1. FCC ID
  2. OIW
  3. OIWCBDAPG21W60

FCC ID OIWCBDAPG21W60

MW-CBDA-800A-1W60-PG2

by Dekolink Wireless Ltd

Grantee Code: OIW   Product Code: CBDAPG21W60
Latest application date: 2004-01-09

FCC ID Device Details

FCC IDOIWCBDAPG21W60
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOIW
Product CodeCBDAPG21W60
Applicant BusinessDekolink Wireless Ltd 🇮🇱
Related Domains dekolink.com nemko.com
Equipment ClassMW-CBDA-800A-1W60-PG2
Test FirmNemko Canada Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
898-904 MHzOriginal Equipment2004-01-09

Exhibits

DocumentTypeAvailableFile
Revised manualUsers Manual2004-01-09PDF 341.4 KB
Users manualUsers Manual2004-01-09PDF 623.8 KB
Interior photoInternal Photos2004-01-09PDF 251.7 KB
Exterior photosExternal Photos2004-01-09PDF 96.6 KB
Label format and locationID Label/Location Info2004-01-09PDF 897.7 KB
Operation descriptionOperational Description2004-01-09PDF 623.8 KB
Test reportTest Report2004-01-09PDF 319.6 KB
Confidentiality requestAttestation Statements2004-01-09PDF 58 KB
MPE Calculation BaseRF Exposure Info2004-01-09PDF 70.7 KB
MPE Calculation MobileRF Exposure Info2004-01-09PDF 70.8 KB
MPE Downlink MobileRF Exposure Info2004-01-09PDF 63.5 KB
MPE Uplink BaseRF Exposure Info2004-01-09PDF 63.5 KB
Parts listParts List/Tune Up Info2004-01-09PDF 101.7 KB
Schematics Metadata onlySchematicsPDF 110.6 KB

Application Information

Application IDn5l1kT0a0wTElXeFv52Zkg==
Final Action Date2004-01-09
Application PurposeOriginal Equipment
Applicant FRN0009032368
ModelCBDAPG21W60
Frequency Range898-904 MHz
Equipment ClassAMP - Amplifier
Device DescriptionMW-CBDA-800A-1W60-PG2
Responsible PartyYaron Moas, yaron@dekolink.com , 972 3918-0180
Technical ContactRuby Dulmage, Nemko Canada Inc., ruby.dulmage@nemko.com , 613-737-9680
Non-Technical ContactRuby Dulmage, Nemko Canada Inc., ruby.dulmage@nemko.com , 613-737-9680
Test FirmStuart Beck, Nemko Canada Inc., stuart.beck@nemko.com , 613-737-9680
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsDevice must meet all criteria stated in 90.219 and 22.383 for related booster/in-building operations. Downlink (indoor): the antennas used for this transmitter(s) must provide a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power must satisfy the MPE Categorical Exclusion Requirements of §2.1091. The maximum allowed antenna gain for MPE compliance is 2 dBi with a minimum of 1 dB cable loss. Uplink (outdoor): the antenna used for this transmitter is to be fixed-mounted on outdoor permanent structures providing a separation distance of at least 50 cm from all persons during normal operation. The maximum allowed antenna gain for MPE compliance is 15.8 dBi with a minimum of 1 dB cable loss. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Applications

Application IDDatePurpose
n5l1kT0a0wTElXeFv52Zkg==2004-01-09Original Equipment

Equipment Authorization

FrequencyOutputEmissionRules
898-904 MHz0.5GXW9
929-942 MHz0.5GXW9

Grants

TCB Grant - Application n5l1kT0a0wTElXeFv52Zkg==

This application does not exist.

EAS Grant - Application n5l1kT0a0wTElXeFv52Zkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dekolink Wireless Ltd
16 Bazel St, Qiryat Arieh
Petah Tikva, 497510
Israel 		  Date of Grant: 01/09/2004

Application Dated: 11/12/2003
 
Attention: Yaron Moas

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OIWCBDAPG21W60
Name of Grantee:  Dekolink Wireless Ltd
Equipment Class: Amplifier
Notes: MW-CBDA-800A-1W60-PG2
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90 898.0  -  904.0 0.5   GXW
90 929.0  -  942.0 0.5   GXW

Part 90 Class A iDEN booster.

Device must meet all criteria stated in 90.219 and 22.383 for related booster/in-building operations. Downlink (indoor): the antennas used for this transmitter(s) must provide a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power must satisfy the MPE Categorical Exclusion Requirements of §2.1091. The maximum allowed antenna gain for MPE compliance is 2 dBi with a minimum of 1 dB cable loss. Uplink (outdoor): the antenna used for this transmitter is to be fixed-mounted on outdoor permanent structures providing a separation distance of at least 50 cm from all persons during normal operation. The maximum allowed antenna gain for MPE compliance is 15.8 dBi with a minimum of 1 dB cable loss. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).



Mail To: