FCC ID O76-T4SG0910A

Low Power Transmitter for Soap Dispenser (LTX2.0 Model)

by Gojo Industires, Inc.

Grantee Code: O76   Product Code: T4SG0910A
Latest application date: 2015-11-18

Device Images

FCC ID Device Details

FCC IDO76-T4SG0910A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeO76
Product CodeT4SG0910A
Applicant BusinessGojo Industires, Inc. 🇺🇸
Related Domains gojo.com
Equipment ClassLow Power Transmitter for Soap Dispenser (LTX2.0 Model)
Test FirmRF Solutions, LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
910 MHzClass II permissive change or modification of presently authorized equipment2015-11-18
910 MHzClass II permissive change or modification of presently authorized equipment2014-12-01
910 MHzOriginal Equipment2014-04-28

Exhibits

DocumentTypeAvailableFile
Intallation ManualUsers Manual2014-04-28PDF 1.2 MB
Users ManualUsers Manual2014-04-28PDF 377.8 KB
Internal Photos BottomInternal Photos2015-11-18PDF 592.8 KB
Internal Photos TopInternal Photos2015-11-18PDF 490.4 KB
Internal Photos 1Internal Photos2014-04-28PDF 589.3 KB
Internal Photos 2Internal Photos2014-04-28PDF 3.8 MB
External Photos BacksideExternal Photos2015-11-18PDF 973.3 KB
External Photos TopsideExternal Photos2015-11-18PDF 888.9 KB
External PhotosExternal Photos2014-12-01PDF 4.8 MB
External Photos 1External Photos2014-04-28PDF 3.9 MB
External Photos 2External Photos2014-04-28PDF 4.6 MB
External Photos 3External Photos2014-04-28PDF 4.4 MB
Label Sample and Location 1ID Label/Location Info2014-04-28PDF 223.6 KB
Label Sample and Location 2ID Label/Location Info2014-04-28PDF 5.5 MB
SchematicsSchematics2014-12-01PDF 29.7 KB
Test Setup Photos 1Test Setup Photos2014-12-01PDF 121.2 KB
Test Setup Photos 2Test Setup Photos2014-12-01PDF 111 KB
Test Setup Photos 1Test Setup Photos2014-04-28PDF 82.3 KB
Test Setup Photos 2Test Setup Photos2014-04-28PDF 57.7 KB
Test ReportTest Report2015-11-18PDF 3.7 MB
Test Report b ltx 2.0 1Test Report2014-12-01PDF 2.1 MB
Test Report b ltx 2.0 2Test Report2014-12-01PDF 1,010.6 KB
Test Report ltx 2.0 1Test Report2014-12-01PDF 2.2 MB
Test Report ltx 2.0 2Test Report2014-12-01PDF 2.7 MB
Test Report 1Test Report2014-04-28PDF 3.1 MB
Test Report 2Test Report2014-04-28PDF 3 MB
Class 2 Change Description LetterCover Letter(s)2015-11-18PDF 17.4 KB
Class 2 Change LetterCover Letter(s)2015-11-18PDF 35.5 KB
Limited Modular Approval LetterCover Letter(s)2015-11-18PDF 92.6 KB
Class II LetterCover Letter(s)2014-12-01PDF 17.5 KB
Modular Approval LetterCover Letter(s)2014-04-28PDF 15.9 KB
Request for ConfidentialityCover Letter(s)2014-04-28PDF 268.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 49.2 KB
Schematics Metadata onlySchematicsPDF 255.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 149.3 KB

Application Information

Application ID/VAotKlyyOsrHRdAJPHbwQ==
Final Action Date2015-11-18
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0002945194
ModelT4SG0910A
Frequency Range910 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionLow Power Transmitter for Soap Dispenser (LTX2.0 Model)
Responsible PartyAaron Reynolds, New Systems Engineering Manager, reynoldsa@gojo.com , 330-255-6347
Test FirmThomas Sims, RF Solutions, LLC, tom@dttlab.com , 315-457-0245
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular Approval. This module is approved for use when installed in host brand name Gojo Industries, Inc., and only the following model numbers: LTX-7 and LTX-12. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. (Date of Grant: 04/28/2014) Class II Permissive Change: This Class II Permissive Change is because the layout changes to the transmitter Printed Circuit Board (PCB) to eliminate the antenna switch and the second antenna.

Applications

Application IDDatePurpose
/VAotKlyyOsrHRdAJPHbwQ==2015-11-18Class II permissive change or modification of presently authorized equipment
aJDMqotf5BAmn5tWuNtETg==2014-12-01Class II permissive change or modification of presently authorized equipment
hhoXYmOca10natlsWwvKwA==2014-04-28Original Equipment

Equipment Authorization

FrequencyRules
910 MHz15C

Grants

TCB Grant - Application hhoXYmOca10natlsWwvKwA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/28/2014

Application Dated: 04/28/2014
Gojo Industires, Inc.
One Gojo Plaza
Suite 500P.O. Box 991,
Akron, OH 44311
 
Attention: Aaron Reynolds , New Systems Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O76-T4SG0910A
Name of Grantee:  Gojo Industires, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Low Power Transmitter for Soap Dispenser (LTX Model)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 910.0  -  910.0  

Limited Single Modular Approval. This module is approved for use when installed in host brand name Gojo Industries, Inc., and only the following model numbers: LTX-7 and LTX-12. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.

EAS Grant - Application hhoXYmOca10natlsWwvKwA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gojo Industires, Inc.
One Gojo Plaza Suite 500P.O. Box 991,
Akron, OH 44311
United States
  Date of Grant: 04/28/2014

Application Dated: 04/28/2014
 
Attention: Aaron Reynolds , New Systems Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O76-T4SG0910A
Name of Grantee:  Gojo Industires, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Low Power Transmitter for Soap Dispenser (LTX Model)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 910.0  -  910.0  

Limited Single Modular Approval. This module is approved for use when installed in host brand name Gojo Industries, Inc., and only the following model numbers: LTX-7 and LTX-12. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.



TCB Grant - Application aJDMqotf5BAmn5tWuNtETg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/01/2014

Application Dated: 12/01/2014
Gojo Industires, Inc.
One Gojo Plaza
Suite 500P.O. Box 991,
Akron, OH 44311
 
Attention: Aaron Reynolds , New Systems Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O76-T4SG0910A
Name of Grantee:  Gojo Industires, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Low Power Transmitter for Soap Dispenser (LTX2.0 Model)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 910.0  -  910.0  

Limited Single Modular Approval. This module is approved for use when installed in host brand name Gojo Industries, Inc., and only the following model numbers: LTX-7 and LTX-12. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. (Date of Grant: 04/28/2014)

Class II Permissive Change: This Class II Permissive Change is because the Host had a design change to the pump motor which also affected the housing around the pump that the Limited Module attaches to.


EAS Grant - Application aJDMqotf5BAmn5tWuNtETg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gojo Industires, Inc.
One Gojo Plaza Suite 500P.O. Box 991,
Akron, OH 44311
United States
  Date of Grant: 12/01/2014

Application Dated: 12/01/2014
 
Attention: Aaron Reynolds , New Systems Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O76-T4SG0910A
Name of Grantee:  Gojo Industires, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Low Power Transmitter for Soap Dispenser (LTX2.0 Model)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 910.0  -  910.0  

Limited Single Modular Approval. This module is approved for use when installed in host brand name Gojo Industries, Inc., and only the following model numbers: LTX-7 and LTX-12. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. (Date of Grant: 04/28/2014)

Class II Permissive Change: This Class II Permissive Change is because the Host had a design change to the pump motor which also affected the housing around the pump that the Limited Module attaches to.



TCB Grant - Application /VAotKlyyOsrHRdAJPHbwQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/18/2015

Application Dated: 11/18/2015
Gojo Industires, Inc.
One Gojo Plaza
Suite 500P.O. Box 991,
Akron, OH 44311
 
Attention: Aaron Reynolds , New Systems Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O76-T4SG0910A
Name of Grantee:  Gojo Industires, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Low Power Transmitter for Soap Dispenser (LTX2.0 Model)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 910.0  -  910.0  

Limited Single Modular Approval. This module is approved for use when installed in host brand name Gojo Industries, Inc., and only the following model numbers: LTX-7 and LTX-12. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. (Date of Grant: 04/28/2014)

Class II Permissive Change: This Class II Permissive Change is because the layout changes to the transmitter Printed Circuit Board (PCB) to eliminate the antenna switch and the second antenna.


EAS Grant - Application /VAotKlyyOsrHRdAJPHbwQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gojo Industires, Inc.
One Gojo Plaza Suite 500P.O. Box 991,
Akron, OH 44311
United States
  Date of Grant: 11/18/2015

Application Dated: 11/18/2015
 
Attention: Aaron Reynolds , New Systems Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O76-T4SG0910A
Name of Grantee:  Gojo Industires, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Low Power Transmitter for Soap Dispenser (LTX2.0 Model)
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 910.0  -  910.0  

Limited Single Modular Approval. This module is approved for use when installed in host brand name Gojo Industries, Inc., and only the following model numbers: LTX-7 and LTX-12. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. (Date of Grant: 04/28/2014)

Class II Permissive Change: This Class II Permissive Change is because the layout changes to the transmitter Printed Circuit Board (PCB) to eliminate the antenna switch and the second antenna.



Mail To: