FCC ID O2Z-BT1
Ambler Bluetooth Module
by Intel Corporation
Grantee Code: O2Z Product Code: BT1
Latest application date: 2001-02-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2001-02-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Response to Item 1 | Users Manual | 2001-02-20 | PDF 12.1 KB |
| Revised Internal Photo | Internal Photos | 2001-02-20 | PDF 52.6 KB |
| Antenna Photos | External Photos | 2001-02-20 | PDF 1.7 MB |
| External Photos | External Photos | 2001-02-20 | PDF 60.1 KB |
| Response to Item 1 | External Photos | 2001-02-20 | PDF 65.8 KB |
| FCC ID Label | ID Label/Location Info | 2001-02-20 | PDF 57.2 KB |
| Description of Frequency Hopping System | Operational Description | 2001-02-20 | PDF 478.4 KB |
| Response to Items 5 and 6 EX QQ | Operational Description | 2001-02-20 | PDF 63.2 KB |
| Test Setup Photos | Test Setup Photos | 2001-02-20 | PDF 1.2 MB |
| AC Powerline Conducted Emissions Data | Test Report | 2001-02-20 | PDF 60.2 KB |
| CW Output Power vs DC Input Test Data | Test Report | 2001-02-20 | PDF 67.8 KB |
| DSS Band Edge Test Data | Test Report | 2001-02-20 | PDF 40.7 KB |
| DSS Conducted Spurious Emissions Test Data | Test Report | 2001-02-20 | PDF 299.5 KB |
| DSS Occupied Bandwidth Test Data | Test Report | 2001-02-20 | PDF 76 KB |
| DSS Output Power Test Data | Test Report | 2001-02-20 | PDF 73.1 KB |
| DSS Power Spectral Density | Test Report | 2001-02-20 | PDF 69 KB |
| FHSS 20dB Bandwidth | Test Report | 2001-02-20 | PDF 167.5 KB |
| FHSS Adj Channel Spacing Data | Test Report | 2001-02-20 | PDF 32.3 KB |
| FHSS Band Edges Test Data | Test Report | 2001-02-20 | PDF 57.5 KB |
| FHSS Conducted Spurious Emissions Test Data | Test Report | 2001-02-20 | PDF 320.3 KB |
| FHSS Dwell Time Test Data | Test Report | 2001-02-20 | PDF 71.6 KB |
| FHSS Number of Hopping Frequencies Test Data | Test Report | 2001-02-20 | PDF 87.7 KB |
| FHSS Output Power Test Data | Test Report | 2001-02-20 | PDF 82 KB |
| Response to Item 1 EX HH Process gain report. | Test Report | 2001-02-20 | PDF 44.8 KB |
| Response to Item 2 EX II | Test Report | 2001-02-20 | PDF 1.2 MB |
| Response to Item 2 EX JJ | Test Report | 2001-02-20 | PDF 710.3 KB |
| Response to Item 2 EX KK | Test Report | 2001-02-20 | PDF 707.2 KB |
| Response to Item 2 EX LL | Test Report | 2001-02-20 | PDF 709.6 KB |
| Response to Item 4 EX NN | Test Report | 2001-02-20 | PDF 57.5 KB |
| Response to Item 4 (NW EMC tests) | Test Report | 2001-02-20 | PDF 427.2 KB |
| Response to Items 5 and 6 EX RR | Test Report | 2001-02-20 | PDF 385.4 KB |
| Spurious Radiated Emissions Test Data | Test Report | 2001-02-20 | PDF 21.2 KB |
| Technical Report | Test Report | 2001-02-20 | PDF 175.8 KB |
| Agent Authorization Letter | Cover Letter(s) | 2001-02-20 | PDF 18.8 KB |
| Cover Letter | Cover Letter(s) | 2001-02-20 | PDF 14.3 KB |
| Cover letter from applicant | Cover Letter(s) | 2001-02-20 | PDF 10.5 KB |
| Index of Exhibits | Cover Letter(s) | 2001-02-20 | PDF 11.1 KB |
| Request for Confidentiality Letter | Cover Letter(s) | 2001-02-20 | PDF 14.4 KB |
| Response to Item 1 (Confidential letter revised 11/22/00) | Cover Letter(s) | 2001-02-20 | PDF 37.3 KB |
| Response to Item 3 modular approval justification | Cover Letter(s) | 2001-02-20 | PDF 24.3 KB |
| Revised Index of Exhibits | Cover Letter(s) | 2001-02-20 | PDF 23.5 KB |
| User Guide Metadata only | Users Manual | PDF 19.1 KB | |
| Frequency Block Diagram Metadata only | Block Diagram | PDF 50.8 KB | |
| Schematics Metadata only | Schematics | PDF 136.2 KB | |
| Antenna Connection Method Metadata only | Operational Description | PDF 11 KB | |
| Antenna Information Metadata only | Operational Description | PDF 863.1 KB | |
| Processing Gain Report Metadata only | Operational Description | PDF 257.8 KB | |
| Response to Item 1 EX GG (revised PG) Metadata only | Operational Description | PDF 89.6 KB | |
| Response to Item 4 EX uu antenna connection method Metadata only | Operational Description | PDF 9.3 KB | |
| Response to Item 4 sum of e-mail confidential ex pp Metadata only | Operational Description | PDF 123 KB | |
| Response to Items 5 and 6 (data, confidential) ex SS Metadata only | Operational Description | PDF 132 KB |
Application Information
| Application ID | CbVqUhoOY0hhgeL2xkOZaw== |
|---|---|
| Final Action Date | 2001-02-20 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0007775034 |
| Model | BT1 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Ambler Bluetooth Module |
| Responsible Party | Christine Ryan, Sr. Certification Engineer, christine.m.ryan@intel.com  , 408-300-2167 |
| Agent | Greg Greg Greg, Northwest EMC, Inc., gkiemel@nwemc.com  , (503) 844-4066 |
| Technical Contact | Greg V Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com , (503) 844-4066 |
| Non-Technical Contact | Vicki L Albertson, Northwest EMC, Inc., valbertson@nwemc.com , (503) 844-4066 |
| Test Firm | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com , 503-844-4066 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This application was originally granted on 11/22/2000. This modular transmitter is approved for use in personal computers and may operate in conjunction with other mobile and portable transmitters in the same computer; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee's instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| CbVqUhoOY0hhgeL2xkOZaw== | 2001-02-20 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0023300 | 15C |
Grants
TCB Grant - Application CbVqUhoOY0hhgeL2xkOZaw==
This application does not exist.
EAS Grant - Application CbVqUhoOY0hhgeL2xkOZaw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intel Corporation 2200 Mission College Blvd. SC1-20 Santa Clara, CA 95052-8119 United States |
Date of Grant: 02/20/2001 Application Dated: 06/06/2000 |
| Attention: Christine Ryan , Sr. Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O2Z-BT1 |
| Name of Grantee: | Intel Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Ambler Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00233 |
| This application was originally granted on 11/22/2000. This modular transmitter is approved for use in personal computers and may operate in conjunction with other mobile and portable transmitters in the same computer; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee's instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. |
| Mail To: |