FCC ID O9C-WL548

3Com AirProtect Sentry 5850

by Hewlett Packard Enterprise

Grantee Code: O9C   Product Code: WL548
Latest application date: 2007-03-02

FCC ID Device Details

FCC IDO9C-WL548
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeO9C
Product CodeWL548
Applicant BusinessHewlett Packard Enterprise 🇺🇸
Related Domains hp.com
Equipment Class3Com AirProtect Sentry 5850
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2007-03-02
2412-2462 MHzOriginal Equipment2007-03-02

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2007-03-02PDF 556.6 KB
Internal PhotosInternal Photos2007-03-02PDF 1.4 MB
External PhotosExternal Photos2007-03-02PDF 1.6 MB
Label InfoID Label/Location Info2007-03-02PDF 156.9 KB
Test Setup PhotosTest Setup Photos2007-03-02PDF 1.1 MB
Test Setup PhotosTest Setup Photos2007-03-02PDF 1.3 MB
Test Report 1Test Report2007-03-02PDF 2.9 MB
Test Report 1Test Report2007-03-02PDF 3 MB
Test Report 2Test Report2007-03-02PDF 3 MB
Test Report 2Test Report2007-03-02PDF 2.9 MB
Test Report 3Test Report2007-03-02PDF 403 KB
Test Report 3Test Report2007-03-02PDF 3 MB
Test Report 4Test Report2007-03-02PDF 3 MB
Test Report 5Test Report2007-03-02PDF 2.9 MB
Test Report 6Test Report2007-03-02PDF 182.1 KB
Confidentiality Request LetterCover Letter(s)2007-03-02PDF 43.9 KB
Supersede Request LetterCover Letter(s)2007-03-02PDF 17.6 KB
MPERF Exposure Info2007-03-02PDF 66.1 KB
MPERF Exposure Info2007-03-02PDF 77.1 KB

Application Information

Application IDaYgDdZCmepBJl3jxDTRaqw==
Final Action Date2007-03-02
Application PurposeOriginal Equipment
Applicant FRN0001533298
Model-WL548
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description3Com AirProtect Sentry 5850
Responsible PartyJim Taylor, Manager, Hardware Support Engineering, james.j.taylor@hp.com , +1 508 459 7977
Technical ContactWayne Hsu, Sporton International Inc., wayne@sporton.com.tw
Test FirmW Huang, Sporton International Inc., kathy@sporton.com.tw , 886-2-2696-2468
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This device must be professionally installed. The intended use is generally not for the general public. It is generally for industry/commercial use. Turbo mode function is available in this device, but it will be turned off before the product is shipping to US market.

Applications

Application IDDatePurpose
aYgDdZCmepBJl3jxDTRaqw==2007-03-02Original Equipment
0o8hn54fEZwxGA5hweRvSg==2007-03-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.22415CCC
5180-5240 MHz0.048500015ECC
5745-5825 MHz0.29515CCC

Grants

TCB Grant - Application aYgDdZCmepBJl3jxDTRaqw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 03/02/2007

Application Dated: 03/02/2007
Hewlett-Packard Company
153 Taylor Street
Littleton, MA 01460-1407
 
Attention: Jim Taylor , Manager, Hardware Support Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O9C-WL548
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 3Com AirProtect Sentry 5850
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0485  

Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This device must be professionally installed. The intended use is generally not for the general public. It is generally for industry/commercial use. Turbo mode function is available in this device, but it will be turned off before the product is shipping to US market.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application aYgDdZCmepBJl3jxDTRaqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
153 Taylor Street
Littleton, MA 01460-1407
United States
  Date of Grant: 03/02/2007

Application Dated: 03/02/2007
 
Attention: Jim Taylor , Manager, Hardware Support Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O9C-WL548
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 3Com AirProtect Sentry 5850
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0485  

Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This device must be professionally installed. The intended use is generally not for the general public. It is generally for industry/commercial use. Turbo mode function is available in this device, but it will be turned off before the product is shipping to US market.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA846638

TCB Grant - Application 0o8hn54fEZwxGA5hweRvSg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 03/02/2007

Application Dated: 03/02/2007
Hewlett-Packard Company
153 Taylor Street
Littleton, MA 01460-1407
 
Attention: Jim Taylor , Manager, Hardware Support Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O9C-WL548
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: 3Com AirProtect Sentry 5850
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.224  
CC 15C 5745.0  -  5825.0 0.295  

Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This device must be professionally installed. The intended use is generally not for the general public. It is generally for industry/commercial use. Turbo mode function is available in this device, but it will be turned off before the product is shipping to US market.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 0o8hn54fEZwxGA5hweRvSg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
153 Taylor Street
Littleton, MA 01460-1407
United States
  Date of Grant: 03/02/2007

Application Dated: 03/02/2007
 
Attention: Jim Taylor , Manager, Hardware Support Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  O9C-WL548
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: 3Com AirProtect Sentry 5850
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.224  
CC 15C 5745.0  -  5825.0 0.295  

Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This device must be professionally installed. The intended use is generally not for the general public. It is generally for industry/commercial use. Turbo mode function is available in this device, but it will be turned off before the product is shipping to US market.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA658046