FCC ID O6M-WM6001

54M WLAN Module

by BroMax Communications Inc

Grantee Code: O6M   Product Code: WM6001
Latest application date: 2003-03-26

FCC ID Device Details

FCC IDO6M-WM6001
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeO6M
Product CodeWM6001
Applicant BusinessBroMax Communications Inc 🇹🇼
Related Domains kingmax.com.tw
Equipment Class54M WLAN Module
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2003-03-26

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2003-03-26PDF 442.6 KB
Int PhotoInternal Photos2003-03-26PDF 870.4 KB
Ext PhotoExternal Photos2003-03-26PDF 601.8 KB
LocationID Label/Location Info2003-03-26PDF 8.4 KB
SampleID Label/Location Info2003-03-26PDF 132.4 KB
OPerational DescriptionOperational Description2003-03-26PDF 51.2 KB
Setup PicsTest Setup Photos2003-03-26PDF 449 KB
Test ReportTest Report2003-03-26PDF 2.2 MB
Confid RequestCover Letter(s)2003-03-26PDF 117.8 KB
DofCCover Letter(s)2003-03-26PDF 76.3 KB
Modular Approval RequestCover Letter(s)2003-03-26PDF 64.8 KB
RF ExposureRF Exposure Info2003-03-26PDF 102.6 KB
Block Metadata onlyBlock DiagramPDF 13 KB
Schema 1 Metadata onlySchematicsPDF 46.1 KB
Schema 2 Metadata onlySchematicsPDF 39.5 KB

Application Information

Application IDa+BdKSCReZWOnDCJuc8xXg==
Final Action Date2003-03-26
Application PurposeOriginal Equipment
Applicant FRN0005905971
ModelWM6001
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description54M WLAN Module
Responsible PartyYung-Chao Tang, Director, tonyi@kingmax.com.tw , 886 3 598 5288
Technical ContactEllis Wu, Advance Data Technology Corporation, ellis@adt.com.tw , +886 3 327 0910
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-2-2605-2180-3
TCB Emailhotline@americanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
a+BdKSCReZWOnDCJuc8xXg==2003-03-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.056000015C20, CE

Grants

TCB Grant - Application a+BdKSCReZWOnDCJuc8xXg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/26/2003

Application Dated: 03/26/2003
BroMax Communications Inc
No. 20, Kuang Fu Road
Hsin Chu Industrial Park
Hu Kou, Hsin Chu 303,
Taiwan
 
Attention: Yung-Chao Tang , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O6M-WM6001
Name of Grantee:  BroMax Communications Inc
Equipment Class: Digital Transmission System
Notes: 54M WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CE 15C 2412.0  -  2462.0 0.056  

Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application a+BdKSCReZWOnDCJuc8xXg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

BroMax Communications Inc
No. 20, Kuang Fu Road Hsin Chu Industrial Park
Hu Kou, Hsin Chu 303,
Taiwan
  Date of Grant: 03/26/2003

Application Dated: 03/26/2003
 
Attention: Yung-Chao Tang , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O6M-WM6001
Name of Grantee:  BroMax Communications Inc
Equipment Class: Digital Transmission System
Notes: 54M WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CE 15C 2412.0  -  2462.0 0.056  

Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: