FCC ID O8FJIMI

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 10/18/2005 Application Dated: 10/18/2005

Palm Inc

950 West Maude Ave

Sunnyvale, CA 94085

Attention: Helen Zhao , Sr. Regulatory Compliance Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	O8FJIMI
Name of Grantee:	Palm Inc
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Cellphone with Bluetooth

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0  -  2480.0	0.0014

Power listed is conducted. The antenna used for this transmitter is co-located with a Part 22/24 transceiver. End-users must be provided with antenna installation instructions and transmitter opertating conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Palm Inc 950 West Maude Ave Sunnyvale, CA 94085 United States

Date of Grant: 10/18/2005 Application Dated: 10/18/2005

Attention: Helen Zhao , Sr. Regulatory Compliance Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	O8FJIMI
Name of Grantee:	Palm Inc
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Cellphone with Bluetooth
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0  -  2480.0	0.0014

Power listed is conducted. The antenna used for this transmitter is co-located with a Part 22/24 transceiver. End-users must be provided with antenna installation instructions and transmitter opertating conditions for satisfying RF exposure compliance.

TCB Grant - Application FJKeDTwx3upstUB50LwJCA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 10/18/2005 Application Dated: 10/18/2005

Palm Inc

950 West Maude Ave

Sunnyvale, CA 94085

Attention: Helen Zhao , Sr. Regulatory Compliance Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	O8FJIMI
Name of Grantee:	Palm Inc
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	Cellphone with Bluetooth

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC HC	22H	824.7  -  848.31	0.169	38.0  Hz	1M25F9W
BC HC	24E	1851.25  -  1908.75	0.374	45.0  Hz	1M25F9W

Power Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Bodyworn operations are restricted to manufacturer accessories supplied or designated for the device or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user’s body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Part 22 CDMA Head 1.26 W/kg; Body-worn 1.01 W/kg; Part 24 CDMA Head 1.26 W/kg; Body-worn 0.55 W/kg.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
HC:	This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Palm Inc 950 West Maude Ave Sunnyvale, CA 94085 United States

Date of Grant: 10/18/2005 Application Dated: 10/18/2005

Attention: Helen Zhao , Sr. Regulatory Compliance Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	O8FJIMI
Name of Grantee:	Palm Inc
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	Cellphone with Bluetooth
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC HC	22H	824.7  -  848.31	0.169	38.0  Hz	1M25F9W
BC HC	24E	1851.25  -  1908.75	0.374	45.0  Hz	1M25F9W

Power Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Bodyworn operations are restricted to manufacturer accessories supplied or designated for the device or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user’s body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Part 22 CDMA Head 1.26 W/kg; Body-worn 1.01 W/kg; Part 24 CDMA Head 1.26 W/kg; Body-worn 0.55 W/kg.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
HC:	This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules.

TCB Grant - Application /IN45RrVbliLu1krOlbGVQ==

EAS Grant - Application /IN45RrVbliLu1krOlbGVQ==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Palm Inc 950 West Maude Ave Sunnyvale, CA 94085 United States

Date of Grant: 12/23/2005 Application Dated: 10/24/2005

Attention: Helen Zhao , Sr. Regulatory Compliance Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	O8FJIMI
Name of Grantee:	Palm Inc
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	CELL/PCS CDMA Smartphone
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC HC	24E	1851.25  -  1908.75	0.374	45.0  Hz	1M25F9W
BC HC	22H	824.7  -  848.31	0.169	38.0  Hz	1M25F9W

Output power is ERP for Part 22 and EIRP for Part 24. SAR compliance for collocated operating configurations with FCC ID QPUWLAN6060SD has been evaluated as descibed in this filing; other collocated configurations require separate evaluation. SAR compliance for body-worn operating conditions is limited to the specific configurations tested in filings under this FCC ID. Body-worn operations are restricted to manufacturer accessories supplied or designated for the device or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and a user's body. End users must be informed of the body-worn requirements for satisfying RF exposure compliance. The highest reported SAR values for single- and co-transmit configurations in filings associated with this FCC ID are: Part 22 head 1.26 W/kg; body-worn 1.01 W/kg; Part 24 head 1.26 W/kg; body-worn 0.55 W/kg; co-transmitting - Part 22 head 1.46 W/kg, body-worn 0.61 W/kg; Part 24 head 1.06 W/kg, body-worn 0.53 W/kg.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
HC:	This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules.

Mail To: