FCC ID OJB-EX-F058

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom

Date of Grant: 07/04/2001 Application Dated: 07/04/2001

Axxcelera Broadband Wireless, Inc.

1600 E. Parham Rd

Richmond, VA 23228

Attention: Thomas Siner , Principal Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	OJB-EX-F058
Name of Grantee:	Axxcelera Broadband Wireless, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	AB-Access EXTENDER

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20	15E	5745.0  -  5805.0	0.025

Grant Conditions-The antenna used for this transmitter must be fixed- mounted on outdoor permanent structures with a seperation distance of at least 1.5 meters from all persons during normal operation. This device must transmit with a source-based time-averaging duty factor not exceeding 100%. Users and installers must be provided with antenna installation instructions and transmitter operating conditions,including antenna co-location requirements of Section 1.1307(b)(3), for satisfying RF exposure compliance.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Axxcelera Broadband Wireless, Inc. 1600 E. Parham Rd Richmond, VA 23228 United States

Date of Grant: 07/04/2001 Application Dated: 07/04/2001

Attention: Thomas Siner , Principal Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	OJB-EX-F058
Name of Grantee:	Axxcelera Broadband Wireless, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	AB-Access EXTENDER
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20	15E	5745.0  -  5805.0	0.025

Grant Conditions-The antenna used for this transmitter must be fixed- mounted on outdoor permanent structures with a seperation distance of at least 1.5 meters from all persons during normal operation. This device must transmit with a source-based time-averaging duty factor not exceeding 100%. Users and installers must be provided with antenna installation instructions and transmitter operating conditions,including antenna co-location requirements of Section 1.1307(b)(3), for satisfying RF exposure compliance.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

TCB Grant - Application ixWiXjcDSU9uitrHtmn6VA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom

Date of Grant: 05/25/2001 Application Dated: 05/25/2001

Axxcelera Broadband Wireless, Inc.

1600 E. Parham Rd

Richmond, VA 23228

Attention: Thomas Siner , Principal Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	OJB-EX-F058
Name of Grantee:	Axxcelera Broadband Wireless, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	AB-Access EXTENDER

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20	15E	5745.0  -  5805.0	0.032

Grant Conditions-The antenna used for this transmitter must be fixed- mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons during normal operation. This device must transmit with a source-based time-averaging duty factor not exceeding 100%. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Section 1.1307(b)(3,for satisfying RF exposure compliance.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Axxcelera Broadband Wireless, Inc. 1600 E. Parham Rd Richmond, VA 23228 United States

Date of Grant: 05/25/2001 Application Dated: 05/25/2001

Attention: Thomas Siner , Principal Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	OJB-EX-F058
Name of Grantee:	Axxcelera Broadband Wireless, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	AB-Access EXTENDER
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20	15E	5745.0  -  5805.0	0.032

Grant Conditions-The antenna used for this transmitter must be fixed- mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons during normal operation. This device must transmit with a source-based time-averaging duty factor not exceeding 100%. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Section 1.1307(b)(3,for satisfying RF exposure compliance.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

Mail To: