FCC ID O6L-MDD24R2001

2.4GHz DIGITAL AV module

by Tranwo Technology Corp

Grantee Code: O6L   Product Code: MDD24R2001
Latest application date: 2011-06-24

FCC ID Device Details

FCC IDO6L-MDD24R2001
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeO6L
Product CodeMDD24R2001
Applicant BusinessTranwo Technology Corp 🇹🇼
Related Domains tranwo.com.tw
Equipment Class2.4GHz DIGITAL AV module
Test FirmQuietek Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2403-2475 MHzOriginal Equipment2011-06-24

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2011-06-24PDF 256.3 KB
Internal PhotosInternal Photos2011-06-24PDF 421.6 KB
External PhotosExternal Photos2011-06-24PDF 276 KB
Label LocationID Label/Location Info2011-06-24PDF 63.2 KB
Test Setup PhotosTest Setup Photos2011-06-24PDF 505.4 KB
Test ReportTest Report2011-06-24PDF 1.2 MB
Authorization LetterCover Letter(s)2011-06-24PDF 28.5 KB
Confidential LetterCover Letter(s)2011-06-24PDF 29.2 KB
Modular Approval LetterCover Letter(s)2011-06-24PDF 611.5 KB
RF ExposureRF Exposure Info2011-06-24PDF 39.4 KB

Application Information

Application IDcwK59J/ltB//zRoS9gAsEA==
Final Action Date2011-06-24
Application PurposeOriginal Equipment
Applicant FRN0006657605
Model-MDD24R2001
Frequency Range2403-2475 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device Description2.4GHz DIGITAL AV module
Responsible PartyEric Lin, Deputy Quality Assurance Manager, eric_lin@tranwo.com.tw , 886-3-5535626
Test FirmVincent Lin, Quietek Corporation, Vincent@quietek.com , 886-2-8601-3788
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThis is a Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only in devices that provide a stable power supply according to the requirements of DA 00-1407. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instruction to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Applications

Application IDDatePurpose
cwK59J/ltB//zRoS9gAsEA==2011-06-24Original Equipment

Equipment Authorization

FrequencyOutputRules
2403-2475 MHz0.079000015C

Grants

TCB Grant - Application cwK59J/ltB//zRoS9gAsEA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 06/24/2011

Application Dated: 06/24/2011
Tranwo Technology Corp
No.236, Sec. 3, Huanbei Rd.,
Jubei City, Hsinchu County ,, 30265
Taiwan
 
Attention: Eric Lin , Deputy Quality Assurance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O6L-MDD24R2001
Name of Grantee:  Tranwo Technology Corp
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2.4GHz DIGITAL AV module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2403.0  -  2475.0 0.079  

This is a Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only in devices that provide a stable power supply according to the requirements of DA 00-1407. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instruction to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

EAS Grant - Application cwK59J/ltB//zRoS9gAsEA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Tranwo Technology Corp
No.236, Sec. 3, Huanbei Rd.,
Jubei City, Hsinchu County ,, 30265
Taiwan
  Date of Grant: 06/24/2011

Application Dated: 06/24/2011
 
Attention: Eric Lin , Deputy Quality Assurance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O6L-MDD24R2001
Name of Grantee:  Tranwo Technology Corp
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2.4GHz DIGITAL AV module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2403.0  -  2475.0 0.079  

This is a Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only in devices that provide a stable power supply according to the requirements of DA 00-1407. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instruction to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.



Mail To: