FCC ID O57AX210NGW

Intel WiFi 6E AX210 Module

by Lenovo (Shanghai) Electronics Technology Co., Ltd

Grantee Code: O57   Product Code: AX210NGW
Latest application date: 2021-09-16

FCC ID Device Details

FCC IDO57AX210NGW
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeO57
Product CodeAX210NGW
Applicant BusinessLenovo (Shanghai) Electronics Technology Co., Ltd 🇨🇳
Related Domains lenovo.com baluntek.com
Equipment ClassIntel WiFi 6E AX210 Module
Test FirmShenzhen Morlab Communications Technology Co. Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-09-16
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2021-09-16
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-09-16
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-09-16
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/20202021-08-20
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/20202021-08-20
5955-7115 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 02/18/20212021-08-19
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/20202021-08-19

Exhibits

DocumentTypeAvailableFile
Regulatory Notice for Wireless LAN modules_Consumer NB (10)_part1Users Manual2022-03-15PDF 4.7 MB
Regulatory Notice for Wireless LAN modules_Consumer NB (10)_part2Users Manual2022-03-15PDF 5.9 MB
Regulatory Notice for Wireless LAN modules_Consumer NB (10)_part3Users Manual2022-03-15PDF 2.6 MB
Users ManualUsers Manual2022-03-15PDF 2.2 MB
Intel WiFi Adapter Information GuideUsers Manual2022-02-16PDF 2.3 MB
Internal PhotosInternal Photos2022-03-15PDF 496.3 KB
int photoInternal Photos2022-02-16PDF 106.3 KB
External PhotosExternal Photos2022-03-15PDF 523.6 KB
EUT photoExternal Photos2022-02-16PDF 83.8 KB
ID Label/Location InfoID Label/Location Info2021-09-16PDF 84.4 KB
label locationID Label/Location Info2021-08-20PDF 28.2 KB
FCC RF Exposure Annex B Test Setup PhotosTest Setup Photos2022-03-15PDF 146 KB
FCC SAR Annex Annex B Test Setup PhotosTest Setup Photos2022-03-15PDF 113.9 KB
Test Setup Photos_6XDTest Setup Photos2022-03-15PDF 316.9 KB
Test Setup Photos_NIITest Setup Photos2022-03-15PDF 316.9 KB
Test Setup Photos_SARTest Setup Photos2022-03-15PDF 100.7 KB
FCC SAR test report_AX210NGW Metadata onlyTest Report2021-09-16PDF 3.7 MB
FCC SAR test report_AX210NGWRF Exposure Info2021-09-16PDF 3.7 MB
C2PC cover letter_FCCCover Letter(s)2021-09-16PDF 135.9 KB
Confidentiality Request LetterCover Letter(s)2021-09-16PDF 107.8 KB
POACover Letter(s)2021-09-16PDF 154 KB
FCC AUTH LTR CHANGE OF ID O57AX210NGWCover Letter(s)2021-08-20PDF 90.1 KB
FCC ID Change Request Letter rev3Cover Letter(s)2021-08-20PDF 14.4 KB
FCC_Authorization LetterCover Letter(s)2021-08-20PDF 219.3 KB
FCC_Confidentiality Request Letter rev3Cover Letter(s)2021-08-20PDF 109.1 KB
CALIBRATION REPORTRF Exposure Info2021-09-16PDF 1.6 MB
FCC RF Exposure Annex CRF Exposure Info2021-09-16PDF 176.1 KB
FCC RF Exposure Annex DRF Exposure Info2021-09-16PDF 148.4 KB
FCC RF Exposure Annex E1-1RF Exposure Info2021-09-16PDF 4.2 MB
FCC RF Exposure Annex E1-2RF Exposure Info2021-09-16PDF 3.3 MB
FCC RF Exposure Annex E1-3RF Exposure Info2021-09-16PDF 3.4 MB
FCC RF Exposure Annex E2RF Exposure Info2021-09-16PDF 3.1 MB
FCC RF Exposure Annex E3RF Exposure Info2021-09-16PDF 1.5 MB
FCC RF Exposure Annex FRF Exposure Info2021-09-16PDF 162.5 KB
FCC SAR Annex Annex CRF Exposure Info2021-09-16PDF 128.5 KB
FCC SAR Annex Annex DRF Exposure Info2021-09-16PDF 148.1 KB
FCC SAR Annex Annex E1RF Exposure Info2021-09-16PDF 4.3 MB
FCC SAR Annex Annex E2RF Exposure Info2021-09-16PDF 5.6 MB
FCC SAR Annex Annex E3RF Exposure Info2021-09-16PDF 5.8 MB
FCC SAR Annex Annex E4RF Exposure Info2021-09-16PDF 4.3 MB
FCC SAR Annex Annex FRF Exposure Info2021-09-16PDF 121.4 KB
SZ21070092S01_Lenovo_AX210NGW_FCC RF ExposureRF Exposure Info2021-09-16PDF 1.9 MB
SZ21070244S01_Lenovo_AX210NGW_FCC SARRF Exposure Info2021-09-16PDF 1.5 MB
Antenna Report_AMP Metadata onlyOperational DescriptionPDF 2 MB
Antenna Report_AWAN Metadata onlyOperational DescriptionPDF 1.6 MB
Confidential_Software Security Operational Description Metadata onlySDR Software/Security InfPDF 2.2 MB
Tune-Up Procedure Metadata onlyParts List/Tune Up InfoPDF 302.6 KB

Application Information

Application IDePsClZFxCh2F7E9xhU5Sjg==
Final Action Date2021-09-16
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0021773460
ModelAX210NGW
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIntel WiFi 6E AX210 Module
Responsible PartySpring Zhou, Product Certification Engineer, zhoucb1@lenovo.com , +86-18116118237
AgentWu Wu Wu, Shenzhen BALUN Technology Co., Ltd., xuewen.wu@baluntek.com , 86-755-66833404
Technical Contactxuewen wu, Shenzhen BALUN Technology Co., Ltd, xuewen.wu@baluntek.com , 86-755-66833404
Non-Technical ContactTiffany Zhang, Shenzhen BALUN Technology Co., Ltd, yanfei.zhang@baluntek.com , 86-755-66850100-8100
Test FirmMr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn , +86 755 36698566
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/15/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC: The module is installed into a host (portable category configuration: notebook computer, Brand: Lenovo, Model Name: IdeaPad Slim 7 Carbon 14ACN6). The highest reported Body and Simultaneous SAR values are 0.68 W/kg and 1.31 W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

Applications

Application IDDatePurpose
ePsClZFxCh2F7E9xhU5Sjg==2021-09-16Class II permissive change or modification of presently authorized equipment
VFZgUI5nXZT/LSirZgE5EQ==2021-09-16Class II permissive change or modification of presently authorized equipment
NfpHWhVGJuybcXCIkW/L9w==2021-09-16Class II permissive change or modification of presently authorized equipment
2Z7tpjdjWT3ns1ZHl1gJ9Q==2021-09-16Class II permissive change or modification of presently authorized equipment
aCoMHtigqgA9B/AXJQFq0Q==2021-08-20Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/2020
Z1Nb2CuQ1b6K3JIR7C5ScQ==2021-08-20Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/2020
WmbPkWxHmy2LbFoBxgvtsw==2021-08-20Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/2020
YwVASWRIyEs/pTKMI9qvSg==2021-08-19Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 02/18/2021
Unes8l3lIHt15vomP1KqjA==2021-08-19Change in identification of presently authorized equipment. Original FCC ID: PD9AX210NG Grant Date: 10/19/2020

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.014000015CCC
2402-2480 MHz0.0115CCC
2412-2472 MHz0.79215CCC, MO
2422-2462 MHz0.60215CCC, MO
5190-5230 MHz0.19915E38, CC, MO
5210 MHz0.08915E38, CC, MO
5250 MHz0.06115E38, CC, MO
5260-5320 MHz0.16515E38, CC, MO, ND
5270-5310 MHz0.15315E38, CC, MO, ND
5290 MHz0.08415E38, CC, MO, ND
5500-5700 MHz0.24515E38, CC, MO, ND
5530-5690 MHz0.22815E38, CC, MO, ND
5710 MHz0.24915E38, CC, MO, ND
5720 MHz0.13415E38, CC, MO, ND
5745-5825 MHz0.26215E38, CC, MO
5755-5795 MHz0.2715E38, CC, MO
5775 MHz0.19515E38, CC, MO
5955-7115 MHz0.01215ECC, EP, MO
5965-7085 MHz0.02415ECC, EP, MO
5985-7025 MHz0.04915ECC, EP, MO
6025-6985 MHz0.09415ECC, EP, MO

Grants

TCB Grant - Application Z1Nb2CuQ1b6K3JIR7C5ScQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 08/20/2021

Application Dated: 08/18/2021
Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road,
China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.792  
CC MO 15C 2422.0  -  2462.0 0.602  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Z1Nb2CuQ1b6K3JIR7C5ScQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road, China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
  Date of Grant: 08/20/2021

Application Dated: 08/18/2021
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.792  
CC MO 15C 2422.0  -  2462.0 0.602  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application YwVASWRIyEs/pTKMI9qvSg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/19/2021

Application Dated: 08/18/2021
Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road,
China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.012  
CC EP MO 15E 5965.0  -  7085.0 0.024  
CC EP MO 15E 5985.0  -  7025.0 0.049  
CC EP MO 15E 6025.0  -  6985.0 0.094  

Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively.

This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application YwVASWRIyEs/pTKMI9qvSg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road, China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
  Date of Grant: 08/19/2021

Application Dated: 08/18/2021
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.012  
CC EP MO 15E 5965.0  -  7085.0 0.024  
CC EP MO 15E 5985.0  -  7025.0 0.049  
CC EP MO 15E 6025.0  -  6985.0 0.094  

Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively.

This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application WmbPkWxHmy2LbFoBxgvtsw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 08/20/2021

Application Dated: 08/18/2021
Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road,
China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application WmbPkWxHmy2LbFoBxgvtsw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road, China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
  Date of Grant: 08/20/2021

Application Dated: 08/18/2021
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



TCB Grant - Application VFZgUI5nXZT/LSirZgE5EQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/16/2021

Application Dated: 09/15/2021
Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road,
China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.012  
CC EP MO 15E 5965.0  -  7085.0 0.024  
CC EP MO 15E 5985.0  -  7025.0 0.049  
CC EP MO 15E 6025.0  -  6985.0 0.094  

C2PC: The module is installed into a host (portable category configuration: notebook computer, Brand: Lenovo, Model Name: IdeaPad Slim 7 Carbon 14ACN6). Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.33 W/kg respectively.

Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively.

This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application VFZgUI5nXZT/LSirZgE5EQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road, China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
  Date of Grant: 09/16/2021

Application Dated: 09/15/2021
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.012  
CC EP MO 15E 5965.0  -  7085.0 0.024  
CC EP MO 15E 5985.0  -  7025.0 0.049  
CC EP MO 15E 6025.0  -  6985.0 0.094  

C2PC: The module is installed into a host (portable category configuration: notebook computer, Brand: Lenovo, Model Name: IdeaPad Slim 7 Carbon 14ACN6). Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.33 W/kg respectively.

Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively.

This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Unes8l3lIHt15vomP1KqjA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/19/2021

Application Dated: 08/18/2021
Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road,
China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Unes8l3lIHt15vomP1KqjA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road, China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
  Date of Grant: 08/19/2021

Application Dated: 08/18/2021
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application NfpHWhVGJuybcXCIkW/L9w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/16/2021

Application Dated: 09/15/2021
Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road,
China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.792  
CC MO 15C 2422.0  -  2462.0 0.602  

C2PC: The module is installed into a host (portable category configuration: notebook computer, Brand: Lenovo, Model Name: IdeaPad Slim 7 Carbon 14ACN6). The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.00 W/kg respectively.

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application NfpHWhVGJuybcXCIkW/L9w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road, China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
  Date of Grant: 09/16/2021

Application Dated: 09/15/2021
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.792  
CC MO 15C 2422.0  -  2462.0 0.602  

C2PC: The module is installed into a host (portable category configuration: notebook computer, Brand: Lenovo, Model Name: IdeaPad Slim 7 Carbon 14ACN6). The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.00 W/kg respectively.

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ePsClZFxCh2F7E9xhU5Sjg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/16/2021

Application Dated: 09/15/2021
Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road,
China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.166  
38 CC MO 15E 5190.0  -  5230.0 0.199  
38 CC MO 15E 5210.0  -  5210.0 0.089  
38 CC MO 15E 5250.0  -  5250.0 0.061  
38 CC MO ND 15E 5260.0  -  5320.0 0.165  
38 CC MO ND 15E 5270.0  -  5310.0 0.153  
38 CC MO ND 15E 5290.0  -  5290.0 0.084  
38 CC MO ND 15E 5500.0  -  5700.0 0.245  
38 CC MO ND 15E 5710.0  -  5710.0 0.249  
38 CC MO ND 15E 5720.0  -  5720.0 0.134  
38 CC MO ND 15E 5530.0  -  5690.0 0.228  
38 CC MO 15E 5745.0  -  5825.0 0.262  
38 CC MO 15E 5755.0  -  5795.0 0.27  
38 CC MO 15E 5775.0  -  5775.0 0.195  

C2PC: The module is installed into a host (portable category configuration: notebook computer, Brand: Lenovo, Model Name: IdeaPad Slim 7 Carbon 14ACN6). The highest reported Body and Simultaneous SAR values are 0.68 W/kg and 1.31 W/kg respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ePsClZFxCh2F7E9xhU5Sjg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road, China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
  Date of Grant: 09/16/2021

Application Dated: 09/15/2021
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.166  
38 CC MO 15E 5190.0  -  5230.0 0.199  
38 CC MO 15E 5210.0  -  5210.0 0.089  
38 CC MO 15E 5250.0  -  5250.0 0.061  
38 CC MO ND 15E 5260.0  -  5320.0 0.165  
38 CC MO ND 15E 5270.0  -  5310.0 0.153  
38 CC MO ND 15E 5290.0  -  5290.0 0.084  
38 CC MO ND 15E 5500.0  -  5700.0 0.245  
38 CC MO ND 15E 5710.0  -  5710.0 0.249  
38 CC MO ND 15E 5720.0  -  5720.0 0.134  
38 CC MO ND 15E 5530.0  -  5690.0 0.228  
38 CC MO 15E 5745.0  -  5825.0 0.262  
38 CC MO 15E 5755.0  -  5795.0 0.27  
38 CC MO 15E 5775.0  -  5775.0 0.195  

C2PC: The module is installed into a host (portable category configuration: notebook computer, Brand: Lenovo, Model Name: IdeaPad Slim 7 Carbon 14ACN6). The highest reported Body and Simultaneous SAR values are 0.68 W/kg and 1.31 W/kg respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application aCoMHtigqgA9B/AXJQFq0Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 08/20/2021

Application Dated: 08/18/2021
Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road,
China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.166  
38 CC MO 15E 5190.0  -  5230.0 0.199  
38 CC MO 15E 5210.0  -  5210.0 0.089  
38 CC MO 15E 5250.0  -  5250.0 0.061  
38 CC MO ND 15E 5260.0  -  5320.0 0.165  
38 CC MO ND 15E 5270.0  -  5310.0 0.153  
38 CC MO ND 15E 5290.0  -  5290.0 0.084  
38 CC MO ND 15E 5500.0  -  5700.0 0.245  
38 CC MO ND 15E 5710.0  -  5710.0 0.249  
38 CC MO ND 15E 5720.0  -  5720.0 0.134  
38 CC MO ND 15E 5530.0  -  5690.0 0.228  
38 CC MO 15E 5745.0  -  5825.0 0.262  
38 CC MO 15E 5755.0  -  5795.0 0.27  
38 CC MO 15E 5775.0  -  5775.0 0.195  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application aCoMHtigqgA9B/AXJQFq0Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road, China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
  Date of Grant: 08/20/2021

Application Dated: 08/18/2021
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.166  
38 CC MO 15E 5190.0  -  5230.0 0.199  
38 CC MO 15E 5210.0  -  5210.0 0.089  
38 CC MO 15E 5250.0  -  5250.0 0.061  
38 CC MO ND 15E 5260.0  -  5320.0 0.165  
38 CC MO ND 15E 5270.0  -  5310.0 0.153  
38 CC MO ND 15E 5290.0  -  5290.0 0.084  
38 CC MO ND 15E 5500.0  -  5700.0 0.245  
38 CC MO ND 15E 5710.0  -  5710.0 0.249  
38 CC MO ND 15E 5720.0  -  5720.0 0.134  
38 CC MO ND 15E 5530.0  -  5690.0 0.228  
38 CC MO 15E 5745.0  -  5825.0 0.262  
38 CC MO 15E 5755.0  -  5795.0 0.27  
38 CC MO 15E 5775.0  -  5775.0 0.195  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 2Z7tpjdjWT3ns1ZHl1gJ9Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/16/2021

Application Dated: 09/15/2021
Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road,
China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

C2PC: The module is installed into a host (portable category configuration: notebook computer, Brand: Lenovo; Model Name: IdeaPad Slim 7 Carbon 14ACN6). The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 1.33 W/kg respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 2Z7tpjdjWT3ns1ZHl1gJ9Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lenovo (Shanghai) Electronics Technology Co., Ltd
Section 304-305, Building No.4, #222, Meiyue Road, China (Shanghai) Pilot Free Trade Zone
Shanghai, 200131
China
  Date of Grant: 09/16/2021

Application Dated: 09/15/2021
 
Attention: Spring Zhou , Product Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O57AX210NGW
Name of Grantee:  Lenovo (Shanghai) Electronics Technology Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel WiFi 6E AX210 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

C2PC: The module is installed into a host (portable category configuration: notebook computer, Brand: Lenovo; Model Name: IdeaPad Slim 7 Carbon 14ACN6). The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 1.33 W/kg respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: