FCC ID OGSMPR1712
Multi-Protocol RFID (MPR) Module
by Applied Wireless Identifications Group Inc.
Grantee Code: OGS Product Code: MPR1712
Latest application date: 2008-08-12
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Original Equipment | 2008-08-12 |
| 13.56 MHz | Original Equipment | 2008-08-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2008-08-12 | PDF 1.1 MB |
| Users Manual | Users Manual | 2008-08-12 | PDF 637.9 KB |
| External Photos | Internal Photos | 2008-08-12 | PDF 551.4 KB |
| Internal Photos | External Photos | 2008-08-12 | PDF 595.3 KB |
| Internal Photos | Internal Photos | 2008-08-12 | PDF 161.1 KB |
| External Photos | External Photos | 2008-08-12 | PDF 529.2 KB |
| Label Info | ID Label/Location Info | 2008-08-12 | PDF 89.1 KB |
| PCB Layout | Schematics | 2008-08-12 | PDF 1.6 MB |
| Antenna Specifications | Operational Description | 2008-08-12 | PDF 291.8 KB |
| Antenna Specifications | Operational Description | 2008-08-12 | PDF 123.3 KB |
| Specification Description | Operational Description | 2008-08-12 | PDF 378.1 KB |
| Specification Description | Operational Description | 2008-08-12 | PDF 374.7 KB |
| Test Setup Photos | Test Setup Photos | 2008-08-12 | PDF 607.9 KB |
| Test Setup Photos | Test Setup Photos | 2008-08-12 | PDF 352.8 KB |
| Test Report | Test Report | 2008-08-12 | PDF 1 MB |
| Test Report | Test Report | 2008-08-12 | PDF 565.9 KB |
| Authorization Letter | Cover Letter(s) | 2008-08-12 | PDF 191.2 KB |
| Confidential Letter | Cover Letter(s) | 2008-08-12 | PDF 231.2 KB |
| Letter for MPR | Cover Letter(s) | 2008-08-12 | PDF 361.2 KB |
| Lma Letter | Cover Letter(s) | 2008-08-12 | PDF 361.2 KB |
| MPE Report | RF Exposure Info | 2008-08-12 | PDF 44.9 KB |
Application Information
| Application ID | YhcEvNrZDO5AyGMFzHKgiQ== |
|---|---|
| Final Action Date | 2008-08-12 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0012350286 |
| Model | MPR1712 |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Multi-Protocol RFID (MPR) Module |
| Responsible Party | Eric Huang, CTO, eric@awid.com  , 408-825-1100 |
| Test Firm | Country Huang, A Test Lab Techno Corp, Country@atl-lab.com.tw  , 03-2710188 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| YhcEvNrZDO5AyGMFzHKgiQ== | 2008-08-12 | Original Equipment |
| /59Dno5QT+w6z/Ftcay3HQ== | 2008-08-12 | Original Equipment |
Grants
TCB Grant - Application YhcEvNrZDO5AyGMFzHKgiQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 08/12/2008 Application Dated: 08/11/2008 |
| Applied Wireless Identifications Group Inc. |
| 18300 Sutter Blvd |
| Morgan Hill, CA 95037 |
| Attention: Eric Huang , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OGSMPR1712 |
| Name of Grantee: | Applied Wireless Identifications Group Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Multi-Protocol RFID (MPR) Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.308 |
| Modular Approval: Power output is conducted and measured at the antenna terminal. This is an OEM composite transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the typical antenna(s) gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the ERP of the configuration used for MPE compliance. Products operating with this module are required to provide a minimum 20 cm separation distance. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YhcEvNrZDO5AyGMFzHKgiQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Applied Wireless Identifications Group Inc. 18300 Sutter Blvd Morgan Hill, CA 95037 United States |
Date of Grant: 08/12/2008 Application Dated: 08/11/2008 |
| Attention: Eric Huang , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OGSMPR1712 |
| Name of Grantee: | Applied Wireless Identifications Group Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Multi-Protocol RFID (MPR) Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.308 |
| Modular Approval: Power output is conducted and measured at the antenna terminal. This is an OEM composite transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the typical antenna(s) gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the ERP of the configuration used for MPE compliance. Products operating with this module are required to provide a minimum 20 cm separation distance. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 08/12/2008 Application Dated: 08/11/2008 |
| Applied Wireless Identifications Group Inc. |
| 18300 Sutter Blvd |
| Morgan Hill, CA 95037 |
| Attention: Eric Huang , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OGSMPR1712 |
| Name of Grantee: | Applied Wireless Identifications Group Inc. |
| Equipment Class: | Part 15 Low Power Transceiver, Rx Verified |
| Notes: | Multi-Protocol RFID (MPR) Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| Modular Approval: Power output is conducted and measured at the antenna terminal. This is an OEM composite transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the typical antenna(s) gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the ERP of the configuration used for MPE compliance. Products operating with this module are required to provide a minimum 20 cm separation distance. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /59Dno5QT+w6z/Ftcay3HQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Applied Wireless Identifications Group Inc. 18300 Sutter Blvd Morgan Hill, CA 95037 United States |
Date of Grant: 08/12/2008 Application Dated: 08/11/2008 |
| Attention: Eric Huang , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OGSMPR1712 |
| Name of Grantee: | Applied Wireless Identifications Group Inc. |
| Equipment Class: | Part 15 Low Power Transceiver, Rx Verified |
| Notes: | Multi-Protocol RFID (MPR) Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| Modular Approval: Power output is conducted and measured at the antenna terminal. This is an OEM composite transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the typical antenna(s) gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the ERP of the configuration used for MPE compliance. Products operating with this module are required to provide a minimum 20 cm separation distance. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |