FCC ID NZI-120271

Single Modular Approval. Output Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. This module is approved for use in products operating as fixed or mobile transmitting devices. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter policy. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. For the specific configurations in this filing the internal antenna and external gain, including cable loss, must not exceed 2 dBi at 700 MHz, 5.15 dBi at 850 MHz, 2.15 dBi at 1700 MHz and 1900 MHz and 4.2 dBi at 2600 MHz. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the 2W eirp Part 24 and the 3W eirp Part 27 power limits. This Grant is valid only when the device is sold to integrators and the integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2 and 4; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 5 and 12 and 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 7.

Single Modular Approval. Output Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. This module is approved for use in products operating as fixed or mobile transmitting devices. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter policy. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. For the specific configurations in this filing the internal antenna and external gain, including cable loss, must not exceed 2 dBi at 700 MHz, 5.15 dBi at 850 MHz, 2.15 dBi at 1700 MHz and 1900 MHz and 4.2 dBi at 2600 MHz. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the 2W eirp Part 24 and the 3W eirp Part 27 power limits. This Grant is valid only when the device is sold to integrators and the integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2 and 4; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 5 and 12 and 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 7.