FCC ID O7N-CWFB201-XXX

5G+2.4G 2T2R AP FMC

by ChipSiP Technology Co.,Ltd.

Grantee Code: O7N   Product Code: CWFB201XXX
Latest application date: 2012-09-14

FCC ID Device Details

FCC IDO7N-CWFB201-XXX
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeO7N
Product CodeCWFB201XXX
Applicant BusinessChipSiP Technology Co.,Ltd. 🇹🇼
Related Domains chipsip.com quietek.com
Equipment Class5G+2.4G 2T2R AP FMC
Test FirmQuieTek Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2012-09-14
5180-5240 MHzOriginal Equipment2012-09-14

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2012-09-14PDF 740.1 KB
user manual revUsers Manual2012-09-14PDF 946.2 KB
internal photoInternal Photos2012-09-14PDF 462.3 KB
external photoExternal Photos2012-09-14PDF 462.3 KB
ID Label revID Label/Location Info2012-09-14PDF 52.9 KB
Label location infoID Label/Location Info2012-09-14PDF 61 KB
test setup photoTest Setup Photos2012-09-14PDF 628.8 KB
Test reportTest Report2012-09-14PDF 3.3 MB
Test reportTest Report2012-09-14PDF 4.6 MB
test report revTest Report2012-09-14PDF 3.3 MB
test report revTest Report2012-09-14PDF 4.6 MB
attestation letterCover Letter(s)2012-09-14PDF 28.2 KB
Modular approval letterCover Letter(s)2012-09-14PDF 66.4 KB
confidentialityCover Letter(s)2012-09-14PDF 34.2 KB
declaration of authorizationCover Letter(s)2012-09-14PDF 32.2 KB
RF exposure infoRF Exposure Info2012-09-14PDF 50.2 KB

Application Information

Application IDV0RuMDXOSLP7tgXKM24MKQ==
Final Action Date2012-09-14
Application PurposeOriginal Equipment
Applicant FRN0021803978
Model-CWFB201-XXX
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description5G+2.4G 2T2R AP FMC
Responsible PartyRoger Wang, Senior Engineer, RogerWang@chipsip.com , 886-2-82271799
AgentGene Gene Gene, QuieTek Corporation, gene@quietek.com , 886-2-8792-6808
Technical ContactNeil Yeh, QuieTek Corporation, neilyeh@quietek.com , 886-3-592-8858
Non-Technical ContactNeil Yeh, QuieTek Corporation, neilyeh@quietek.com
Test FirmWarren Lin, QuieTek Corporation, warren@quietek.com , 886-3592-8858
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths.

Applications

Application IDDatePurpose
V0RuMDXOSLP7tgXKM24MKQ==2012-09-14Original Equipment
PWhC14sroPX4RjnZG/QavQ==2012-09-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.1515CCC
5180-5240 MHz0.04815ECC, MO
5190-5230 MHz0.04415ECC, MO
5745-5825 MHz0.0715CMO

Grants

TCB Grant - Application V0RuMDXOSLP7tgXKM24MKQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 09/14/2012

Application Dated: 09/08/2012
ChipSiP Technology Co.,Ltd.
8F-1,No.186,Jian 1st Rd.,Zhonghe District.
New Taipei City, 235
Taiwan
 
Attention: Roger Wang , Senior Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O7N-CWFB201-XXX
Name of Grantee:  ChipSiP Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: 5G+2.4G 2T2R AP FMC
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.15  
MO 15C 5745.0  -  5825.0 0.07  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application V0RuMDXOSLP7tgXKM24MKQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ChipSiP Technology Co.,Ltd.
8F-1,No.186,Jian 1st Rd.,Zhonghe District.
New Taipei City, 235
Taiwan
  Date of Grant: 09/14/2012

Application Dated: 09/08/2012
 
Attention: Roger Wang , Senior Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O7N-CWFB201-XXX
Name of Grantee:  ChipSiP Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: 5G+2.4G 2T2R AP FMC
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.15  
MO 15C 5745.0  -  5825.0 0.07  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application PWhC14sroPX4RjnZG/QavQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 09/14/2012

Application Dated: 09/08/2012
ChipSiP Technology Co.,Ltd.
8F-1,No.186,Jian 1st Rd.,Zhonghe District.
New Taipei City, 235
Taiwan
 
Attention: Roger Wang , Senior Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O7N-CWFB201-XXX
Name of Grantee:  ChipSiP Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5G+2.4G 2T2R AP FMC
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.048  
CC MO 15E 5190.0  -  5230.0 0.044  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application PWhC14sroPX4RjnZG/QavQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ChipSiP Technology Co.,Ltd.
8F-1,No.186,Jian 1st Rd.,Zhonghe District.
New Taipei City, 235
Taiwan
  Date of Grant: 09/14/2012

Application Dated: 09/08/2012
 
Attention: Roger Wang , Senior Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O7N-CWFB201-XXX
Name of Grantee:  ChipSiP Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5G+2.4G 2T2R AP FMC
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.048  
CC MO 15E 5190.0  -  5230.0 0.044  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: