1. FCC ID
  2. OIW
  3. OIWCMRPCS1W80

FCC ID OIWCMRPCS1W80

Bi-Directional Booster

by Dekolink Wireless Ltd

Grantee Code: OIW   Product Code: CMRPCS1W80
Latest application date: 2006-06-28

FCC ID Device Details

FCC IDOIWCMRPCS1W80
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOIW
Product CodeCMRPCS1W80
Applicant BusinessDekolink Wireless Ltd 🇮🇱
Related Domains dekolink.com nemko.com
Equipment ClassBi-Directional Booster
Test FirmNemko Canada Inc. (Ottawa)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
1850-1910 MHzOriginal Equipment2006-06-28

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2006-06-28PDF 1.1 MB
LabelID Label/Location Info2006-06-28PDF 13.2 KB
Label LocationID Label/Location Info2006-06-28PDF 44.9 KB
Operational descriptionOperational Description2006-06-28PDF 28 KB
Setup PhotosTest Setup Photos2006-06-28PDF 71.8 KB
Part 24Test Report2006-06-28PDF 806.4 KB
AuthorityCover Letter(s)2006-06-28PDF 221 KB
ConfidentialityCover Letter(s)2006-06-28PDF 202 KB
MPE DownlinkRF Exposure Info2006-06-28PDF 70.6 KB
MPE UplinkRF Exposure Info2006-06-28PDF 70.6 KB
Tune UpParts List/Tune Up Info2006-06-28PDF 1.1 MB
User Manual Metadata onlyUsers ManualPDF 2.3 MB
Internal Photos Metadata onlyInternal PhotosPDF 4 MB
Block Diagram Metadata onlyBlock DiagramPDF 162.1 KB
Schematics 1 Metadata onlySchematicsPDF 215.3 KB
Schematics 2 Metadata onlySchematicsPDF 377 KB
Schematics 3 Metadata onlySchematicsPDF 128.9 KB
Schematics 4 Metadata onlySchematicsPDF 111.1 KB
Schematics 5 Metadata onlySchematicsPDF 152.5 KB
Schematics 6 Metadata onlySchematicsPDF 54.2 KB

Application Information

Application IDtDx9eLCi5tSKOIqOzHOfRw==
Final Action Date2006-06-28
Application PurposeOriginal Equipment
Applicant FRN0009032368
ModelCMRPCS1W80
Frequency Range1850-1910 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionBi-Directional Booster
Responsible PartyYaron Moas, yaron@dekolink.com , 972 3918-0180
AgentJason Jason Jason, Nemko Canada, jason.nixon@nemko.com , 613 737 9680
Technical ContactJason Nixon, Nemko Canada, jason.nixon@nemko.com , 613 737 9680
Non-Technical ContactJason Nixon, Nemko Canada, jason.nixon@nemko.com , 613 737 80
Test FirmCharles Neal, Nemko Canada Inc. (Ottawa), charles.neal@nemko.com , 613-737-9680
TCB Emailstuert.beck@nemko.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsDownlink (indoor) grant conditions – The antenna used for this transmitter is to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Uplink/Downlink (outdoor) grant conditions – The antenna used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Output power is the composite of multi-channels. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
tDx9eLCi5tSKOIqOzHOfRw==2006-06-28Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
1850-1910 MHz0.125AmpF9W24E
1850-1910 MHz0.125AmpDXW24E
1850-1910 MHz0.125AmpGXW24E
1850-1910 MHz0.125AmpG7W24E
1930-1990 MHz0.125AmpF9W24E
1930-1990 MHz0.125AmpDXW24E
1930-1990 MHz0.125AmpGXW24E
1930-1990 MHz0.125AmpG7W24E

Grants

TCB Grant - Application tDx9eLCi5tSKOIqOzHOfRw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 06/28/2006

Application Dated: 06/28/2006
Dekolink Wireless Ltd
16 Bazel St, Qiryat Arieh
Petah Tikva, 497510
Israel
 
Attention: Yaron Moas

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OIWCMRPCS1W80
Name of Grantee:  Dekolink Wireless Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Bi-Directional Booster
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1850.0  -  1910.0 0.125  Amp F9W
24E 1850.0  -  1910.0 0.125  Amp DXW
24E 1850.0  -  1910.0 0.125  Amp GXW
24E 1850.0  -  1910.0 0.125  Amp G7W
24E 1930.0  -  1990.0 0.125  Amp F9W
24E 1930.0  -  1990.0 0.125  Amp DXW
24E 1930.0  -  1990.0 0.125  Amp GXW
24E 1930.0  -  1990.0 0.125  Amp G7W

Downlink (indoor) grant conditions – The antenna used for this transmitter is to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Uplink/Downlink (outdoor) grant conditions – The antenna used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Output power is the composite of multi-channels. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application tDx9eLCi5tSKOIqOzHOfRw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Dekolink Wireless Ltd
16 Bazel St, Qiryat Arieh
Petah Tikva, 497510
Israel 		  Date of Grant: 06/28/2006

Application Dated: 06/28/2006
 
Attention: Yaron Moas

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OIWCMRPCS1W80
Name of Grantee:  Dekolink Wireless Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Bi-Directional Booster
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1850.0  -  1910.0 0.125  Amp F9W
24E 1850.0  -  1910.0 0.125  Amp DXW
24E 1850.0  -  1910.0 0.125  Amp GXW
24E 1850.0  -  1910.0 0.125  Amp G7W
24E 1930.0  -  1990.0 0.125  Amp F9W
24E 1930.0  -  1990.0 0.125  Amp DXW
24E 1930.0  -  1990.0 0.125  Amp GXW
24E 1930.0  -  1990.0 0.125  Amp G7W

Downlink (indoor) grant conditions – The antenna used for this transmitter is to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Uplink/Downlink (outdoor) grant conditions – The antenna used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Output power is the composite of multi-channels. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: