FCC ID O7H-IRISX-P

IP MULTIMEDIA PHONE

by ACN Digital Phone Service,LLC

Grantee Code: O7H   Product Code: IRISXP
Latest application date: 2013-01-23

FCC ID Device Details

FCC IDO7H-IRISX-P
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeO7H
Product CodeIRISXP
Applicant BusinessACN Digital Phone Service,LLC 🇺🇸
Related Domains acninc.com
Equipment ClassIP MULTIMEDIA PHONE
Test FirmGalanz

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: YZZGXV3175-P Grant Date: 01/21/20132013-01-23

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2013-01-23PDF 1.2 MB
External PhotosExternal Photos2013-01-23PDF 76.5 KB
Label InfoID Label/Location Info2013-01-23PDF 72.6 KB
Authorization LetterCover Letter(s)2013-01-23PDF 36.6 KB
Cover LetterCover Letter(s)2013-01-23PDF 19.5 KB
Permission LetterCover Letter(s)2013-01-23PDF 25.5 KB

Application Information

Application IDV7LFiNMSjcEn8StRVsiH/g==
Final Action Date2013-01-23
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: YZZGXV3175-P Grant Date: 01/21/2013
Applicant FRN0021791504
Model-IRISX-P
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIP MULTIMEDIA PHONE
Responsible PartyMichael Brousseau, VP Network Engineering, MBrousse@acninc.com , (704)2603466
Test FirmLu Han, Galanz, Ivan_wen.sz@ecmg-global.com , 86-757-23612690
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.

Applications

Application IDDatePurpose
V7LFiNMSjcEn8StRVsiH/g==2013-01-23Change in identification of presently authorized equipment. Original FCC ID: YZZGXV3175-P Grant Date: 01/21/2013
Gt+LRplf8ZvTAx8nqeWyHg==2013-01-23Change in identification of presently authorized equipment. Original FCC ID: YZZGXV3175-P Grant Date: 01/21/2013

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2412-2462 MHz0.19615CCC
2422-2452 MHz0.12715CCC

Grants

TCB Grant - Application V7LFiNMSjcEn8StRVsiH/g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 01/23/2013

Application Dated: 01/23/2013
ACN Digital Phone Service,LLC
1000 Progress Place,
Concord, NCP.O. Box 28025,
Concord, NC 28025
 
Attention: Michael Brousseau , VP Network Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O7H-IRISX-P
Name of Grantee:  ACN Digital Phone Service,LLC
Equipment Class: Digital Transmission System
Notes: IP MULTIMEDIA PHONE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.196  
CC 15C 2422.0  -  2452.0 0.127  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application V7LFiNMSjcEn8StRVsiH/g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ACN Digital Phone Service,LLC
1000 Progress Place, Concord, NCP.O. Box 28025,
Concord, NC 28025
United States
  Date of Grant: 01/23/2013

Application Dated: 01/23/2013
 
Attention: Michael Brousseau , VP Network Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O7H-IRISX-P
Name of Grantee:  ACN Digital Phone Service,LLC
Equipment Class: Digital Transmission System
Notes: IP MULTIMEDIA PHONE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.196  
CC 15C 2422.0  -  2452.0 0.127  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Gt+LRplf8ZvTAx8nqeWyHg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 01/23/2013

Application Dated: 01/23/2013
ACN Digital Phone Service,LLC
1000 Progress Place,
Concord, NCP.O. Box 28025,
Concord, NC 28025
 
Attention: Michael Brousseau , VP Network Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O7H-IRISX-P
Name of Grantee:  ACN Digital Phone Service,LLC
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: IP MULTIMEDIA PHONE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Gt+LRplf8ZvTAx8nqeWyHg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ACN Digital Phone Service,LLC
1000 Progress Place, Concord, NCP.O. Box 28025,
Concord, NC 28025
United States
  Date of Grant: 01/23/2013

Application Dated: 01/23/2013
 
Attention: Michael Brousseau , VP Network Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O7H-IRISX-P
Name of Grantee:  ACN Digital Phone Service,LLC
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: IP MULTIMEDIA PHONE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: