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/24/2001 Application Dated: 10/24/2001 |
| WJ Communications, Inc. |
| 401 River Oaks Parkway |
| San Jose, CA 95134 |
| Attention: Tim Buchner , Strategic Marketing |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NTTSX1115 |
| Name of Grantee: | WJ Communications, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | UNII Radio |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15E | 5730.0 - 5820.0 | 0.605 |
| In this Class II permissive change filing, a 40dBi antenna is added. This device must be professionally installed, and may only be used in point-to-point applications. Antennas used with this device must be installed on permanent structures for outdoor operations in order to qualify for categorical exclusion from rountine MPE evaluation. Appropriate installation instructions, requirements and minimum separation distances, as determined in the filing, must be provided to installers to ensure installations satisfy MPE compliance requirements for fixed transmitter operations. If an antenna is co- located with other antennas at a site, RF exposure requirements for the site must be satisfied with respect to Section 1.1307(b)(3). Separate approval for RF exposure compliance is required for all other non-fixed and indoor operations. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application xx2777Vwi6pE87X0csPA0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
WJ Communications, Inc. 401 River Oaks Parkway San Jose, CA 95134 United States |
Date of Grant: 10/24/2001 Application Dated: 10/24/2001 |
| Attention: Tim Buchner , Strategic Marketing |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NTTSX1115 |
| Name of Grantee: | WJ Communications, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | UNII Radio |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15E | 5730.0 - 5820.0 | 0.605 |
| In this Class II permissive change filing, a 40dBi antenna is added. This device must be professionally installed, and may only be used in point-to-point applications. Antennas used with this device must be installed on permanent structures for outdoor operations in order to qualify for categorical exclusion from rountine MPE evaluation. Appropriate installation instructions, requirements and minimum separation distances, as determined in the filing, must be provided to installers to ensure installations satisfy MPE compliance requirements for fixed transmitter operations. If an antenna is co- located with other antennas at a site, RF exposure requirements for the site must be satisfied with respect to Section 1.1307(b)(3). Separate approval for RF exposure compliance is required for all other non-fixed and indoor operations. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
WJ Communications, Inc. 401 River Oaks Parkway San Jose, CA 95134 United States |
Date of Grant: 12/20/1999 Application Dated: 08/10/1999 |
| Attention: Tim Buchner , Strategic Marketing |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NTTSX1115 |
| Name of Grantee: | WJ Communications, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15E | 5730.0 - 5820.0 | 0.605 |
| This device must be professionally installed, and may only be used in point-to-point applications. Antennas used with this device must be installed on permanent structures for outdoor operations in order to qualify for categorical exclusion from routine MPE evaluation. Appropriate installation instructions, requirements and minimum separation distances, as determined in the filing, must be provided to installers to ensure that antenna installations satisfy MPE compliance requirements for fixed transmitter operations. If an antenna is co-located with other antennas at a site, RF exposure requirements for the site must be satisfied with respect to Section 1.1307(b)(3). Separate approval for RF exposure compliance is required for all other non-fixed and indoor operations. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: |
| Thomas Cokenias, Agent for Watkins-Johnson |
| T.N. Cokenias Consulting |
| 1086355 El Granada Blvd |
| El Granada, CA 94018 |