FCC ID O9PE2900AA1
915U-2 Wireless Mesh Networking I/O and Gateway
by ELPRO Technologies Pty Ltd
Grantee Code: O9P Product Code: E2900AA1
Latest application date: 2016-07-21
FCC ID Device Details
| FCC ID | O9PE2900AA1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | O9P |
| Product Code | E2900AA1 |
| Applicant Business | ELPRO Technologies Pty Ltd 🇦🇺 |
| Related Domains |  elpro.com.au |
| Equipment Class | 915U-2 Wireless Mesh Networking I/O and Gateway |
| Test Firm | EMC Bayswater Pty Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.625-927.375 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-21 |
| 902.625-927.375 MHz | Original Equipment | 2009-09-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2009-09-28 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2009-09-28 | PDF 337.5 KB |
| External Photos | External Photos | 2009-09-28 | PDF 91.9 KB |
| Label | ID Label/Location Info | 2009-09-28 | PDF 134.2 KB |
| Antenna Specs | Operational Description | 2009-09-28 | PDF 57.1 KB |
| Yagi Antenna Specs | Operational Description | 2009-09-28 | PDF 31.7 KB |
| Test Setup Photos | Test Setup Photos | 2016-07-21 | PDF 68.9 KB |
| Test Setup Photos | Test Setup Photos | 2009-09-28 | PDF 419 KB |
| 915U-2 FCC Part 15 Section 15.247 Test Report | Test Report | 2016-07-21 | PDF 951 KB |
| Test Report | Test Report | 2009-09-28 | PDF 1.2 MB |
| Agent Authority Cover Letter | Cover Letter(s) | 2016-07-21 | PDF 60.5 KB |
| FCC Class II Permissive Change Explanation Cover Letter | Cover Letter(s) | 2016-07-21 | PDF 232.9 KB |
| FCC Cover Letter | Cover Letter(s) | 2016-07-21 | PDF 25 KB |
| Antenna Cable Specifications | Cover Letter(s) | 2009-09-28 | PDF 35.9 KB |
| Authorization Letter | Cover Letter(s) | 2009-09-28 | PDF 8.8 KB |
| Confidential Request | Cover Letter(s) | 2009-09-28 | PDF 10.1 KB |
| DOC Letter | Cover Letter(s) | 2009-09-28 | PDF 7.6 KB |
| rad assessment | Cover Letter(s) | 2009-09-28 | PDF 13.7 KB |
Application Information
| Application ID | kdKpKUwo2DSLGev2yhemEA== |
|---|---|
| Final Action Date | 2016-07-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013674825 |
| Model | E2900AA1 |
| Frequency Range | 902.625-927.375 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 915U-2 Wireless Mesh Networking I/O and Gateway |
| Responsible Party | John White, General Manager, johnw@elpro.com.au , 0061-7-3352-8600 |
| Test Firm | Clint Finch, EMC Bayswater Pty Ltd, clint@emcbayswater.com.au  , 61397615888 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. This device must be professionally installed. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| kdKpKUwo2DSLGev2yhemEA== | 2016-07-21 | Class II permissive change or modification of presently authorized equipment |
| TUAinuEP9wNAM2npduEkUw== | 2009-09-28 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.625-927.375 MHz | 1.0000000 | 15C |
Grants
TCB Grant - Application TUAinuEP9wNAM2npduEkUw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/28/2009 Application Dated: 09/24/2009 |
| ELPRO Technologies Pty Ltd |
| 9/12 Billabong Street |
| StaffordP.O. Box 1544, |
| Queensland, 4053 Australia |
| Attention: Harry Courtice , Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9PE2900AA1 |
| Name of Grantee: | ELPRO Technologies Pty Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz FREQUENCY HOPPING SPREAD SPECTRUM TRANSCEIVER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.625 - 927.375 | 1.0 |
| Power listed is conducted. This device must be professionally installed. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
EAS Grant - Application TUAinuEP9wNAM2npduEkUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ELPRO Technologies Pty Ltd 9/12 Billabong Street StaffordP.O. Box 1544, Queensland, 4053 Australia |
Date of Grant: 09/28/2009 Application Dated: 09/24/2009 |
| Attention: Harry Courtice , Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9PE2900AA1 |
| Name of Grantee: | ELPRO Technologies Pty Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz FREQUENCY HOPPING SPREAD SPECTRUM TRANSCEIVER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.625 - 927.375 | 1.0 |
| Power listed is conducted. This device must be professionally installed. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/21/2016 Application Dated: 07/21/2016 |
| ELPRO Technologies Pty Ltd |
| 29 Lathe Street |
| Virginia |
| Queensland, 4014 Australia |
| Attention: John White , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9PE2900AA1 |
| Name of Grantee: | ELPRO Technologies Pty Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 915U-2 Wireless Mesh Networking I/O and Gateway |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.625 - 927.375 | 1.0 |
| Power listed is conducted. This device must be professionally installed. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application kdKpKUwo2DSLGev2yhemEA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ELPRO Technologies Pty Ltd 29 Lathe Street Virginia Queensland, 4014 Australia |
Date of Grant: 07/21/2016 Application Dated: 07/21/2016 |
| Attention: John White , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | O9PE2900AA1 |
| Name of Grantee: | ELPRO Technologies Pty Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 915U-2 Wireless Mesh Networking I/O and Gateway |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.625 - 927.375 | 1.0 |
| Power listed is conducted. This device must be professionally installed. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |