FCC ID O9C-WL560
11a/b/g Wireless Workgroup Bridge
by Hewlett Packard Enterprise
Grantee Code: O9C Product Code: WL560
Latest application date: 2004-12-03
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-12-03 |
| 5150-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2004-12-03 |
| 2412-2462 MHz | Original Equipment | 2004-08-19 |
| 5150-5250 MHz | Original Equipment | 2004-08-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Preliminary Manuals | Users Manual | 2004-08-19 | PDF 1.8 MB |
| Internal photos | Internal Photos | 2004-12-03 | PDF 1.2 MB |
| Internal | Internal Photos | 2004-08-19 | PDF 335.8 KB |
| External photos | External Photos | 2004-12-03 | PDF 440.3 KB |
| External | External Photos | 2004-08-19 | PDF 335.8 KB |
| Location | ID Label/Location Info | 2004-08-19 | PDF 51.7 KB |
| Sample | ID Label/Location Info | 2004-08-19 | PDF 487.6 KB |
| Test setup | Test Setup Photos | 2004-12-03 | PDF 1.2 MB |
| setup photos | Test Setup Photos | 2004-12-03 | PDF 1.2 MB |
| Revised Test Setup | Test Setup Photos | 2004-08-19 | PDF 2.9 MB |
| Test Setup Photos | Test Setup Photos | 2004-08-19 | PDF 2.9 MB |
| Test report | Test Report | 2004-12-03 | PDF 3 MB |
| Test report | Test Report | 2004-12-03 | PDF 1.2 MB |
| 802 11 bg Test Report | Test Report | 2004-08-19 | PDF 2.7 MB |
| 802 11a Test Report Metadata only | Test Report | 2004-08-19 | PDF 3.3 MB |
| Revised Part 1 | Test Report | 2004-08-19 | PDF 2.4 MB |
| Revised Part 2 | Test Report | 2004-08-19 | PDF 3.3 MB |
| Reason for PC2 | Cover Letter(s) | 2004-12-03 | PDF 333.8 KB |
| ATCB Comments 08182004 | Cover Letter(s) | 2004-08-19 | PDF 45.2 KB |
| Confid Request | Cover Letter(s) | 2004-08-19 | PDF 385 KB |
| RF Exposure b g | Cover Letter(s) | 2004-08-19 | PDF 200.8 KB |
| Reply to ATCB | Cover Letter(s) | 2004-08-19 | PDF 6.2 KB |
| Response to ATCB | Cover Letter(s) | 2004-08-19 | PDF 6.2 KB |
| Revised Modular Request | Cover Letter(s) | 2004-08-19 | PDF 151.4 KB |
| RF Exposure 802 11a | RF Exposure Info | 2004-08-19 | PDF 170.8 KB |
| Block Metadata only | Block Diagram | PDF 68.9 KB | |
| Schema Metadata only | Schematics | PDF 272.9 KB | |
| Op Description Metadata only | Operational Description | PDF 11 KB |
Application Information
| Application ID | 9gyBp7w9sfCLTLn0SvQBZA== |
|---|---|
| Final Action Date | 2004-12-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0001533298 |
| Model | WL560 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 11a/b/g Wireless Workgroup Bridge |
| Responsible Party | Jim Taylor, Manager, Hardware Support Engineering, james.j.taylor@hpe.com  , +1 508 467-0059 |
| Agent | Alan Alan Alan, Sproton International Inc., alan@sporton.com.tw  , 883-3-327-3456 |
| Technical Contact | Alan Lane, Sproton International Inc., alan@sporton.com.tw , 883-3-327-3456 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com  , 886-3-3183232 |
| TCB Email | hotline@americantcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval (LMA) restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9gyBp7w9sfCLTLn0SvQBZA== | 2004-12-03 | Class II permissive change or modification of presently authorized equipment |
| 52cGJkEbBaDeVPlmg7yeIA== | 2004-12-03 | Class II permissive change or modification of presently authorized equipment |
| VM2lpdJfBLmYgivmqv69Ug== | 2004-08-19 | Original Equipment |
| QnExNuNq+W2TKiz2W8Pgvw== | 2004-08-19 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application VM2lpdJfBLmYgivmqv69Ug==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/19/2004 Application Dated: 08/19/2004 |
| Hewlett Packard Enterprise |
| 153 Taylor Street |
| Littleton, MA 01460-1407 |
| Attention: Jim Taylor , Manager, Hardware Support Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9C-WL560 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | 11a/b/g Wireless Workgroup Bridge |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.17 |
| Limited Modular Approval (LMA) restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application VM2lpdJfBLmYgivmqv69Ug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 153 Taylor Street Littleton, MA 01460-1407 United States |
Date of Grant: 08/19/2004 Application Dated: 08/19/2004 |
| Attention: Jim Taylor , Manager, Hardware Support Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9C-WL560 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | 11a/b/g Wireless Workgroup Bridge |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.17 |
| Limited Modular Approval (LMA) restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/19/2004 Application Dated: 08/19/2004 |
| Hewlett Packard Enterprise |
| 153 Taylor Street |
| Littleton, MA 01460-1407 |
| Attention: Jim Taylor , Manager, Hardware Support Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9C-WL560 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 11a/b/g Wireless Workgroup Bridge |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.048 | ||
| CC | 15E | 5250.0 - 5350.0 | 0.157 | ||
| CC | 15E | 5725.0 - 5825.0 | 0.232 |
| Limited Modular Approval (LMA) restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM Integrators must satisfy the integral antenna requirements of 15.407(d) and advise the end user of the indoor restrictions of 15.407(e). The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QnExNuNq+W2TKiz2W8Pgvw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 153 Taylor Street Littleton, MA 01460-1407 United States |
Date of Grant: 08/19/2004 Application Dated: 08/19/2004 |
| Attention: Jim Taylor , Manager, Hardware Support Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9C-WL560 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 11a/b/g Wireless Workgroup Bridge |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.048 | ||
| CC | 15E | 5250.0 - 5350.0 | 0.157 | ||
| CC | 15E | 5725.0 - 5825.0 | 0.232 |
| Limited Modular Approval (LMA) restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM Integrators must satisfy the integral antenna requirements of 15.407(d) and advise the end user of the indoor restrictions of 15.407(e). The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/03/2004 Application Dated: 12/03/2004 |
| Hewlett Packard Enterprise |
| 153 Taylor Street |
| Littleton, MA 01460-1407 |
| Attention: Jim Taylor , Manager, Hardware Support Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9C-WL560 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | 11a/b/g Wireless Workgroup Bridge |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.17 |
| Limited Modular Approval (LMA) restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9gyBp7w9sfCLTLn0SvQBZA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 153 Taylor Street Littleton, MA 01460-1407 United States |
Date of Grant: 12/03/2004 Application Dated: 12/03/2004 |
| Attention: Jim Taylor , Manager, Hardware Support Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9C-WL560 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | 11a/b/g Wireless Workgroup Bridge |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.17 |
| Limited Modular Approval (LMA) restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/03/2004 Application Dated: 12/03/2004 |
| Hewlett Packard Enterprise |
| 153 Taylor Street |
| Littleton, MA 01460-1407 |
| Attention: Jim Taylor , Manager, Hardware Support Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9C-WL560 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 11a/b/g Wireless Workgroup Bridge |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.048 | ||
| CC | 15E | 5250.0 - 5350.0 | 0.157 | ||
| CC | 15E | 5725.0 - 5825.0 | 0.232 |
| Limited Modular Approval (LMA) restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM Integrators must advise the end user of the indoor restrictions of 15.407(e). The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 52cGJkEbBaDeVPlmg7yeIA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 153 Taylor Street Littleton, MA 01460-1407 United States |
Date of Grant: 12/03/2004 Application Dated: 12/03/2004 |
| Attention: Jim Taylor , Manager, Hardware Support Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9C-WL560 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 11a/b/g Wireless Workgroup Bridge |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5150.0 - 5250.0 | 0.048 | ||
| CC | 15E | 5250.0 - 5350.0 | 0.157 | ||
| CC | 15E | 5725.0 - 5825.0 | 0.232 |
| Limited Modular Approval (LMA) restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. OEM Integrators must advise the end user of the indoor restrictions of 15.407(e). The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |