FCC ID NXW-RF615R

UHF RFID Reader SIMATIC RF615R

by Siemens AG

Grantee Code: NXW   Product Code: RF615R
Latest application date: 2021-05-12

FCC ID Device Details

FCC IDNXW-RF615R
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNXW
Product CodeRF615R
Applicant BusinessSiemens AG 🇩🇪
Related Domains siemens.com
Equipment ClassUHF RFID Reader SIMATIC RF615R
Test FirmTUV SUD Product Service GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.75-907.25 MHzClass II permissive change or modification of presently authorized equipment2021-05-12
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2020-05-05
902.75-927.25 MHzOriginal Equipment2019-04-19

Exhibits

DocumentTypeAvailableFile
User Manual IUsers Manual2020-05-05PDF 3 MB
User Manual IIUsers Manual2020-05-05PDF 3.6 MB
User Manual Ii Metadata onlyUsers Manual2020-05-05PDF 3.6 MB
User ManualUsers Manual2019-04-19PDF 5.5 MB
Internal PhotosInternal Photos2021-05-12PDF 368.4 KB
Internal PhotosInternal Photos2020-05-05PDF 1.1 MB
Internal PhotosInternal Photos2019-04-19PDF 1.2 MB
External PhotosExternal Photos2020-05-05PDF 508.7 KB
External PhotosExternal Photos2019-04-19PDF 292.2 KB
LabelID Label/Location Info2020-05-05PDF 173.1 KB
Label LocationID Label/Location Info2020-05-05PDF 198.9 KB
Product LabelID Label/Location Info2019-04-19PDF 104 KB
Product Label LocationID Label/Location Info2019-04-19PDF 370.4 KB
Test Setup PhotosTest Setup Photos2021-05-12PDF 1.8 MB
Test Setup PhotosTest Setup Photos2019-04-19PDF 388.6 KB
Test ReportTest Report2021-05-12PDF 936 KB
Test ReportTest Report2020-05-05PDF 1 MB
Test ReportTest Report2019-04-19PDF 3.4 MB
Agent LetterCover Letter(s)2021-05-12PDF 200.2 KB
C2PC LetterCover Letter(s)2021-05-12PDF 260.5 KB
Confidentiality LetterCover Letter(s)2021-05-12PDF 261.3 KB
Agent LetterCover Letter(s)2020-05-05PDF 67.2 KB
C2PC LetterCover Letter(s)2020-05-05PDF 78.1 KB
Confidentiality LetterCover Letter(s)2020-05-05PDF 77.6 KB
Agency LetterCover Letter(s)2019-04-19PDF 79.2 KB
Confidentiality LetterCover Letter(s)2019-04-19PDF 118.4 KB
RF Exposure reportRF Exposure Info2020-05-05PDF 382.8 KB
RF Exposure InfoRF Exposure Info2019-04-19PDF 98.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 477.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 69.7 KB
Schematics Metadata onlySchematicsPDF 455.9 KB
Schematics Metadata onlySchematicsPDF 4.8 MB
Schematics_Antenna Metadata onlySchematicsPDF 99.8 KB
Schematics_Main Board Metadata onlySchematicsPDF 5 MB
Operating Description Metadata onlyOperational DescriptionPDF 667 KB
Operational Description Metadata onlyOperational DescriptionPDF 330.3 KB

Application Information

Application ID0ju4WLu9LChyOFEfwGPVMQ==
Final Action Date2021-05-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0006191076
ModelRF615R
Frequency Range902.75-907.25 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionUHF RFID Reader SIMATIC RF615R
Responsible PartyThomas Erik Schilhabel, Manager, Compliance Engineering, thomas.schilhabel@siemens.com , 00499118953283
Test FirmMarkus Biberger, TUV SUD Product Service GmbH, markus.biberger@tuev-sued.de , 499421552253
TCB Emailandy.zhang@tuvsud.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC as described in this filing. Power output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multitransmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
0ju4WLu9LChyOFEfwGPVMQ==2021-05-12Class II permissive change or modification of presently authorized equipment
iAUrriWcEWaZ7l5YKmCS6w==2020-05-05Class II permissive change or modification of presently authorized equipment
gNJ0PELJOvPZKbuLVkbaYQ==2019-04-19Original Equipment

Equipment Authorization

FrequencyOutputRules
902.75-907.25 MHz0.558500015C
902.75-927.25 MHz0.558500015C

Grants

TCB Grant - Application iAUrriWcEWaZ7l5YKmCS6w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 05/05/2020

Application Dated: 04/21/2020
Siemens AG
Gleiwitzer Str. 555
PD PA CI R&D 1
Nuernberg, 90475
Germany
 
Attention: Thomas Schilhabel , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NXW-RF615R
Name of Grantee:  Siemens AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.5585  

C2PC as described in this filing. Power output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application iAUrriWcEWaZ7l5YKmCS6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Gleiwitzer Str. 555 PD PA CI R&D 1
Nuernberg, 90475
Germany
  Date of Grant: 05/05/2020

Application Dated: 04/21/2020
 
Attention: Thomas Schilhabel , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NXW-RF615R
Name of Grantee:  Siemens AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.5585  

C2PC as described in this filing. Power output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application gNJ0PELJOvPZKbuLVkbaYQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 04/19/2019

Application Dated: 04/18/2019
Siemens AG
Gleiwitzer Str. 555
PD PA CI R&D 1
Nuernberg, 90475
Germany
 
Attention: Thomas Schilhabel , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NXW-RF615R
Name of Grantee:  Siemens AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.5585  

Power output listed is conducted. Only those antenna(s) tested with the device in this filings may be used with this transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application gNJ0PELJOvPZKbuLVkbaYQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Gleiwitzer Str. 555 PD PA CI R&D 1
Nuernberg, 90475
Germany
  Date of Grant: 04/19/2019

Application Dated: 04/18/2019
 
Attention: Thomas Schilhabel , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NXW-RF615R
Name of Grantee:  Siemens AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.5585  

Power output listed is conducted. Only those antenna(s) tested with the device in this filings may be used with this transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 0ju4WLu9LChyOFEfwGPVMQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 05/12/2021

Application Dated: 05/12/2021
Siemens AG
Gleiwitzer Str. 555
PD PA CI R&D 1
Nuernberg, 90475
Germany
 
Attention: Thomas Schilhabel , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NXW-RF615R
Name of Grantee:  Siemens AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UHF RFID Reader SIMATIC RF615R
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  907.25 0.5585  

C2PC as described in this filing. Power output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multitransmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 0ju4WLu9LChyOFEfwGPVMQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Siemens AG
Gleiwitzer Str. 555 PD PA CI R&D 1
Nuernberg, 90475
Germany
  Date of Grant: 05/12/2021

Application Dated: 05/12/2021
 
Attention: Thomas Schilhabel , Manager, Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NXW-RF615R
Name of Grantee:  Siemens AG
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UHF RFID Reader SIMATIC RF615R
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  907.25 0.5585  

C2PC as described in this filing. Power output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multitransmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: