1. FCC ID
  2. OIW
  3. OIWCCSR8001W80

FCC ID OIWCCSR8001W80

Bi-Directional Booster

by Dekolink Wireless Ltd

Grantee Code: OIW   Product Code: CCSR8001W80
Latest application date: 2005-09-30

FCC ID Device Details

FCC IDOIWCCSR8001W80
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOIW
Product CodeCCSR8001W80
Applicant BusinessDekolink Wireless Ltd 🇮🇱
Related Domains dekolink.com
Equipment ClassBi-Directional Booster
Test FirmNemko Canada Inc. (Ottawa)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824-849 MHzOriginal Equipment2005-09-30

Exhibits

DocumentTypeAvailableFile
External photosExternal Photos2005-09-30PDF 405.1 KB
Label format and locationID Label/Location Info2005-09-30PDF 42.6 KB
Frequency response plotsTest Report2005-09-30PDF 70.9 KB
Test reportTest Report2005-09-30PDF 454.3 KB
Booster complianceCover Letter(s)2005-09-30PDF 34.8 KB
Confidentiality requestCover Letter(s)2005-09-30PDF 289.8 KB
MPE DownlinkRF Exposure Info2005-09-30PDF 70.6 KB
MPE UplinkRF Exposure Info2005-09-30PDF 70.6 KB
Tune up procedureParts List/Tune Up Info2005-09-30PDF 270.4 KB
Product manual Metadata onlyUsers ManualPDF 2.4 MB
Internal photos Metadata onlyInternal PhotosPDF 965.7 KB
Block diagram Metadata onlyBlock DiagramPDF 98.5 KB
Parts values on schematics Metadata onlyParts List/Tune Up InfoPDF 676.1 KB
Schematics Metadata onlySchematicsPDF 676.1 KB
Description and specifications Metadata onlyOperational DescriptionPDF 57 KB

Application Information

Application IDNxKvHV+rFZx8hMoebxcUQw==
Final Action Date2005-09-30
Application PurposeOriginal Equipment
Applicant FRN0009032368
ModelCCSR8001W80
Frequency Range824-849 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionBi-Directional Booster
Responsible PartyYaron Moas, yaron@dekolink.com , 972 3918-0180
Technical ContactRussell Grant, Nemko Canada Inc., russell.grant@nemko.com , 613-737-9680
Test FirmCharles Neal, Nemko Canada Inc. (Ottawa), charles.neal@nemko.com , 613-737-9680
TCB Emailstuart.beck@nemko.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsDownlink (indoor) grant conditions – The antenna used for this transmitter is to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). The maximum antenna gain for indoor use is 2 dBi. Uplink/Downlink (outdoor) grant conditions – The antenna used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Output power is the composite of multi-channels. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
NxKvHV+rFZx8hMoebxcUQw==2005-09-30Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824-849 MHz0.25AmpF9W22
824-849 MHz0.25AmpDXW22
824-849 MHz0.25AmpF8W22
824-849 MHz0.25AmpF1D22
869-894 MHz0.25AmpF9W22
869-894 MHz0.25AmpDXW22
869-894 MHz0.25AmpF8W22
869-894 MHz0.25AmpF1D22

Grants

TCB Grant - Application NxKvHV+rFZx8hMoebxcUQw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 09/30/2005

Application Dated: 09/30/2005
Dekolink Wireless Ltd
16 Bazel St, Qiryat Arieh
Petah Tikva, 497510
Israel
 
Attention: Yaron Moas

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OIWCCSR8001W80
Name of Grantee:  Dekolink Wireless Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Bi-Directional Booster
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22 824.0  -  849.0 0.25  Amp F9W
22 824.0  -  849.0 0.25  Amp DXW
22 824.0  -  849.0 0.25  Amp F8W
22 824.0  -  849.0 0.25  Amp F1D
22 869.0  -  894.0 0.25  Amp F9W
22 869.0  -  894.0 0.25  Amp DXW
22 869.0  -  894.0 0.25  Amp F8W
22 869.0  -  894.0 0.25  Amp F1D

Downlink (indoor) grant conditions – The antenna used for this transmitter is to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). The maximum antenna gain for indoor use is 2 dBi.

Uplink/Downlink (outdoor) grant conditions – The antenna used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Output power is the composite of multi-channels. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application NxKvHV+rFZx8hMoebxcUQw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dekolink Wireless Ltd
16 Bazel St, Qiryat Arieh
Petah Tikva, 497510
Israel 		  Date of Grant: 09/30/2005

Application Dated: 09/30/2005
 
Attention: Yaron Moas

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OIWCCSR8001W80
Name of Grantee:  Dekolink Wireless Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Bi-Directional Booster
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22 824.0  -  849.0 0.25  Amp F9W
22 824.0  -  849.0 0.25  Amp DXW
22 824.0  -  849.0 0.25  Amp F8W
22 824.0  -  849.0 0.25  Amp F1D
22 869.0  -  894.0 0.25  Amp F9W
22 869.0  -  894.0 0.25  Amp DXW
22 869.0  -  894.0 0.25  Amp F8W
22 869.0  -  894.0 0.25  Amp F1D

Downlink (indoor) grant conditions – The antenna used for this transmitter is to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). The maximum antenna gain for indoor use is 2 dBi.

Uplink/Downlink (outdoor) grant conditions – The antenna used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Output power is the composite of multi-channels. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: