FCC ID O2Z-AZ210
SMARTPHONE
by Intel Corporation
Grantee Code: O2Z Product Code: AZ210
Latest application date: 2012-09-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-09-17 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-09-17 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2012-09-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-09-17 |
| 2402-2480 MHz | Original Equipment | 2012-09-07 |
| 5180-5240 MHz | Original Equipment | 2012-09-07 |
| 824.2-848.8 MHz | Original Equipment | 2012-09-07 |
| 2412-2462 MHz | Original Equipment | 2012-09-07 |
| 13.56 MHz | Original Equipment | 2012-09-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2013-03-05 | PDF 2.2 MB |
| INTERNAL PHOTOS | Internal Photos | 2013-03-13 | PDF 2.8 MB |
| Internal Photos | Internal Photos | 2013-03-05 | PDF 900.5 KB |
| Internal Photos Antenna Location | Internal Photos | 2013-03-05 | PDF 121.2 KB |
| ExternalPhotos | External Photos | 2013-03-05 | PDF 558.2 KB |
| Label Location | ID Label/Location Info | 2012-09-07 | PDF 66 KB |
| Label Sample | ID Label/Location Info | 2012-09-07 | PDF 111 KB |
| RF EXPOSURE PHOTOS | Test Setup Photos | 2013-03-13 | PDF 634.7 KB |
| TEST SETUP | Test Setup Photos | 2013-03-13 | PDF 109.9 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2013-03-13 | PDF 153.8 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2013-03-13 | PDF 153.6 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2013-03-13 | PDF 169.9 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2013-03-13 | PDF 155.7 KB |
| RF Exposure Photo | Test Setup Photos | 2013-03-05 | PDF 627.7 KB |
| RF Exposure Photos | Test Setup Photos | 2013-03-05 | PDF 627.7 KB |
| Test Setup Photos | Test Setup Photos | 2013-03-05 | PDF 296.3 KB |
| Test Setup Photos | Test Setup Photos | 2013-03-05 | PDF 528.5 KB |
| Test Setup Photos | Test Setup Photos | 2013-03-05 | PDF 296.3 KB |
| Test Setup Photos | Test Setup Photos | 2013-03-05 | PDF 307.1 KB |
| Test Setup Photos | Test Setup Photos | 2013-03-05 | PDF 549.2 KB |
| Test Setup Photos | Test Setup Photos | 2013-03-05 | PDF 382.1 KB |
| TEST REPORT | Test Report | 2012-09-17 | PDF 473.8 KB |
| TEST REPORT | Test Report | 2012-09-17 | PDF 558.5 KB |
| TEST REPORT | Test Report | 2012-09-17 | PDF 565.7 KB |
| TEST REPORT | Test Report | 2012-09-17 | PDF 481.2 KB |
| TEST REPORT | Test Report | 2012-09-17 | PDF 1.3 MB |
| Test Report | Test Report | 2012-09-07 | PDF 1.3 MB |
| Test Report | Test Report | 2012-09-07 | PDF 1.9 MB |
| Test Report | Test Report | 2012-09-07 | PDF 1 MB |
| Test Report | Test Report | 2012-09-07 | PDF 1.2 MB |
| Test Report | Test Report | 2012-09-07 | PDF 2.7 MB |
| Test Report | Test Report | 2012-09-07 | PDF 2 MB |
| C2PC LETTER | Cover Letter(s) | 2012-09-17 | PDF 24.8 KB |
| Confidential Letter | Cover Letter(s) | 2012-09-17 | PDF 18 KB |
| POA | Cover Letter(s) | 2012-09-17 | PDF 18 KB |
| ST CONFIDENTIAL LETTER | Cover Letter(s) | 2012-09-17 | PDF 18.2 KB |
| Confidential Letter | Cover Letter(s) | 2012-09-07 | PDF 20.3 KB |
| Short Term Confidential Letter | Cover Letter(s) | 2012-09-07 | PDF 17.5 KB |
| RF EXPOSURE | RF Exposure Info | 2012-09-17 | PDF 1.3 MB |
| RF EXPOSURE APPENDIX A | RF Exposure Info | 2012-09-17 | PDF 340.6 KB |
| RF EXPOSURE APPENDIX B | RF Exposure Info | 2012-09-17 | PDF 1.7 MB |
| RF EXPOSURE APPENDIX C1 | RF Exposure Info | 2012-09-17 | PDF 3.4 MB |
| RF EXPOSURE APPENDIX C2 | RF Exposure Info | 2012-09-17 | PDF 4.8 MB |
| RF Exposure | RF Exposure Info | 2012-09-07 | PDF 1.3 MB |
| RF Exposure Appendix A | RF Exposure Info | 2012-09-07 | PDF 501.9 KB |
| RF Exposure Appendix B | RF Exposure Info | 2012-09-07 | PDF 3.4 MB |
| RF Exposure Appendix C1 | RF Exposure Info | 2012-09-07 | PDF 4.2 MB |
| RF Exposure Appendix C2 | RF Exposure Info | 2012-09-07 | PDF 2.4 MB |
| RF Exposure Appendix C3 | RF Exposure Info | 2012-09-07 | PDF 4 MB |
Application Information
| Application ID | oVVw5UidyxU/Upgj/OQwZQ== |
|---|---|
| Final Action Date | 2012-09-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007775034 |
| Model | -AZ210 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | SMARTPHONE |
| Responsible Party | Christine Ryan, Sr. Certification Engineer, christine.m.ryan@intel.com |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw |
| TCB Email | TEI@TIMCOENGR.COM |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/13/2013 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Operations in the band 5.15-5.25 GHz are restricted to indoor use only. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset at a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.31W/kg, 0.34W/kg, 1.55W/kg, and 1.55W/kg, respectively. Class II permissive change. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| oVVw5UidyxU/Upgj/OQwZQ== | 2012-09-17 | Class II permissive change or modification of presently authorized equipment |
| d2j5YJ6z4333BRYBk40GDA== | 2012-09-17 | Class II permissive change or modification of presently authorized equipment |
| V5H2v02WJ+bh+m40N/ZO6g== | 2012-09-17 | Class II permissive change or modification of presently authorized equipment |
| 3e2hoS7Xf+T7b4sowpHODg== | 2012-09-17 | Class II permissive change or modification of presently authorized equipment |
| 1srA2DeovovYZL5YlbNGNw== | 2012-09-17 | Class II permissive change or modification of presently authorized equipment |
| tBhfyl02fwb87zoiX7UJzA== | 2012-09-07 | Original Equipment |
| mezXZbHXyf7sKkI9007ftg== | 2012-09-07 | Original Equipment |
| SAhZEtQXZNdokLeNqY93FA== | 2012-09-07 | Original Equipment |
| R5qF5ncMf1ASxg4bUJEiIw== | 2012-09-07 | Original Equipment |
| IeBA3bw3z6GQuwS+1D4Enw== | 2012-09-07 | Original Equipment |
| H9V+XiVuIbPvXpvx9+Y4HA== | 2012-09-07 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 15B | CC | ||||
| 13.56 MHz | 15C | CC | |||
| 824.2-848.8 MHz | 0.5483 | 0.02ppm | 246KGXW | 22H | |
| 824.2-848.8 MHz | 0.1291 | 0.02ppm | 250KG7W | 22H | |
| 826.4-846.6 MHz | 0.0735 | 0.02ppm | 4M06F9W | 22H | |
| 1850.2-1909.8 MHz | 0.9484 | 0.02ppm | 250KGXW | 24E | |
| 1850.2-1909.8 MHz | 0.2958 | 0.02ppm | 256KG7W | 24E | |
| 1852.4-1907.6 MHz | 0.2312 | 0.01ppm | 4M10F9W | 24E | |
| 2402-2480 MHz | 0.0071000 | 15C | CC | ||
| 2412-2462 MHz | 0.2636000 | 15C | CC | ||
| 5180-5240 MHz | 0.0100000 | 15E | CC |
Grants
TCB Grant - Application V5H2v02WJ+bh+m40N/ZO6g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/17/2012 Application Dated: 09/14/2012 |
| Intel Corporation |
| 2200 Mission College Blvd. |
| SC1-20 |
| Santa Clara, CA 95052-8119 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | SMARTPHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Class II Permissive Change |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application V5H2v02WJ+bh+m40N/ZO6g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 09/17/2012 Application Dated: 09/14/2012 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | SMARTPHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Class II Permissive Change |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Intel Corporation |
| 2200 Mission College Blvd. |
| SC1-20 |
| Santa Clara, CA 95052-8119 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SMARTPHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0071 |
| Power listed is conducted.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application tBhfyl02fwb87zoiX7UJzA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SMARTPHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0071 |
| Power listed is conducted.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Intel Corporation |
| 2200 Mission College Blvd. |
| SC1-20 |
| Santa Clara, CA 95052-8119 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | SMARTPHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.5483 | 0.02 PM | 246KGXW | |
| 22H | 824.2 - 848.8 | 0.1291 | 0.02 PM | 250KG7W | |
| 24E | 1850.2 - 1909.8 | 0.9484 | 0.02 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.2958 | 0.02 PM | 256KG7W | |
| 22H | 826.4 - 846.6 | 0.0735 | 0.02 PM | 4M06F9W | |
| 24E | 1852.4 - 1907.6 | 0.2312 | 0.01 PM | 4M10F9W |
| Power listed is EIRP for part 24 and ERP for part 22. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.89W/kg, 1.28W/kg, 1.55W/kg, and 1.55W/kg respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
EAS Grant - Application SAhZEtQXZNdokLeNqY93FA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | SMARTPHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.5483 | 0.02 PM | 246KGXW | |
| 22H | 824.2 - 848.8 | 0.1291 | 0.02 PM | 250KG7W | |
| 24E | 1850.2 - 1909.8 | 0.9484 | 0.02 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.2958 | 0.02 PM | 256KG7W | |
| 22H | 826.4 - 846.6 | 0.0735 | 0.02 PM | 4M06F9W | |
| 24E | 1852.4 - 1907.6 | 0.2312 | 0.01 PM | 4M10F9W |
| Power listed is EIRP for part 24 and ERP for part 22. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.89W/kg, 1.28W/kg, 1.55W/kg, and 1.55W/kg respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Intel Corporation |
| 2200 Mission College Blvd. |
| SC1-20 |
| Santa Clara, CA 95052-8119 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | SMARTPHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application R5qF5ncMf1ASxg4bUJEiIw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | SMARTPHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/17/2012 Application Dated: 09/14/2012 |
| Intel Corporation |
| 2200 Mission College Blvd. |
| SC1-20 |
| Santa Clara, CA 95052-8119 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SMARTPHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.01 |
| Power listed is conducted. Operations in the band 5.15-5.25 GHz are restricted to indoor use only. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset at a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.31W/kg, 0.34W/kg, 1.55W/kg, and 1.55W/kg, respectively. Class II permissive change. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application oVVw5UidyxU/Upgj/OQwZQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 09/17/2012 Application Dated: 09/14/2012 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SMARTPHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.01 |
| Power listed is conducted. Operations in the band 5.15-5.25 GHz are restricted to indoor use only. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset at a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.31W/kg, 0.34W/kg, 1.55W/kg, and 1.55W/kg, respectively. Class II permissive change. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Intel Corporation |
| 2200 Mission College Blvd. |
| SC1-20 |
| Santa Clara, CA 95052-8119 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SMARTPHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.01 |
| Power listed is conducted. Operations in the band 5.15-5.25 GHz are restricted to indoor use only. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset at a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.1W/kg, 0.13W/kg, 1.55W/kg, and 1.55W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application mezXZbHXyf7sKkI9007ftg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SMARTPHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.01 |
| Power listed is conducted. Operations in the band 5.15-5.25 GHz are restricted to indoor use only. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset at a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.1W/kg, 0.13W/kg, 1.55W/kg, and 1.55W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Intel Corporation |
| 2200 Mission College Blvd. |
| SC1-20 |
| Santa Clara, CA 95052-8119 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | SMARTPHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2636 |
| Power listed is conducted. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.31W/kg, 0.27W/kg, 1.55W/kg, and 1.55W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application IeBA3bw3z6GQuwS+1D4Enw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | SMARTPHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2636 |
| Power listed is conducted. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.31W/kg, 0.27W/kg, 1.55W/kg, and 1.55W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Intel Corporation |
| 2200 Mission College Blvd. |
| SC1-20 |
| Santa Clara, CA 95052-8119 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | SMARTPHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application H9V+XiVuIbPvXpvx9+Y4HA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 09/07/2012 Application Dated: 09/06/2012 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | SMARTPHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/17/2012 Application Dated: 09/14/2012 |
| Intel Corporation |
| 2200 Mission College Blvd. |
| SC1-20 |
| Santa Clara, CA 95052-8119 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | SMARTPHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2636 |
| Power listed is conducted. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.37W/kg, 0.27W/kg, 1.55W/kg, and 1.55W/kg, respectively. Class II permissive change. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application d2j5YJ6z4333BRYBk40GDA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 09/17/2012 Application Dated: 09/14/2012 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | SMARTPHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2636 |
| Power listed is conducted. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.37W/kg, 0.27W/kg, 1.55W/kg, and 1.55W/kg, respectively. Class II permissive change. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/17/2012 Application Dated: 09/14/2012 |
| Intel Corporation |
| 2200 Mission College Blvd. |
| SC1-20 |
| Santa Clara, CA 95052-8119 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | SMARTPHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.5483 | 0.02 PM | 246KGXW | |
| 22H | 824.2 - 848.8 | 0.1291 | 0.02 PM | 250KG7W | |
| 24E | 1850.2 - 1909.8 | 0.9484 | 0.02 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.2958 | 0.02 PM | 256KG7W | |
| 22H | 826.4 - 846.6 | 0.0735 | 0.02 PM | 4M06F9W | |
| 24E | 1852.4 - 1907.6 | 0.2312 | 0.01 PM | 4M10F9W |
| Power listed is EIRP for part 24 and ERP for part 22. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.89W/kg, 1.28W/kg, 1.55W/kg, and 1.55W/kg respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. Class II permissive change.
|
EAS Grant - Application 3e2hoS7Xf+T7b4sowpHODg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 09/17/2012 Application Dated: 09/14/2012 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | SMARTPHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.5483 | 0.02 PM | 246KGXW | |
| 22H | 824.2 - 848.8 | 0.1291 | 0.02 PM | 250KG7W | |
| 24E | 1850.2 - 1909.8 | 0.9484 | 0.02 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.2958 | 0.02 PM | 256KG7W | |
| 22H | 826.4 - 846.6 | 0.0735 | 0.02 PM | 4M06F9W | |
| 24E | 1852.4 - 1907.6 | 0.2312 | 0.01 PM | 4M10F9W |
| Power listed is EIRP for part 24 and ERP for part 22. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.89W/kg, 1.28W/kg, 1.55W/kg, and 1.55W/kg respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. Class II permissive change.
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/17/2012 Application Dated: 09/14/2012 |
| Intel Corporation |
| 2200 Mission College Blvd. |
| SC1-20 |
| Santa Clara, CA 95052-8119 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SMARTPHONE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0071 |
| Power listed is conducted. Class II Permissive Change |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1srA2DeovovYZL5YlbNGNw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 09/17/2012 Application Dated: 09/14/2012 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-AZ210 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SMARTPHONE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0071 |
| Power listed is conducted. Class II Permissive Change |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |