FCC ID O7P-4343
Wireless 2.4 GHz radio module
by Inventek Systems
Grantee Code: O7P Product Code: 4343
Latest application date: 2022-06-10
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-10 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-10 |
| 2402-2480 MHz | Original Equipment | 2022-04-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-04-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-04-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2020-04-03 |
| 2402-2480 MHz | Original Equipment | 2018-11-15 |
| 2402-2480 MHz | Original Equipment | 2018-11-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-06-10 | PDF 396.1 KB |
| User Manual | Users Manual | 2022-04-25 | PDF 1.7 MB |
| Users manual | Users Manual | 2020-04-03 | PDF 1.4 MB |
| User Manual | Users Manual | 2018-11-15 | PDF 1.6 MB |
| Internal Photos | Internal Photos | 2022-06-10 | PDF 440.2 KB |
| Internal Photo Letter | Cover Letter(s) | 2022-04-25 | PDF 62.7 KB |
| Internal Photos | Internal Photos | 2022-04-25 | PDF 209 KB |
| Declaration for Internal Photo | Internal Photos | 2018-11-15 | PDF 62.7 KB |
| Internal Photo | Internal Photos | 2018-11-15 | PDF 209 KB |
| External Photos | External Photos | 2022-06-10 | PDF 306.3 KB |
| External Photos | External Photos | 2022-04-25 | PDF 473.1 KB |
| External Photos | External Photos | 2022-04-22 | PDF 854.5 KB |
| External photo | External Photos | 2020-04-03 | PDF 2.1 MB |
| External Photo | External Photos | 2018-11-15 | PDF 473.1 KB |
| Label | ID Label/Location Info | 2022-06-10 | PDF 930.7 KB |
| Label Info | ID Label/Location Info | 2022-04-25 | PDF 178.8 KB |
| Label Information | ID Label/Location Info | 2022-04-22 | PDF 178.8 KB |
| ID label/Location info | ID Label/Location Info | 2020-04-03 | PDF 99.7 KB |
| Product Label | ID Label/Location Info | 2018-11-15 | PDF 231.7 KB |
| Block diagram | Block Diagram | 2020-04-03 | PDF 42.2 KB |
| Test Setup Photos | Test Setup Photos | 2022-04-25 | PDF 857.5 KB |
| Test setup photo | Test Setup Photos | 2020-04-03 | PDF 352 KB |
| Test Setup Photo | Test Setup Photos | 2018-11-15 | PDF 857.5 KB |
| Test Report | Test Report | 2022-04-25 | PDF 235.4 KB |
| Test Report DSS | Test Report | 2022-04-22 | PDF 332.3 KB |
| Test Report DTS pt1 | Test Report | 2022-04-22 | PDF 3.1 MB |
| Test Report DTS pt2 | Test Report | 2022-04-22 | PDF 5.4 MB |
| Test report | Test Report | 2020-04-03 | PDF 1.1 MB |
| BLE Test Report | Test Report | 2018-11-15 | PDF 681.7 KB |
| DSS Test Report | Test Report | 2018-11-15 | PDF 861.8 KB |
| WiFi Test Report | Test Report | 2018-11-15 | PDF 3.1 MB |
| Agency Agreement | Cover Letter(s) | 2022-06-10 | PDF 33.2 KB |
| Confidentiality Request | Cover Letter(s) | 2022-06-10 | PDF 27.6 KB |
| Permissive Change Letter | Cover Letter(s) | 2022-06-10 | PDF 36.9 KB |
| Agent Authorization Letter | Cover Letter(s) | 2022-04-25 | PDF 33.2 KB |
| Confidential Letter | Cover Letter(s) | 2022-04-25 | PDF 32.5 KB |
| Modular Approval Letter | Cover Letter(s) | 2022-04-25 | PDF 88.4 KB |
| C2PC Letter | Cover Letter(s) | 2022-04-22 | PDF 51.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2022-04-22 | PDF 27.5 KB |
| POA Letter | Cover Letter(s) | 2022-04-22 | PDF 33.2 KB |
| C2PC request letter | Cover Letter(s) | 2020-04-03 | PDF 151.6 KB |
| Power of Attorney | Cover Letter(s) | 2020-04-03 | PDF 37 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2018-11-15 | PDF 32.5 KB |
| Declaration for Modular Approval | Cover Letter(s) | 2018-11-15 | PDF 88.4 KB |
| Power of Attorney | Cover Letter(s) | 2018-11-15 | PDF 33.2 KB |
| SAR Report | RF Exposure Info | 2022-06-10 | PDF 1,020.3 KB |
| MPE Report | RF Exposure Info | 2022-04-22 | PDF 122.1 KB |
| MPE Report | RF Exposure Info | 2022-04-22 | PDF 122.2 KB |
| MPE Calculation | RF Exposure Info | 2018-11-15 | PDF 122.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 3.3 MB | |
| Block Diagram Metadata only | Block Diagram | PDF 92.6 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 86.3 KB | |
| Schematics Metadata only | Schematics | PDF 3.8 MB | |
| Schematics Metadata only | Schematics | PDF 99.8 KB | |
| Operation Description Metadata only | Operational Description | PDF 632.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 632.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 898.1 KB |
Application Information
| Application ID | V2XDRWN5GXv3Lc150zOw5A== |
|---|---|
| Final Action Date | 2022-06-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021554423 |
| Model | 4343 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter |
| Device Description | Wireless 2.4 GHz radio module |
| Responsible Party | Martin Tierney, President, martint@inventeksys.com  , 978-667-1962 |
| Test Firm | George Yang, US Tech, gyang@ustech-lab.com  , 770-740-0717 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change: Authorizes portable use when integrated into the Beam Brush Pearl. The highest reported SAR was < 0.10 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| V2XDRWN5GXv3Lc150zOw5A== | 2022-06-10 | Class II permissive change or modification of presently authorized equipment |
| OA529o+YzdI4vzo5isU7mA== | 2022-06-10 | Class II permissive change or modification of presently authorized equipment |
| LEIeYiTCPkX/vml+piAePw== | 2022-06-10 | Class II permissive change or modification of presently authorized equipment |
| Hy/tH+KYHL4K1jWjLt8u+g== | 2022-04-25 | Original Equipment |
| c9BpxMYX86E/TQRwvuIO3A== | 2022-04-22 | Class II permissive change or modification of presently authorized equipment |
| QSF13OoosbIZ+G/xQWhY1A== | 2022-04-22 | Class II permissive change or modification of presently authorized equipment |
| 3WPJDeM+6YuOq989kuwxgQ== | 2020-04-03 | Class II permissive change or modification of presently authorized equipment |
| JJ9kj6/fj4pcsPVeitfW7w== | 2018-11-15 | Original Equipment |
| /0RVeVj9VZMrwCmI7SRNFQ== | 2018-11-15 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application V2XDRWN5GXv3Lc150zOw5A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/10/2022 Application Dated: 06/10/2022 |
| Inventek Systems |
| 2 Republic Road |
| Billerica, MA 01862 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Class II Permissive Change: Authorizes portable use when integrated into the Beam Brush Pearl. The highest reported SAR was < 0.10 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application V2XDRWN5GXv3Lc150zOw5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventek Systems 2 Republic Road P.O. Box , Billerica, MA 01862 United States |
Date of Grant: 06/10/2022 Application Dated: 06/10/2022 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Class II Permissive Change: Authorizes portable use when integrated into the Beam Brush Pearl. The highest reported SAR was < 0.10 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 04/22/2022 Application Dated: 04/22/2022 |
| Inventek Systems |
| 2 Republic Road |
| Billerica, MA 01862 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.221 |
| C2PC: Adding a trace antenna design to the original certified module. Class II Permissive Change : The changes are (a) to incorporate this Module into new host (ioDent® gateway mini from Microtronics Engineering GmbH), (b) to deactivate Bluetooth by software. Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QSF13OoosbIZ+G/xQWhY1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventek Systems 2 Republic Road P.O. Box , Billerica, MA 01862 United States |
Date of Grant: 04/22/2022 Application Dated: 04/22/2022 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.221 |
| C2PC: Adding a trace antenna design to the original certified module. Class II Permissive Change : The changes are (a) to incorporate this Module into new host (ioDent® gateway mini from Microtronics Engineering GmbH), (b) to deactivate Bluetooth by software. Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/10/2022 Application Dated: 06/10/2022 |
| Inventek Systems |
| 2 Republic Road |
| Billerica, MA 01862 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change: Authorizes portable use when integrated into the Beam Brush Pearl. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application OA529o+YzdI4vzo5isU7mA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventek Systems 2 Republic Road P.O. Box , Billerica, MA 01862 United States |
Date of Grant: 06/10/2022 Application Dated: 06/10/2022 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change: Authorizes portable use when integrated into the Beam Brush Pearl. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/10/2022 Application Dated: 06/10/2022 |
| Inventek Systems |
| 2 Republic Road |
| Billerica, MA 01862 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.221 |
| instructions and transmitter operating conditions for satisfying RF exposure compliance. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change: Authorizes portable use when integrated into the Beam Brush Pearl. The highest reported SAR was 1.01 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application LEIeYiTCPkX/vml+piAePw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventek Systems 2 Republic Road P.O. Box , Billerica, MA 01862 United States |
Date of Grant: 06/10/2022 Application Dated: 06/10/2022 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.221 |
| instructions and transmitter operating conditions for satisfying RF exposure compliance. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Class II Permissive Change: Authorizes portable use when integrated into the Beam Brush Pearl. The highest reported SAR was 1.01 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/15/2018 Application Dated: 11/15/2018 |
| Inventek Systems |
| 2 Republic Road |
| Billerica, MA 01862 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Transceiver module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2213 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application JJ9kj6/fj4pcsPVeitfW7w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventek Systems 2 Republic Road P.O. Box , Billerica, MA 01862 United States |
Date of Grant: 11/15/2018 Application Dated: 11/15/2018 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Transceiver module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2213 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 04/25/2022 Application Dated: 04/25/2022 |
| Inventek Systems |
| 2 Republic Road |
| Billerica, MA 01862 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Hy/tH+KYHL4K1jWjLt8u+g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventek Systems 2 Republic Road P.O. Box , Billerica, MA 01862 United States |
Date of Grant: 04/25/2022 Application Dated: 04/25/2022 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 04/22/2022 Application Dated: 04/22/2022 |
| Inventek Systems |
| 2 Republic Road |
| Billerica, MA 01862 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| C2PC: Adding a trace antenna design to the original certified module. Class II Permissive Change : The changes are (a) to incorporate this Module into new host(ioDent® gateway mini from Microtronics Engineering GmbH), (b) to deactivate Bluetooth by software. Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application c9BpxMYX86E/TQRwvuIO3A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventek Systems 2 Republic Road P.O. Box , Billerica, MA 01862 United States |
Date of Grant: 04/22/2022 Application Dated: 04/22/2022 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless 2.4 GHz radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| C2PC: Adding a trace antenna design to the original certified module. Class II Permissive Change : The changes are (a) to incorporate this Module into new host(ioDent® gateway mini from Microtronics Engineering GmbH), (b) to deactivate Bluetooth by software. Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/03/2020 Application Dated: 04/01/2020 |
| Inventek Systems |
| 2 Republic Road |
| Billerica, MA 01862 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Transceiver module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.22 |
| Class II Permissive Change : The changes are (a) to incorporate this Module into new host(ioDent® gateway mini from Microtronics Engineering GmbH), (b) to deactivate Bluetooth by software. Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 3WPJDeM+6YuOq989kuwxgQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventek Systems 2 Republic Road P.O. Box , Billerica, MA 01862 United States |
Date of Grant: 04/03/2020 Application Dated: 04/01/2020 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Transceiver module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.22 |
| Class II Permissive Change : The changes are (a) to incorporate this Module into new host(ioDent® gateway mini from Microtronics Engineering GmbH), (b) to deactivate Bluetooth by software. Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/15/2018 Application Dated: 11/15/2018 |
| Inventek Systems |
| 2 Republic Road |
| Billerica, MA 01862 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI Transceiver module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0064 |
| Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /0RVeVj9VZMrwCmI7SRNFQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inventek Systems 2 Republic Road P.O. Box , Billerica, MA 01862 United States |
Date of Grant: 11/15/2018 Application Dated: 11/15/2018 |
| Attention: Martin Tierney , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O7P-4343 |
| Name of Grantee: | Inventek Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI Transceiver module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0064 |
| Modular Approval. Power Output listed is Conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Integrators are responsible for compliance with the integral antenna requirements of 15.407(d). End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |