FCC ID OGSADB512
ADB-512 UHF RFID Reader Module, ADB-522 Reader Module
by Applied Wireless Identifications Group Inc.
Grantee Code: OGS Product Code: ADB512
Latest application date: 2023-12-22
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.6-927.4 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-22 |
| 902.6-927.4 MHz | Original Equipment | 2021-07-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual rev | Users Manual | 2023-12-22 | PDF 711.3 KB |
| Users manual rev | Users Manual | 2021-07-20 | PDF 260.4 KB |
| Internal Photos | Internal Photos | 2023-12-22 | PDF 2.2 MB |
| Internal photos | Internal Photos | 2021-07-20 | PDF 479.5 KB |
| External Photos rev | External Photos | 2023-12-22 | PDF 1 MB |
| External photos rev | External Photos | 2021-07-20 | PDF 927.4 KB |
| Label Sample_ADB-522 | ID Label/Location Info | 2023-12-22 | PDF 72.9 KB |
| Label sample and label location | ID Label/Location Info | 2021-07-20 | PDF 540.4 KB |
| Test Set Up Photos rev | Test Setup Photos | 2023-12-22 | PDF 3.6 MB |
| Test setup photos | Test Setup Photos | 2021-07-20 | PDF 453.9 KB |
| Antenna Datasheet ANT-2012 | Test Report | 2023-12-22 | PDF 341.5 KB |
| Antenna Datasheet ANT-915-CPS | Test Report | 2023-12-22 | PDF 309.9 KB |
| Antenna Datasheet ANT-915CC05 | Test Report | 2023-12-22 | PDF 447.2 KB |
| Antenna Datasheet ANT-915CP-R | Test Report | 2023-12-22 | PDF 1.2 MB |
| Test Report rev | Test Report | 2023-12-22 | PDF 444.5 KB |
| Test report rev | Test Report | 2021-07-20 | PDF 812.1 KB |
| Attestation (Statements of part 2.911(d)(5)) | Attestation Statements | 2023-12-22 | PDF 292 KB |
| Attestation (U.S. local Agent Letter of part 2.911(d)(7)) | Attestation Statements | 2023-12-22 | PDF 22.5 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2023-12-22 | PDF 282.9 KB |
| Cover Letter (Confidentiality Request) | Cover Letter(s) | 2023-12-22 | PDF 294.1 KB |
| Cover Letter (Description of Change) rev | Cover Letter(s) | 2023-12-22 | PDF 88.8 KB |
| Cover Letter (Modular Approval Request) | Cover Letter(s) | 2023-12-22 | PDF 77.9 KB |
| Agent authorization | Cover Letter(s) | 2021-07-20 | PDF 17.9 KB |
| Confidentiality request | Cover Letter(s) | 2021-07-20 | PDF 20.1 KB |
| Modular Approval Request_rev | Cover Letter(s) | 2021-07-20 | PDF 125.9 KB |
| RF Exposure Info (MPE) rev | RF Exposure Info | 2023-12-22 | PDF 176.7 KB |
| RF Exposure Info (MPE)_rev | RF Exposure Info | 2021-07-20 | PDF 180.5 KB |
| Block Diagram_1 rev Metadata only | Block Diagram | PDF 160.5 KB | |
| Block Diagram_2 Metadata only | Block Diagram | PDF 129.5 KB | |
| Block diagram Metadata only | Block Diagram | PDF 12.5 KB | |
| Schematics Metadata only | Schematics | PDF 2.4 MB | |
| Schematics-S1 Metadata only | Schematics | PDF 449.9 KB | |
| Schematics-S2 Metadata only | Schematics | PDF 105.9 KB | |
| Schematics-S3 Metadata only | Schematics | PDF 132.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 233.3 KB | |
| Operational Description rev2 Metadata only | Operational Description | PDF 217.4 KB | |
| Parts List rev Metadata only | Parts List/Tune Up Info | PDF 99.3 KB |
Application Information
| Application ID | 3ZamjvfiPpWqCTGUPcq1Fw== |
|---|---|
| Final Action Date | 2023-12-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0012350286 |
| Model | ADB512 |
| Frequency Range | 902.6-927.4 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | ADB-512 UHF RFID Reader Module, ADB-522 Reader Module |
| Responsible Party | Eric Huang, CTO, eric@awid.com  , 408-825-1100 |
| Agent | Tilly Tilly Tilly, Bureau Veritas CPS (H.K.) Taoyuan Branch, tilly.pan@tw.bureauveritas.com  , 886-3-318-3232 |
| Test Firm | Liu Ken, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, ken.liu@bureauveritas.com  , +886-3-2600609 |
| TCB Email | certification@nacsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC for adding one new model (ADB-522) with updated receiver circuit as described in this filing. Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 23 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 3ZamjvfiPpWqCTGUPcq1Fw== | 2023-12-22 | Class II permissive change or modification of presently authorized equipment |
| f3igVC3+qum8vlGn0YJDTQ== | 2021-07-20 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.6-927.4 MHz | 0.8730000 | 15C |
Grants
TCB Grant - Application f3igVC3+qum8vlGn0YJDTQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 07/20/2021 Application Dated: 07/20/2021 |
| Applied Wireless Identifications Group Inc. |
| 18300 Sutter Blvd |
| Morgan Hill, CA 95037 |
| Attention: Eric Huang , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OGSADB512 |
| Name of Grantee: | Applied Wireless Identifications Group Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ADB-512 UHF RFID Reader Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.873 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 23 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application f3igVC3+qum8vlGn0YJDTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Applied Wireless Identifications Group Inc. 18300 Sutter Blvd Morgan Hill, CA 95037 United States |
Date of Grant: 07/20/2021 Application Dated: 07/20/2021 |
| Attention: Eric Huang , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OGSADB512 |
| Name of Grantee: | Applied Wireless Identifications Group Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ADB-512 UHF RFID Reader Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.873 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 23 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 12/22/2023 Application Dated: 12/22/2023 |
| Applied Wireless Identifications Group Inc. |
| 18300 Sutter Blvd |
| Morgan Hill, CA 95037 |
| Attention: Eric Huang , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OGSADB512 |
| Name of Grantee: | Applied Wireless Identifications Group Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ADB-512 UHF RFID Reader Module, ADB-522 Reader Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.873 |
| C2PC for adding one new model (ADB-522) with updated receiver circuit as described in this filing. Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 23 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application 3ZamjvfiPpWqCTGUPcq1Fw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Applied Wireless Identifications Group Inc. 18300 Sutter Blvd Morgan Hill, CA 95037 United States |
Date of Grant: 12/22/2023 Application Dated: 12/22/2023 |
| Attention: Eric Huang , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OGSADB512 |
| Name of Grantee: | Applied Wireless Identifications Group Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ADB-512 UHF RFID Reader Module, ADB-522 Reader Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.873 |
| C2PC for adding one new model (ADB-522) with updated receiver circuit as described in this filing. Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 23 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: |