FCC ID O2Z-BT2

O2ZBT2, O2Z BT2, O2Z-BT2, 02Z-BT2

Intel Corporation Intel Personal Wireless Module BT2

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: O2Z-BT2 is O2Z. The remaining characters of the FCC ID, -BT2, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Intel Personal Wireless Module

Application: Intel Personal Wireless Module
Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Short Link: fcc.id/O2Z-BT2
Sources: FCC.gov | FCC.report
Registered By: Intel Corporation - O2Z (United States)

App #	Purpose	Date	Unique ID
1	Original Equipment	2001-06-08	iuGxIdcGmfbFTuGSoSXRgA==

Operating Frequencies

Frequency Range	Power Output	Rule Parts	Line Entry
2.402-2.48 GHz	2.4 mW	15C	1

Exhibits

Document	Type	Submitted Available
Request for Confidentiality	Cover Letter(s) Adobe Acrobat PDF (78 kB)	2001-03-12 2001-06-08
Processing Gain	Test Report Adobe Acrobat PDF (168 kB)	2001-03-12 2001-06-08
Radiated Spurious Emissions	Test Report Adobe Acrobat PDF (31 kB)	2001-03-12 2001-06-08
AC Powerline Conducted Emissions	Test Report Adobe Acrobat PDF (29 kB)	2001-03-12 2001-06-08
Output Power vs DC Input	Test Report Adobe Acrobat PDF (51 kB)	2001-03-12 2001-06-08
DSSS Power Spectral Density	Test Report Adobe Acrobat PDF (226 kB)	2001-03-12 2001-06-08
Test Setup Photos	Test Setup Photos Adobe Acrobat PDF (1810 kB)	2001-03-12 2001-06-08
DSSS Occupied Bandwidth	Test Report Adobe Acrobat PDF (197 kB)	2001-03-12 2001-06-08
Output Power	Test Report Adobe Acrobat PDF (135 kB)	2001-03-12 2001-06-08
Number of Hopping Frequencies	Test Report Adobe Acrobat PDF (131 kB)	2001-03-12 2001-06-08
Conducted Spurious Emissions	Test Report Adobe Acrobat PDF (442 kB)	2001-03-12 2001-06-08
Dwell Time	Test Report Adobe Acrobat PDF (493 kB)	2001-03-12 2001-06-08
Band Edge Compliance	Test Report Adobe Acrobat PDF (77 kB)	2001-03-12 2001-06-08
Channel Spacing	Test Report Adobe Acrobat PDF (46 kB)	2001-03-12 2001-06-08
FHSS Occupied Bandwidth Test Data	Test Report Adobe Acrobat PDF (113 kB)	2001-03-12 2001-06-08
Supplemental Emissions Test Report	Test Report Adobe Acrobat PDF (48 kB)	2001-03-12 2001-06-08
Description of Frequency Hopping System	Operational Description Adobe Acrobat PDF (495 kB)	2001-03-12 2001-06-08
Modular Approval Requirement	Cover Letter(s) Adobe Acrobat PDF (18 kB)	2001-03-12 2001-06-08
Technical Report	Test Report Adobe Acrobat PDF (98 kB)	2001-03-12 2001-06-08
Users Manual	Users Manual Adobe Acrobat PDF (110 kB)	2001-03-12 2001-06-08
Index of Exhibits	Cover Letter(s) Adobe Acrobat PDF (149 kB)	2001-03-12 2001-06-08
Internal Photos	Internal Photos Adobe Acrobat PDF (298 kB)	2001-03-12 2001-06-08
External Photos	External Photos Adobe Acrobat PDF (507 kB)	2001-03-12 2001-06-08
FCC ID Label	ID Label/Location Info Adobe Acrobat PDF (133 kB)	2001-03-12 2001-06-08
Cover Letter from Agent	Cover Letter(s) Adobe Acrobat PDF (76 kB)	2001-03-12 2001-06-08
Agent Authorization Letter	Cover Letter(s) Adobe Acrobat PDF (19 kB)	2001-03-12 2001-06-08
Antenna Information	Operational Description Adobe Acrobat PDF (703 kB)	2001-03-12
Schematics	Schematics Adobe Acrobat PDF (61 kB)	2001-03-12
Antenna Connection Method	Operational Description Adobe Acrobat PDF (9 kB)	2001-03-12
Frequency Block Diagram	Block Diagram Adobe Acrobat PDF (26 kB)	2001-03-12

App #	Document	Date
1	Incoming Correspondence generated [Jun 6 2001]	2001-12-19 07:30:30
1	RT Email Correspondence generated [Apr 23 2001]	2001-12-19 10:15:35
1	Grant Setaside Letter generated [Apr 9 2001]	2001-12-19 10:44:59

App #

Document

Date

Incoming Correspondence generated [Jun 6 2001]

2001-12-19 07:30:30

RT Email Correspondence generated [Apr 23 2001]

2001-12-19 10:15:35

Grant Setaside Letter generated [Apr 9 2001]

2001-12-19 10:44:59

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Intel Corporation
FCC Registration Number (FRN):	0007775034
Alphanumeric FCC ID:	O2ZBT2
Unique Application Identifier:	iuGxIdcGmfbFTuGSoSXRgA==
Line one:	2200 Mission College Blvd.
Line two:	SC1-20
City:	Santa Clara
State:	California
Country:	United States
Zip Code:	95052-8119

TCB Information

TCB Application Email Address:	gkiemel@nwemc.com
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	O2Z
Product Code:	-BT2

Person at the applicant's address to receive grant or for contact

Name:	Christine Ryan
Title:	Sr. Certification Engineer

Telephone Number:

408-300-2167

Extension:

Fax Number:	408-765-4500
Email:	christine.m.ryan@intel.com
Mail Stop:	SC1-20

Technical Contact

Firm Name:	Northwest EMC, Inc.
First Name:	Greg
Middle Name:	V
Last Name:	Kiemel
Line 1:	22975 NW Evergreen Parkway
Line 2:	Suite 400
City:	Hillsboro
State:	Oregon
Country:	United States
Zip Code:	97124

Telephone Number:

503-844-4066

Extension:

Fax Number:	503-844-3826
E-Mail:	gkiemel@nwemc.com

Non Technical Contact

Firm Name:	Northwest EMC, Inc.
First Name:	Vicki
Middle Name:	L
Last Name:	Albertson
Line 1:	22975 NW Evergreen Parkway
Line 2:	Suite 400
City:	Hillsboro
State:	Oregon
Country:	United States
Zip Code:	97124

Telephone Number:

503-844-4066

Extension:

Fax Number:	503-844-3826
E-Mail:	valbertson@nwemc.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	Intel Personal Wireless Module

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: Northwest EMC, Inc.

First Name: Greg

Last Name: Kiemel

Telephone Number:

503-844-4066

Extension:

Fax Number: 503-844-3826

E-mail: gkiemel@nwemc.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
This modular transmitter is approved for use in personal computers and may operate in conjunction with other mobile and portable transmitters in the same computer; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee's instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Gregory V. Kiemel

Title of authorized signature: Director of Engineering

Complete items below if agent signs the application:

Firm Name: Northwest EMC, Inc.

Name: Greg Greg Greg

Line 1: Greg

Line 2: Greg

P.O. Box: Greg

City: Greg

State: Greg

Country: Greg

Zip Code: Greg

Telephone Number:

503-844-4066

Fax Number: 503-844-3826

E-mail: gkiemel@nwemc.com

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Northwest EMC, Inc.
22975 NW Evergreen Parkway, Suite 400
Hillsboro, OR 97124

Date of Grant: 06/08/2001

Application Dated: 03/12/2001

Intel Corporation

2200 Mission College Blvd.

SC1-20

Santa Clara, CA 95052-8119

Attention: Christine Ryan , Sr. Certification Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	O2Z-BT2

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Personal Wireless Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.0024

Reissued by FCC

This modular transmitter is approved for use in personal computers and may operate in conjunction with other mobile and portable transmitters in the same computer; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules. The grantee also must provide OEM integrators, or end users if marketed directly to end users, with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee's instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intel Corporation
2200 Mission College Blvd. SC1-20
Santa Clara, CA 95052-8119
United States

Date of Grant: 06/08/2001

Application Dated: 03/12/2001

Attention: Christine Ryan , Sr. Certification Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	O2Z-BT2

Name of Grantee:	Intel Corporation

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Intel Personal Wireless Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.0024

Reissued by FCC

Mail To:

EA100301

FCC ID O2Z-BT2

O2ZBT2, O2Z BT2, O2Z-BT2, 02Z-BT2

Intel Corporation Intel Personal Wireless Module BT2

Purchase on Amazon: Intel Personal Wireless Module

Operating Frequencies

Exhibits

Correspondence

Application Forms

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details