FCC ID O7KPL5161

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669

Date of Grant: 08/01/2006 Application Dated: 08/01/2006

Midland Radio Corporation

5900 Parretta Drive

Kansas City, MO 64120-2134

Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	O7KPL5161
Name of Grantee:	Midland Radio Corporation
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	VHF RADIO

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90, 90.210	148.0  -  174.0	5.3	3.8  PM	16K0F3E
	90, 90.210	148.0  -  174.0	1.2	3.8  PM	16K0F3E
	90, 90.210	148.0  -  174.0	5.3	3.8  PM	11K0F3E
	90, 90.210	148.0  -  174.0	1.2	3.8  PM	11K0F3E

Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the two antennas tested for this filing in Push to Talk and body worn configurations. Body worn SAR compliance is limited to the specific belt clip and speaker/microphone configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor are Head: 5.45 W/kg; Body worn: 1.74 W/kg. This Class II Change replaces an obsolete Integrated Circuit.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Midland Radio Corporation 5900 Parretta Drive Kansas City, MO 64120-2134 United States

Date of Grant: 08/01/2006 Application Dated: 08/01/2006

Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	O7KPL5161
Name of Grantee:	Midland Radio Corporation
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	VHF RADIO
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90, 90.210	148.0  -  174.0	5.3	3.8  PM	16K0F3E
	90, 90.210	148.0  -  174.0	1.2	3.8  PM	16K0F3E
	90, 90.210	148.0  -  174.0	5.3	3.8  PM	11K0F3E
	90, 90.210	148.0  -  174.0	1.2	3.8  PM	11K0F3E

Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the two antennas tested for this filing in Push to Talk and body worn configurations. Body worn SAR compliance is limited to the specific belt clip and speaker/microphone configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor are Head: 5.45 W/kg; Body worn: 1.74 W/kg. This Class II Change replaces an obsolete Integrated Circuit.

TCB Grant - Application jjjj/9vbCNCYMKd2JH9cTQ==

EAS Grant - Application jjjj/9vbCNCYMKd2JH9cTQ==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Midland Radio Corporation 5900 Parretta Drive Kansas City, MO 64120-2134 United States

Date of Grant: 04/15/2002 Application Dated: 01/22/2002

Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	O7KPL5161
Name of Grantee:	Midland Radio Corporation
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	PL5161 Portable Radio
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	148.0  -  174.0	5.3	3.8  PM	16K0F3E
	90	148.0  -  174.0	1.2	3.8  PM	16K0F3E
	90.210	148.0  -  174.0	5.3	3.8  PM	11K0F3E
	90.210	148.0  -  174.0	1.2	3.8  PM	11K0F3E

Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the two antennas tested for this filing in Push to Talk and body worn configurations. Body worn SAR compliance is limited to the specific belt clip and speaker/microphone configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor are Head: 5.45 W/kg; Body worn: 1.74 W/kg.

Mail To: