FCC ID NZI-PMACS
Embedded Wireless Module
by TRIMBLE EUROPE BV
Grantee Code: NZI Product Code: PMACS
Latest application date: 2023-03-27
FCC ID Device Details
| FCC ID | NZI-PMACS |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | NZI |
| Product Code | PMACS |
| Applicant Business | TRIMBLE EUROPE BV 🇳🇱 |
| Related Domains |  trimble.se |
| Equipment Class | Embedded Wireless Module |
| Test Firm | Intertek Semko AB |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-03-27 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-PMACS Grant Date: 08/21/2017 | 2022-11-30 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-PMACS Grant Date: 08/21/2017 | 2022-11-30 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-PMACS Grant Date: 08/21/2017 | 2022-11-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-03-27 | PDF 3.7 MB |
| Internal Photos | Internal Photos | 2023-03-27 | PDF 358.9 KB |
| External Photos | External Photos | 2023-03-27 | PDF 37.4 KB |
| External Photos | External Photos | 2022-11-30 | PDF 863.2 KB |
| Label Artwork and Location | ID Label/Location Info | 2023-03-27 | PDF 145.2 KB |
| Label Artwork and Location | ID Label/Location Info | 2022-11-30 | PDF 396.9 KB |
| Test Setup | Test Setup Photos | 2023-03-27 | PDF 140.5 KB |
| Test Report | Test Report | 2023-03-27 | PDF 1.1 MB |
| Attestation | Attestation Statements | 2023-03-27 | PDF 316.7 KB |
| Letter of Agency | Cover Letter(s) | 2023-03-27 | PDF 36.3 KB |
| Permissive change letter | Cover Letter(s) | 2023-03-27 | PDF 242.9 KB |
| Authorisation Letter | Cover Letter(s) | 2022-11-30 | PDF 237.6 KB |
| Request to Change | Cover Letter(s) | 2022-11-30 | PDF 28 KB |
| RF Exposure | RF Exposure Info | 2023-03-27 | PDF 525.9 KB |
Application Information
| Application ID | ttn62cMGJjdt8+hmwdAxRg== |
|---|---|
| Final Action Date | 2023-03-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0025779943 |
| Model | PMACS |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Embedded Wireless Module |
| Responsible Party | Helena Fredenberg, Product Compliance Engineer, helena.fredenberg@trimble.se , +4686221000 |
| Agent | Andreas Andreas Andreas, Intertek Semko AB |
| Technical Contact | Stefan Andersson, Trimble AB, stefan_andersson@trimble.com  , +46738660125 |
| Test Firm | Par Iggstrom, Intertek Semko AB, par.iggstrom@intertek.com  , +46708750026 |
| TCB Email | TCB_Admin@intertek.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to Limited Single Modular Approval. Output power listed is conducted. This module is intended to be installed into the specific host equipment Trimble Total station model/config: SX12-200. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ttn62cMGJjdt8+hmwdAxRg== | 2023-03-27 | Class II permissive change or modification of presently authorized equipment |
| s4pRBA0rcit882c1UPtnDg== | 2022-11-30 | Change in identification of presently authorized equipment. Original FCC ID: N6C-PMACS Grant Date: 08/21/2017 |
| TA3LUKMC3RD+5TsMJIhjpQ== | 2022-11-30 | Change in identification of presently authorized equipment. Original FCC ID: N6C-PMACS Grant Date: 08/21/2017 |
| 54rV6GhM/ybN+rYWPsiUFQ== | 2022-11-30 | Change in identification of presently authorized equipment. Original FCC ID: N6C-PMACS Grant Date: 08/21/2017 |
Equipment Authorization
Grants
TCB Grant - Application ttn62cMGJjdt8+hmwdAxRg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 03/27/2023 Application Dated: 03/27/2023 |
| TRIMBLE EUROPE BV |
| Industrieweg 187a |
| P.O. Box 5683, |
| CC Best, 5683 Netherlands |
| Attention: Helena Fredenberg , Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NZI-PMACS |
| Name of Grantee: | TRIMBLE EUROPE BV |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2 |
| Class II Permissive Change to Limited Single Modular Approval. Output power listed is conducted. This module is intended to be installed into the specific host equipment Trimble Total station model/config: SX12-200. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. |
EAS Grant - Application ttn62cMGJjdt8+hmwdAxRg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TRIMBLE EUROPE BV Industrieweg 187a P.O. Box 5683, CC Best, 5683 Netherlands |
Date of Grant: 03/27/2023 Application Dated: 03/27/2023 |
| Attention: Helena Fredenberg , Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NZI-PMACS |
| Name of Grantee: | TRIMBLE EUROPE BV |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2 |
| Class II Permissive Change to Limited Single Modular Approval. Output power listed is conducted. This module is intended to be installed into the specific host equipment Trimble Total station model/config: SX12-200. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 11/30/2022 Application Dated: 11/30/2022 |
| TRIMBLE EUROPE BV |
| Industrieweg 187a |
| P.O. Box 5683, |
| CC Best, 5683 Netherlands |
| Attention: Helena Fredenberg , Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NZI-PMACS |
| Name of Grantee: | TRIMBLE EUROPE BV |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedded Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.013 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.013 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.013 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.013 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz and 5775 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application TA3LUKMC3RD+5TsMJIhjpQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TRIMBLE EUROPE BV Industrieweg 187a P.O. Box 5683, CC Best, 5683 Netherlands |
Date of Grant: 11/30/2022 Application Dated: 11/30/2022 |
| Attention: Helena Fredenberg , Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NZI-PMACS |
| Name of Grantee: | TRIMBLE EUROPE BV |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedded Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.013 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.013 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.013 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.013 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz and 5775 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 11/30/2022 Application Dated: 11/30/2022 |
| TRIMBLE EUROPE BV |
| Industrieweg 187a |
| P.O. Box 5683, |
| CC Best, 5683 Netherlands |
| Attention: Helena Fredenberg , Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NZI-PMACS |
| Name of Grantee: | TRIMBLE EUROPE BV |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application s4pRBA0rcit882c1UPtnDg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TRIMBLE EUROPE BV Industrieweg 187a P.O. Box 5683, CC Best, 5683 Netherlands |
Date of Grant: 11/30/2022 Application Dated: 11/30/2022 |
| Attention: Helena Fredenberg , Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NZI-PMACS |
| Name of Grantee: | TRIMBLE EUROPE BV |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 11/30/2022 Application Dated: 11/30/2022 |
| TRIMBLE EUROPE BV |
| Industrieweg 187a |
| P.O. Box 5683, |
| CC Best, 5683 Netherlands |
| Attention: Helena Fredenberg , Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NZI-PMACS |
| Name of Grantee: | TRIMBLE EUROPE BV |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Embedded Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 54rV6GhM/ybN+rYWPsiUFQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TRIMBLE EUROPE BV Industrieweg 187a P.O. Box 5683, CC Best, 5683 Netherlands |
Date of Grant: 11/30/2022 Application Dated: 11/30/2022 |
| Attention: Helena Fredenberg , Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NZI-PMACS |
| Name of Grantee: | TRIMBLE EUROPE BV |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Embedded Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |