FCC ID O8F-PIXEW
CDMA/1x EVDO Rel 0 / EVDO Rev. A with WiFi and Bluetooth Phone
by Palm Inc
Grantee Code: O8F Product Code: PIXEW
Latest application date: 2009-12-13
FCC ID Device Details
Hearing Aid Compatibility
| Handset Maker | Palm |
|---|---|
| Model Name | Pixi Plus-E |
| Air Interface Technologies | CDMA, CDMA |
| Operating Frequency Bands | 850, 1900 |
| M-Rating | M4 |
| M-Rating Certification Date | 12/13/09 |
| M-Rating ANSI Version | 2007 |
| T-Rating | T4 |
| T-Rating Certification Date | 12/13/09 |
| T-Rating ANSI Version | 2007 |
| Wi-Fi Interface | N |
| Remarks | Product was EOL (end of life) in 5/10. Remaining inventory was sold during this reporting period. |
Source: FCC archived Device Manufacturer Summary Reports (2010-2012).
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2009-12-13 |
| 824.7-848.31 MHz | Original Equipment | 2009-12-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2010-01-25 | PDF 779.7 KB |
| Internal Photos | Internal Photos | 2010-01-25 | PDF 1.8 MB |
| External Photos | External Photos | 2010-01-25 | PDF 972.1 KB |
| ID label format and location | ID Label/Location Info | 2009-12-13 | PDF 44 KB |
| Id label format and location | ID Label/Location Info | 2009-12-13 | PDF 44 KB |
| HAC RF Test Setup Photos | Test Setup Photos | 2010-01-25 | PDF 115.8 KB |
| HAC T Coil Test Setup Photos | Test Setup Photos | 2010-01-25 | PDF 119 KB |
| Revised SAR Test Setup Photos | Test Setup Photos | 2010-01-25 | PDF 437.4 KB |
| SAR Test Setup Photos | Test Setup Photos | 2010-01-25 | PDF 437.4 KB |
| Test Setup Photos | Test Setup Photos | 2010-01-25 | PDF 263.6 KB |
| Test Setup Photos | Test Setup Photos | 2010-01-25 | PDF 260.6 KB |
| HAC RF Calibration Certificate 1 of 4 | Test Report | 2009-12-13 | PDF 555.6 KB |
| HAC RF Calibration Certificate 2 of 4 | Test Report | 2009-12-13 | PDF 554.8 KB |
| HAC RF Calibration Certificate 3 of 4 | Test Report | 2009-12-13 | PDF 500.2 KB |
| HAC RF Calibration Certificate 4 of 4 | Test Report | 2009-12-13 | PDF 510.5 KB |
| HAC RF Emission for 1900 | Test Report | 2009-12-13 | PDF 4 MB |
| HAC RF Emission plots for 835 | Test Report | 2009-12-13 | PDF 3.9 MB |
| HAC RF Test Report | Test Report | 2009-12-13 | PDF 225.9 KB |
| HAC T Coil Calibration Certificate | Test Report | 2009-12-13 | PDF 259.9 KB |
| HAC T Coil plots for 1900 | Test Report | 2009-12-13 | PDF 1.1 MB |
| HAC T Coil plots for 850 | Test Report | 2009-12-13 | PDF 936.1 KB |
| HAC T colil Test Report | Test Report | 2009-12-13 | PDF 293.6 KB |
| HAC system Validation plots | Test Report | 2009-12-13 | PDF 1.5 MB |
| Revised SAR Test Report | RF Exposure Info | 2009-12-13 | PDF 1.5 MB |
| SAR Test Report | RF Exposure Info | 2009-12-13 | PDF 1.5 MB |
| Test Report | Test Report | 2009-12-13 | PDF 1.5 MB |
| Test Report | Test Report | 2009-12-13 | PDF 2.6 MB |
| Request for confidentiality letter | Cover Letter(s) | 2009-12-13 | PDF 45.4 KB |
| SAR Dipole 1900 | RF Exposure Info | 2009-12-13 | PDF 621.3 KB |
| SAR Dipole 1900 Certificate | RF Exposure Info | 2009-12-13 | PDF 621.3 KB |
| SAR Dipole 2450 | RF Exposure Info | 2009-12-13 | PDF 439.4 KB |
| SAR Dipole 835 | RF Exposure Info | 2009-12-13 | PDF 634.1 KB |
| SAR Dipole 835 Certificate | RF Exposure Info | 2009-12-13 | PDF 634.1 KB |
| SAR Probe Calibration Certificate | RF Exposure Info | 2009-12-13 | PDF 677.3 KB |
| SAR System Validation Plots | RF Exposure Info | 2009-12-13 | PDF 1.1 MB |
| SAR plots for 1900 | RF Exposure Info | 2009-12-13 | PDF 1.3 MB |
| SAR plots for 1900 | RF Exposure Info | 2009-12-13 | PDF 3.9 MB |
| SAR plots for 850 | RF Exposure Info | 2009-12-13 | PDF 1.1 MB |
| SAR plots for 850 | RF Exposure Info | 2009-12-13 | PDF 3.6 MB |
| SAR plots for WiFi | RF Exposure Info | 2009-12-13 | PDF 888.1 KB |
| SAR probe Certificate | RF Exposure Info | 2009-12-13 | PDF 677.3 KB |
| SAR system performance plots | RF Exposure Info | 2009-12-13 | PDF 1.1 MB |
Application Information
| Application ID | eiqRLIvoGJZEjyFw4P69Bw== |
|---|---|
| Final Action Date | 2009-12-13 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0007381593 |
| Model | -PIXEW |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | CDMA/1x EVDO Rel 0 / EVDO Rev. A with WiFi and Bluetooth Phone |
| Responsible Party | Helen Zhao, Sr. Regulatory Compliance Engineer, helen.zhao@palm.com  , (408) 617-6508 |
| Test Firm | Thu Chan, Compliance Certification Services, thu.chan@ccsemc.com  , 510-771-1122 |
| TCB Email | mike.kuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/25/2010 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. This device is co-located in a Part 22/24 handset. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is limited to the specific configurations tested in filings under this FCC ID. Body-worn operations are restricted to manufacturer accessories supplied or designated for the device or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and a user's body. End users must be informed of the body-worn requirements for satisfying RF exposure compliance. The highest reported SAR values for this FCC ID are: Part 22 head: 1.23 W/kg; body-worn: 0.73 W/kg; Part 24 head: 1.47 W/kg; body-worn: 0.634 W/kg; Part 15C head: 0.1 W/kg; body-worn: 0.025 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| eiqRLIvoGJZEjyFw4P69Bw== | 2009-12-13 | Original Equipment |
| ZI7VYPt+K/dryswM/iaD4w== | 2009-12-13 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZI7VYPt+K/dryswM/iaD4w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/13/2009 Application Dated: 12/13/2009 |
| Palm Inc |
| 950 West Maude Ave |
| Sunnyvale, CA 94085 |
| Attention: Helen Zhao , Sr. Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O8F-PIXEW |
| Name of Grantee: | Palm Inc |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | CDMA/1x EVDO Rel 0 / EVDO Rev. A with WiFi and Bluetooth Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.6607 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.8 | 0.8128 | 2.5 PM | 1M28F9W |
| Output power is ERP for Part 22 and EIRP for Part 24. SAR compliance for collocated operating configurations with WiFi and Bluetooth have been evaluated as described in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is limited to the specific configurations tested in filings under this FCC ID. Body-worn operations are restricted to manufacturer accessories supplied or designated for the device or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and a user's body. End users must be informed of the body-worn requirements for satisfying RF exposure compliance. The highest reported SAR values for this FCC ID are: Part 22 head: 1.23 W/kg; body-worn: 0.73 W/kg; Part 24 head: 1.47 W/kg; body-worn: 0.634 W/kg; Part 15C head:0.1 W/kg; body-worn: 0.025 W/kg. HAC Rating: M4/T4-2007. |
EAS Grant - Application ZI7VYPt+K/dryswM/iaD4w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Palm Inc 950 West Maude Ave Sunnyvale, CA 94085 United States |
Date of Grant: 12/13/2009 Application Dated: 12/13/2009 |
| Attention: Helen Zhao , Sr. Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O8F-PIXEW |
| Name of Grantee: | Palm Inc |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | CDMA/1x EVDO Rel 0 / EVDO Rev. A with WiFi and Bluetooth Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.6607 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.8 | 0.8128 | 2.5 PM | 1M28F9W |
| Output power is ERP for Part 22 and EIRP for Part 24. SAR compliance for collocated operating configurations with WiFi and Bluetooth have been evaluated as described in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is limited to the specific configurations tested in filings under this FCC ID. Body-worn operations are restricted to manufacturer accessories supplied or designated for the device or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and a user's body. End users must be informed of the body-worn requirements for satisfying RF exposure compliance. The highest reported SAR values for this FCC ID are: Part 22 head: 1.23 W/kg; body-worn: 0.73 W/kg; Part 24 head: 1.47 W/kg; body-worn: 0.634 W/kg; Part 15C head:0.1 W/kg; body-worn: 0.025 W/kg. HAC Rating: M4/T4-2007. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/13/2009 Application Dated: 12/13/2009 |
| Palm Inc |
| 950 West Maude Ave |
| Sunnyvale, CA 94085 |
| Attention: Helen Zhao , Sr. Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O8F-PIXEW |
| Name of Grantee: | Palm Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | CDMA/1x EVDO Rel 0 / EVDO Rev. A with WiFi and Bluetooth Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.08913 | |||
| 15C | 2402.0 - 2480.0 | 0.00171 |
| Output power listed is conducted. This device is co-located in a Part 22/24 handset. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is limited to the specific configurations tested in filings under this FCC ID. Body-worn operations are restricted to manufacturer accessories supplied or designated for the device or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and a user's body. End users must be informed of the body-worn requirements for satisfying RF exposure compliance. The highest reported SAR values for this FCC ID are: Part 22 head: 1.23 W/kg; body-worn: 0.73 W/kg; Part 24 head: 1.47 W/kg; body-worn: 0.634 W/kg; Part 15C head: 0.1 W/kg; body-worn: 0.025 W/kg. |
EAS Grant - Application eiqRLIvoGJZEjyFw4P69Bw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Palm Inc 950 West Maude Ave Sunnyvale, CA 94085 United States |
Date of Grant: 12/13/2009 Application Dated: 12/13/2009 |
| Attention: Helen Zhao , Sr. Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O8F-PIXEW |
| Name of Grantee: | Palm Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | CDMA/1x EVDO Rel 0 / EVDO Rev. A with WiFi and Bluetooth Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.08913 | |||
| 15C | 2402.0 - 2480.0 | 0.00171 |
| Output power listed is conducted. This device is co-located in a Part 22/24 handset. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is limited to the specific configurations tested in filings under this FCC ID. Body-worn operations are restricted to manufacturer accessories supplied or designated for the device or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and a user's body. End users must be informed of the body-worn requirements for satisfying RF exposure compliance. The highest reported SAR values for this FCC ID are: Part 22 head: 1.23 W/kg; body-worn: 0.73 W/kg; Part 24 head: 1.47 W/kg; body-worn: 0.634 W/kg; Part 15C head: 0.1 W/kg; body-worn: 0.025 W/kg. |
| Mail To: |