FCC ID OJF1MRU21-3

ONE- MRU AWS-3

by Corning Optical Communication LLC

Grantee Code: OJF   Product Code: 1MRU213
Latest application date: 2020-12-30

Device Images

FCC ID Device Details

FCC IDOJF1MRU21-3
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOJF
Product Code1MRU213
Applicant BusinessCorning Optical Communication LLC 🇺🇸
Related Domains corning.com
Equipment ClassONE- MRU AWS-3
Test FirmITL PRODUCT TESTING LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2110-2180 MHzClass II permissive change or modification of presently authorized equipment2020-12-30
2110-2180 MHzOriginal Equipment2016-05-19

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2016-05-19PDF 2.5 MB
Internal PhotosInternal Photos2016-05-19PDF 4 MB
External PhotosExternal Photos2016-05-19PDF 1.5 MB
Label LocationID Label/Location Info2016-05-19PDF 53.7 KB
Label SampleID Label/Location Info2016-05-19PDF 1.3 MB
Test Setup PhotosTest Setup Photos2020-12-30PDF 734 KB
Test Setup PhotosTest Setup Photos2016-05-19PDF 1,004.9 KB
Test Report pgs 1-34Test Report2020-12-30PDF 5.2 MB
Test Report pgs 102-117Test Report2020-12-30PDF 5.8 MB
Test Report pgs 118-133Test Report2020-12-30PDF 5.8 MB
Test Report pgs 134-139Test Report2020-12-30PDF 5.8 MB
Test Report pgs 150-169Test Report2020-12-30PDF 5.8 MB
Test Report pgs 170-193Test Report2020-12-30PDF 5.4 MB
Test Report pgs 194-218Test Report2020-12-30PDF 5.8 MB
Test Report pgs 219-240Test Report2020-12-30PDF 5.1 MB
Test Report pgs 241-272Test Report2020-12-30PDF 5 MB
Test Report pgs 35-52Test Report2020-12-30PDF 5.7 MB
Test Report pgs 53-86Test Report2020-12-30PDF 5.4 MB
Test Report pgs 87-101Test Report2020-12-30PDF 5.4 MB
Test Report pgs 1-35Test Report2016-05-19PDF 5.4 MB
Test Report pgs 36-50Test Report2016-05-19PDF 763.1 KB
C2PC Request LetterCover Letter(s)2020-12-30PDF 26.2 KB
Form 731 Signature Authorization LetterCover Letter(s)2020-12-30PDF 26.6 KB
ITL Authorization LetterCover Letter(s)2020-12-30PDF 55 KB
731 Signature Authorization LetterCover Letter(s)2016-05-19PDF 26.7 KB
Authorization LetterCover Letter(s)2016-05-19PDF 26.7 KB
Confidentiality Request LetterCover Letter(s)2016-05-19PDF 27.2 KB
Signal Booster Warning Declaration LetterCover Letter(s)2016-05-19PDF 22.3 KB
RF ExposureRF Exposure Info2016-05-19PDF 19.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 240.2 KB
Schematics Metadata onlySchematicsPDF 357.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 222.9 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 575.4 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 195.3 KB

Application Information

Application IDt9mnEZ3UA19Gd/AvY2ek7A==
Final Action Date2020-12-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017154329
Model1MRU21-3
Frequency Range2110-2180 MHz
Equipment ClassB2I - Part 20 Industrial Booster (CMRS)
Device DescriptionONE- MRU AWS-3
Responsible PartyJyotin Basrur, Senior Director, Product Line Management, basrurj@corning.com , 817-431-7894
Test FirmIlan Cohen, ITL PRODUCT TESTING LTD, icohen@itl.co.il , 972-8-918-6107
TCB Emailtei@timcoengr.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in the downlink path; operations if any with master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This device is part of a booster system operated with FCC IDs OJF1MRU70, OJF1MRU85, OJF1MRU19, and OJF1MRU23. Antennas installed for each remote unit must provide a minimum separation distance from all persons as described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC: Enabling the use of 5G via software only, no changes in hardware. The EUT was tested to 256QAM modulation.

Applications

Application IDDatePurpose
t9mnEZ3UA19Gd/AvY2ek7A==2020-12-30Class II permissive change or modification of presently authorized equipment
CfTVZBWoFAI9XhkWDPGN+w==2016-05-19Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
2110-2180 MHz3.31AmpGXW27
2110-2180 MHz3.02AmpG7D27
2110-2180 MHz3.02AmpF9W27

Grants

TCB Grant - Application t9mnEZ3UA19Gd/AvY2ek7A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/30/2020

Application Dated: 12/30/2020
Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJF1MRU21-3
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: ONE- MRU AWS-3
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2110.0  -  2180.0 3.31  Amp GXW
27 2110.0  -  2180.0 3.02  Amp G7D
27 2110.0  -  2180.0 3.02  Amp F9W

Power listed is conducted. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in the downlink path; operations if any with master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This device is part of a booster system operated with FCC IDs OJF1MRU70, OJF1MRU85, OJF1MRU19, and OJF1MRU23. Antennas installed for each remote unit must provide a minimum separation distance from all persons as described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC: Enabling the use of 5G via software only, no changes in hardware. The EUT was tested to 256QAM modulation.

EAS Grant - Application t9mnEZ3UA19Gd/AvY2ek7A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
United States
  Date of Grant: 12/30/2020

Application Dated: 12/30/2020
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJF1MRU21-3
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: ONE- MRU AWS-3
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2110.0  -  2180.0 3.31  Amp GXW
27 2110.0  -  2180.0 3.02  Amp G7D
27 2110.0  -  2180.0 3.02  Amp F9W

Power listed is conducted. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in the downlink path; operations if any with master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This device is part of a booster system operated with FCC IDs OJF1MRU70, OJF1MRU85, OJF1MRU19, and OJF1MRU23. Antennas installed for each remote unit must provide a minimum separation distance from all persons as described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC: Enabling the use of 5G via software only, no changes in hardware. The EUT was tested to 256QAM modulation.



TCB Grant - Application CfTVZBWoFAI9XhkWDPGN+w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/19/2016

Application Dated: 05/19/2016
Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJF1MRU21-3
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: MRU-Mid Power Remote Unit with AWS-3 Support
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2110.0  -  2180.0 3.31  Amp GXW
27 2110.0  -  2180.0 3.02  Amp G7D
27 2110.0  -  2180.0 3.02  Amp F9W

Power listed is conducted. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in the downlink path; operations if any with master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This device is part of a booster system operated with FCC IDs OJF1MRU70, OJF1MRU85, OJF1MRU19, and OJF1MRU23. Antennas installed for each remote unit must provide a minimum separation distance from all persons as described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application CfTVZBWoFAI9XhkWDPGN+w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
United States
  Date of Grant: 05/19/2016

Application Dated: 05/19/2016
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJF1MRU21-3
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: MRU-Mid Power Remote Unit with AWS-3 Support
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2110.0  -  2180.0 3.31  Amp GXW
27 2110.0  -  2180.0 3.02  Amp G7D
27 2110.0  -  2180.0 3.02  Amp F9W

Power listed is conducted. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in the downlink path; operations if any with master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This device is part of a booster system operated with FCC IDs OJF1MRU70, OJF1MRU85, OJF1MRU19, and OJF1MRU23. Antennas installed for each remote unit must provide a minimum separation distance from all persons as described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: