FCC ID NVRPS71090E-PS78
Public Safety Signal Booster
by Westell, Inc.
Grantee Code: NVR Product Code: PS71090EPS78
Latest application date: 2020-04-24
FCC ID Device Details
| FCC ID | NVRPS71090E-PS78 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | NVR |
| Product Code | PS71090EPS78 |
| Applicant Business | Westell, Inc. 🇺🇸 |
| Related Domains |  westell.com |
| Equipment Class | Public Safety Signal Booster |
| Test Firm | Radiometrics Midwest Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 758-768 MHz | Original Equipment | 2020-04-24 |
| 817-824 MHz | Original Equipment | 2020-04-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2020-04-24 | PDF 5 MB |
| Internal Photos | Internal Photos | 2020-04-24 | PDF 5.3 MB |
| External Photos | External Photos | 2020-04-24 | PDF 883.2 KB |
| Label and Label Location | ID Label/Location Info | 2020-04-24 | PDF 286.5 KB |
| Test Setup Photos | Test Setup Photos | 2020-04-24 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2020-04-24 | PDF 1.7 MB |
| Test Report | Test Report | 2020-04-24 | PDF 2.2 MB |
| Test Report | Test Report | 2020-04-24 | PDF 1.7 MB |
| Attestation Letter | Attestation Statements | 2020-04-24 | PDF 274 KB |
| Agent Authorization Letter | Cover Letter(s) | 2020-04-24 | PDF 52.6 KB |
| Confidential Letter | Cover Letter(s) | 2020-04-24 | PDF 108.3 KB |
| RF Exposure | RF Exposure Info | 2020-04-24 | PDF 16.9 KB |
| Tune up Procedure | Parts List/Tune Up Info | 2020-04-24 | PDF 80.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 1,023.4 KB | |
| Schematics Metadata only | Schematics | PDF 1.8 MB | |
| Operational Description Metadata only | Operational Description | PDF 40.2 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 262.2 KB |
Application Information
| Application ID | VaTKrn1/G+mcbOuqYpGETg== |
|---|---|
| Final Action Date | 2020-04-24 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0010374171 |
| Model | PS71090E-PS78 |
| Frequency Range | 758-768 MHz |
| Equipment Class | B9B - Part 90 Class B Industrial Booster (non-SMR) |
| Device Description | Public Safety Signal Booster |
| Responsible Party | Joseph K Gage, Compliance Engineer, jgage@westell.com , 630-375-4724 |
| Test Firm | Joseph Strzelecki, Radiometrics Midwest Corp., joe@radiomet.com  , 8152930772 |
| TCB Email | bacl.regulatory@baclcorp.com  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class B Signal Booster. In-Building DAS Industrial Booster. Power output listed is conducted. This device must be professionally installed. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. The antennas used for this transmitter is to be fixed-mounted on indoor/outdoor permanent structures, and may not have gain exceeding 3.8/3.0 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| VaTKrn1/G+mcbOuqYpGETg== | 2020-04-24 | Original Equipment |
| L1V1dnNfHcyDRytjlmn2LQ== | 2020-04-24 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 758-768 MHz | 2 | Amp | F2D | 9 |
| 758-768 MHz | 2 | Amp | F9W | 9 |
| 758-768 MHz | 2 | Amp | G7D | 9 |
| 758-768 MHz | 2 | Amp | D7W | 9 |
| 769-775 MHz | 2 | Amp | F1E | 9 |
| 769-775 MHz | 2 | Amp | F1D | 9 |
| 769-775 MHz | 2 | Amp | F3E | 9 |
| 769-775 MHz | 2 | Amp | F2D | 9 |
| 788-798 MHz | 2 | Amp | F3E | 9 |
| 788-798 MHz | 2 | Amp | F2D | 9 |
| 788-798 MHz | 2 | Amp | F9W | 9 |
| 788-798 MHz | 2 | Amp | G7D | 9 |
| 788-798 MHz | 2 | Amp | D7W | 9 |
| 788-798 MHz | 2 | Amp | F1E | 9 |
| 788-798 MHz | 2 | Amp | F1D | 9 |
| 799-805 MHz | 2 | Amp | F1E | 9 |
| 799-805 MHz | 2 | Amp | F1D | 9 |
| 799-805 MHz | 2 | Amp | F3E | 9 |
| 799-805 MHz | 2 | Amp | F2D | 9 |
| 806-817 MHz | 2 | Amp | F1E | 9 |
| 806-817 MHz | 2 | Amp | F1D | 9 |
| 806-817 MHz | 2 | Amp | F3E | 9 |
| 806-817 MHz | 2 | Amp | F2D | 9 |
| 806-817 MHz | 2 | Amp | G7W | 9 |
| 817-824 MHz | 2 | Amp | GXW | 90S |
| 817-824 MHz | 2 | Amp | G7W | 90S |
| 817-824 MHz | 2 | Amp | F9W | 90S |
| 851-862 MHz | 2 | Amp | F1E | 9 |
| 851-862 MHz | 2 | Amp | F1D | 9 |
| 851-862 MHz | 2 | Amp | F3E | 9 |
| 851-862 MHz | 2 | Amp | F2D | 9 |
| 851-862 MHz | 2 | Amp | G7W | 9 |
| 862-869 MHz | 2 | Amp | GXW | 90S |
| 862-869 MHz | 2 | Amp | G7W | 90S |
| 862-869 MHz | 2 | Amp | F9W | 90S |
Grants
TCB Grant - Application VaTKrn1/G+mcbOuqYpGETg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 04/24/2020 Application Dated: 04/24/2020 |
| Westell, Inc. |
| 750 North Commons Drive |
| Aurora, IL 60504 |
| Attention: Joseph Gage , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NVRPS71090E-PS78 |
| Name of Grantee: | Westell, Inc. |
| Equipment Class: | Part 90 Class B Industrial Booster (non-SMR) |
| Notes: | Public Safety Signal Booster |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 758.0 - 768.0 | 2.0 | Amp | F1E | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | F1D | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | F3E | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | F2D | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | F9W | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | G7D | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | D7W | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | F1E | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | F1D | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | F3E | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | F2D | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | F9W | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | G7D | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | D7W | |
| 90 | 769.0 - 775.0 | 2.0 | Amp | F1E | |
| 90 | 769.0 - 775.0 | 2.0 | Amp | F1D | |
| 90 | 769.0 - 775.0 | 2.0 | Amp | F3E | |
| 90 | 769.0 - 775.0 | 2.0 | Amp | F2D | |
| 90 | 799.0 - 805.0 | 2.0 | Amp | F1E | |
| 90 | 799.0 - 805.0 | 2.0 | Amp | F1D | |
| 90 | 799.0 - 805.0 | 2.0 | Amp | F3E | |
| 90 | 799.0 - 805.0 | 2.0 | Amp | F2D | |
| 90 | 806.0 - 817.0 | 2.0 | Amp | F1E | |
| 90 | 806.0 - 817.0 | 2.0 | Amp | F1D | |
| 90 | 806.0 - 817.0 | 2.0 | Amp | F3E | |
| 90 | 806.0 - 817.0 | 2.0 | Amp | F2D | |
| 90 | 806.0 - 817.0 | 2.0 | Amp | G7W | |
| 90 | 851.0 - 862.0 | 2.0 | Amp | F1E | |
| 90 | 851.0 - 862.0 | 2.0 | Amp | F1D | |
| 90 | 851.0 - 862.0 | 2.0 | Amp | F3E | |
| 90 | 851.0 - 862.0 | 2.0 | Amp | F2D | |
| 90 | 851.0 - 862.0 | 2.0 | Amp | G7W |
| Class B Signal Booster. In-Building DAS Industrial Booster. Power output listed is conducted. This device must be professionally installed. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. The antennas used for this transmitter is to be fixed-mounted on indoor/outdoor permanent structures, and may not have gain exceeding 3.8/3.0 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application VaTKrn1/G+mcbOuqYpGETg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Westell, Inc. 750 North Commons Drive Aurora, IL 60504 United States |
Date of Grant: 04/24/2020 Application Dated: 04/24/2020 |
| Attention: Joseph Gage , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NVRPS71090E-PS78 |
| Name of Grantee: | Westell, Inc. |
| Equipment Class: | Part 90 Class B Industrial Booster (non-SMR) |
| Notes: | Public Safety Signal Booster |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 758.0 - 768.0 | 2.0 | Amp | F1E | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | F1D | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | F3E | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | F2D | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | F9W | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | G7D | |
| 90 | 758.0 - 768.0 | 2.0 | Amp | D7W | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | F1E | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | F1D | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | F3E | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | F2D | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | F9W | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | G7D | |
| 90 | 788.0 - 798.0 | 2.0 | Amp | D7W | |
| 90 | 769.0 - 775.0 | 2.0 | Amp | F1E | |
| 90 | 769.0 - 775.0 | 2.0 | Amp | F1D | |
| 90 | 769.0 - 775.0 | 2.0 | Amp | F3E | |
| 90 | 769.0 - 775.0 | 2.0 | Amp | F2D | |
| 90 | 799.0 - 805.0 | 2.0 | Amp | F1E | |
| 90 | 799.0 - 805.0 | 2.0 | Amp | F1D | |
| 90 | 799.0 - 805.0 | 2.0 | Amp | F3E | |
| 90 | 799.0 - 805.0 | 2.0 | Amp | F2D | |
| 90 | 806.0 - 817.0 | 2.0 | Amp | F1E | |
| 90 | 806.0 - 817.0 | 2.0 | Amp | F1D | |
| 90 | 806.0 - 817.0 | 2.0 | Amp | F3E | |
| 90 | 806.0 - 817.0 | 2.0 | Amp | F2D | |
| 90 | 806.0 - 817.0 | 2.0 | Amp | G7W | |
| 90 | 851.0 - 862.0 | 2.0 | Amp | F1E | |
| 90 | 851.0 - 862.0 | 2.0 | Amp | F1D | |
| 90 | 851.0 - 862.0 | 2.0 | Amp | F3E | |
| 90 | 851.0 - 862.0 | 2.0 | Amp | F2D | |
| 90 | 851.0 - 862.0 | 2.0 | Amp | G7W |
| Class B Signal Booster. In-Building DAS Industrial Booster. Power output listed is conducted. This device must be professionally installed. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. The antennas used for this transmitter is to be fixed-mounted on indoor/outdoor permanent structures, and may not have gain exceeding 3.8/3.0 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 04/24/2020 Application Dated: 04/24/2020 |
| Westell, Inc. |
| 750 North Commons Drive |
| Aurora, IL 60504 |
| Attention: Joseph Gage , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NVRPS71090E-PS78 |
| Name of Grantee: | Westell, Inc. |
| Equipment Class: | Part 20 Industrial Booster (CMRS) |
| Notes: | Public Safety Signal Booster |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90S | 817.0 - 824.0 | 2.0 | Amp | GXW | |
| 90S | 817.0 - 824.0 | 2.0 | Amp | G7W | |
| 90S | 817.0 - 824.0 | 2.0 | Amp | F9W | |
| 90S | 862.0 - 869.0 | 2.0 | Amp | GXW | |
| 90S | 862.0 - 869.0 | 2.0 | Amp | G7W | |
| 90S | 862.0 - 869.0 | 2.0 | Amp | F9W |
| In-Building DAS Industrial Booster. Power output listed is conducted. This device must be professionally installed. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. The antennas used for this transmitter is to be fixed-mounted on indoor/outdoor permanent structures, and may not have gain exceeding 3.8/3.0 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application L1V1dnNfHcyDRytjlmn2LQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Westell, Inc. 750 North Commons Drive Aurora, IL 60504 United States |
Date of Grant: 04/24/2020 Application Dated: 04/24/2020 |
| Attention: Joseph Gage , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NVRPS71090E-PS78 |
| Name of Grantee: | Westell, Inc. |
| Equipment Class: | Part 20 Industrial Booster (CMRS) |
| Notes: | Public Safety Signal Booster |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90S | 817.0 - 824.0 | 2.0 | Amp | GXW | |
| 90S | 817.0 - 824.0 | 2.0 | Amp | G7W | |
| 90S | 817.0 - 824.0 | 2.0 | Amp | F9W | |
| 90S | 862.0 - 869.0 | 2.0 | Amp | GXW | |
| 90S | 862.0 - 869.0 | 2.0 | Amp | G7W | |
| 90S | 862.0 - 869.0 | 2.0 | Amp | F9W |
| In-Building DAS Industrial Booster. Power output listed is conducted. This device must be professionally installed. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. The antennas used for this transmitter is to be fixed-mounted on indoor/outdoor permanent structures, and may not have gain exceeding 3.8/3.0 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |