FCC ID OJF1MRU23CR

ONE-MRU WCS 2350-2360MHz

by Corning Optical Communication LLC

Grantee Code: OJF   Product Code: 1MRU23CR
Latest application date: 2021-01-04

FCC ID Device Details

FCC IDOJF1MRU23CR
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOJF
Product Code1MRU23CR
Applicant BusinessCorning Optical Communication LLC 🇺🇸
Related Domains corning.com
Equipment ClassONE-MRU WCS 2350-2360MHz
Test FirmITL PRODUCT TESTING LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2350-2360 MHzClass II permissive change or modification of presently authorized equipment2021-01-04
2350-2360 MHzOriginal Equipment2017-02-21

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2017-02-21PDF 2.7 MB
Internal PhotoInternal Photos2017-02-21PDF 4 MB
External PhotoExternal Photos2017-02-21PDF 1.9 MB
Label LocationID Label/Location Info2017-02-21PDF 283.3 KB
Label SampleID Label/Location Info2017-02-21PDF 1.3 MB
Test Setup PhotoTest Setup Photos2017-02-21PDF 918.2 KB
Test Report pgs 1-34Test Report2021-01-04PDF 5.7 MB
Test Report pgs 35-96Test Report2021-01-04PDF 5.8 MB
Test ReportTest Report2017-02-21PDF 4.8 MB
Warning Attestation LetterCover Letter(s)2017-02-21PDF 22.6 KB
C2PC LetterCover Letter(s)2021-01-04PDF 26.1 KB
POA 731 formCover Letter(s)2021-01-04PDF 26.6 KB
POA ITLCover Letter(s)2021-01-04PDF 26.3 KB
731 Signature Authorization LetterCover Letter(s)2017-02-21PDF 26.7 KB
Authorization LetterCover Letter(s)2017-02-21PDF 27 KB
Confidentiality Request LetterCover Letter(s)2017-02-21PDF 27.3 KB
RF ExposureRF Exposure Info2017-02-21PDF 20.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 116.9 KB
Schematics Metadata onlySchematicsPDF 204 KB
Operational Description Metadata onlyOperational DescriptionPDF 241.6 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 137.8 KB
Tune Up Pro Metadata onlyParts List/Tune Up InfoPDF 195 KB

Application Information

Application IDUOly7q//9y5M3/iKqhb+Pw==
Final Action Date2021-01-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017154329
Model1MRU23CR
Frequency Range2350-2360 MHz
Equipment ClassB2I - Part 20 Industrial Booster (CMRS)
Device DescriptionONE-MRU WCS 2350-2360MHz
Responsible PartyJyotin Basrur, Senior Director, Product Line Management, basrurj@corning.com , 817-431-7894
Test FirmIlan Cohen, ITL PRODUCT TESTING LTD, icohen@itl.co.il , 972-8-918-6107
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in the downlink path; operations if any with master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This device is part of a booster system operated with FCC ID: OJF1MRU70, FCC ID: OJF1MRU70CR, FCC ID: OJF1MRU21, FCC ID: OJF1MRU21-3, FCC ID: OJF1MRU85CR, FCC ID: OJF1MRU85, FCC ID: OJF1MRU19, and FCC ID: OJF1MRU19CR. This LTE 2300MHz band was tested for LTE 64QAM, LTE 16QAM, and LTE QPSK. Antennas installed for each remote unit must provide a minimum separation distance from all persons as described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC: C2PC: Enabling the use of 5G via software only, no changes in hardware. The EUT was tested to 256QAM modulation.

Applications

Application IDDatePurpose
UOly7q//9y5M3/iKqhb+Pw==2021-01-04Class II permissive change or modification of presently authorized equipment
+fj12cM9+Dv1yPw6BpQM0A==2017-02-21Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
2350-2360 MHz2.3400000AmpG7D27

Grants

TCB Grant - Application UOly7q//9y5M3/iKqhb+Pw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/04/2021

Application Dated: 01/04/2021
Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJF1MRU23CR
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: ONE-MRU WCS 2350-2360MHz
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2350.0  -  2360.0 2.34  Amp G7D

Power listed is conducted. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in the downlink path; operations if any with master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This device is part of a booster system operated with FCC ID: OJF1MRU70, FCC ID: OJF1MRU70CR, FCC ID: OJF1MRU21, FCC ID: OJF1MRU21-3, FCC ID: OJF1MRU85CR, FCC ID: OJF1MRU85, FCC ID: OJF1MRU19, and FCC ID: OJF1MRU19CR. This LTE 2300MHz band was tested for LTE 64QAM, LTE 16QAM, and LTE QPSK. Antennas installed for each remote unit must provide a minimum separation distance from all persons as described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC: C2PC: Enabling the use of 5G via software only, no changes in hardware. The EUT was tested to 256QAM modulation.

EAS Grant - Application UOly7q//9y5M3/iKqhb+Pw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
United States
  Date of Grant: 01/04/2021

Application Dated: 01/04/2021
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJF1MRU23CR
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: ONE-MRU WCS 2350-2360MHz
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2350.0  -  2360.0 2.34  Amp G7D

Power listed is conducted. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in the downlink path; operations if any with master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This device is part of a booster system operated with FCC ID: OJF1MRU70, FCC ID: OJF1MRU70CR, FCC ID: OJF1MRU21, FCC ID: OJF1MRU21-3, FCC ID: OJF1MRU85CR, FCC ID: OJF1MRU85, FCC ID: OJF1MRU19, and FCC ID: OJF1MRU19CR. This LTE 2300MHz band was tested for LTE 64QAM, LTE 16QAM, and LTE QPSK. Antennas installed for each remote unit must provide a minimum separation distance from all persons as described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC: C2PC: Enabling the use of 5G via software only, no changes in hardware. The EUT was tested to 256QAM modulation.



TCB Grant - Application +fj12cM9+Dv1yPw6BpQM0A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 02/21/2017

Application Dated: 02/21/2017
Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJF1MRU23CR
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: ONE-MRU WCS 2350-2360MHz
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2350.0  -  2360.0 2.34  Amp G7D

Power listed is conducted. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in the downlink path; operations if any with master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This device is part of a booster system operated with FCC ID: OJF1MRU70, FCC ID: OJF1MRU70CR, FCC ID: OJF1MRU21, FCC ID: OJF1MRU21-3, FCC ID: OJF1MRU85CR, FCC ID: OJF1MRU85, FCC ID: OJF1MRU19, and FCC ID: OJF1MRU19CR. This LTE 2300MHz band was tested for LTE 64QAM, LTE 16QAM, and LTE QPSK. Antennas installed for each remote unit must provide a minimum separation distance from all persons as described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application +fj12cM9+Dv1yPw6BpQM0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
United States
  Date of Grant: 02/21/2017

Application Dated: 02/21/2017
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJF1MRU23CR
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: ONE-MRU WCS 2350-2360MHz
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2350.0  -  2360.0 2.34  Amp G7D

Power listed is conducted. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing and excluding any other devices connected to the (uplink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in the downlink path; operations if any with master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This device is part of a booster system operated with FCC ID: OJF1MRU70, FCC ID: OJF1MRU70CR, FCC ID: OJF1MRU21, FCC ID: OJF1MRU21-3, FCC ID: OJF1MRU85CR, FCC ID: OJF1MRU85, FCC ID: OJF1MRU19, and FCC ID: OJF1MRU19CR. This LTE 2300MHz band was tested for LTE 64QAM, LTE 16QAM, and LTE QPSK. Antennas installed for each remote unit must provide a minimum separation distance from all persons as described in this filing. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: