FCC ID OJFE62-HP-7F

Remote Unit H2RU-OD-2

by Corning Optical Communication LLC

Grantee Code: OJF   Product Code: E62HP7F
Latest application date: 2021-10-28

FCC ID Device Details

FCC IDOJFE62-HP-7F
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOJF
Product CodeE62HP7F
Applicant BusinessCorning Optical Communication LLC 🇺🇸
Related Domains corning.com sgs.com
Equipment ClassRemote Unit H2RU-OD-2
Test FirmCompliance Certification Services (Kunshan) Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
729-746 MHzOriginal Equipment2021-10-28
758-768 MHzOriginal Equipment2021-10-28

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-10-28PDF 2.5 MB
Internal photoInternal Photos2021-10-28PDF 2 MB
External photoExternal Photos2021-10-28PDF 581.9 KB
LabelID Label/Location Info2021-10-28PDF 147.5 KB
Test setup photosTest Setup Photos2021-10-28PDF 354.1 KB
Appendix A-RF Output Power and Amplifier GainTest Report2021-10-28PDF 816.9 KB
Appendix B-Conducted Spurious EmissionsTest Report2021-10-28PDF 5.5 MB
Appendix C-Out-of-bandout-of-block emissionsTest Report2021-10-28PDF 2.6 MB
Appendix D-Radiated Spurious EmissionsTest Report2021-10-28PDF 238.2 KB
Appendix E-Occupied bandwidth and Input-versus-output signal comparisonTest Report2021-10-28PDF 1.4 MB
Appendix F-Out of Band RejectionTest Report2021-10-28PDF 346.9 KB
Appendix G-Frequency StabilityTest Report2021-10-28PDF 276.9 KB
Appendix H - Input-versus-output Signal Comparison_revTest Report2021-10-28PDF 802.2 KB
Appendix I - InputOutput Power and Amplifier Booster GainTest Report2021-10-28PDF 470.6 KB
Appendix J - Out-of-band out-of-block (including intermodulation) Emissions andTest Report2021-10-28PDF 1.5 MB
Appendix K - Noise emission at Antenna TerminalTest Report2021-10-28PDF 473.3 KB
Input-versus-output Signal ComparisonTest Report2021-10-28PDF 802.2 KB
InputOutput Power and Amplifier Booster GainTest Report2021-10-28PDF 470.6 KB
Noise emission at Antenna TerminalTest Report2021-10-28PDF 473.3 KB
Out-of-band out-of-block (including intermodulation) Emissions and SpuriousTest Report2021-10-28PDF 1.5 MB
Test reportTest Report2021-10-28PDF 1 MB
Attestation letterAttestation Statements2021-10-28PDF 36.7 KB
Applicant_Declaration_LetterCover Letter(s)2021-10-28PDF 1.4 MB
Auth letterCover Letter(s)2021-10-28PDF 124.5 KB
Confidentiality_FCCCover Letter(s)2021-10-28PDF 128.5 KB
MPERF Exposure Info2021-10-28PDF 290.5 KB
Block diagram Metadata onlyBlock DiagramPDF 112.2 KB
Schematics Metadata onlySchematicsPDF 1.1 MB
Operational description Metadata onlyOperational DescriptionPDF 13 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 124 KB
Tune-up Metadata onlyParts List/Tune Up InfoPDF 77.6 KB

Application Information

Application IDnXaSRz4lfLzVvgNqRjtxGw==
Final Action Date2021-10-28
Application PurposeOriginal Equipment
Applicant FRN0017154329
ModelE62-HP-7F
Frequency Range729-746 MHz
Equipment ClassB2I - Part 20 Industrial Booster (CMRS)
Device DescriptionRemote Unit H2RU-OD-2
Responsible PartyJyotin Basrur, Senior Director, Product Line Management, basrurj@corning.com , 817-431-7894
AgentParlam Parlam Parlam, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666
Technical ContactParlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666
Non-Technical ContactParlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666
Test FirmJessica Chen, Compliance Certification Services (Kunshan) Inc., Jessica.chen1@sgs.com , + 86-0512-57355888
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is the maximum MIMO conducted power. The transmit antenna must be fixed-mounted on permanent structures, be installed to provide a separation distance of at least 470 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This application covers only the system configuration with non-transmitting host unit connected to a base station; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization. Device is a booster in a 2x2 Spatial Multiplexing MIMO configuration

Applications

Application IDDatePurpose
nXaSRz4lfLzVvgNqRjtxGw==2021-10-28Original Equipment
96RrNCssPBSOWnGhgbGCRA==2021-10-28Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
729-746 MHz35.73AmpG7D27MO
729-746 MHz35.73AmpW7D27MO
746-756 MHz34.43AmpG7D27MO
746-756 MHz34.43AmpW7D27MO
758-768 MHz4.97AmpG7D9MO
758-768 MHz4.97AmpW7D9MO

Grants

TCB Grant - Application nXaSRz4lfLzVvgNqRjtxGw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 10/28/2021

Application Dated: 10/28/2021
Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFE62-HP-7F
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: Remote Unit H2RU-OD-2
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 27 729.0  -  746.0 35.73  Amp G7D
MO 27 729.0  -  746.0 35.73  Amp W7D
MO 27 746.0  -  756.0 34.43  Amp G7D
MO 27 746.0  -  756.0 34.43  Amp W7D

Output power listed is the maximum MIMO conducted power. The transmit antenna must be fixed-mounted on permanent structures, be installed to provide a separation distance of at least 470 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This application covers only the system configuration with non-transmitting host unit connected to a base station; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization.

Device is a booster in a 2x2 Spatial Multiplexing MIMO configuration


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application nXaSRz4lfLzVvgNqRjtxGw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
United States
  Date of Grant: 10/28/2021

Application Dated: 10/28/2021
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFE62-HP-7F
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: Remote Unit H2RU-OD-2
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 27 729.0  -  746.0 35.73  Amp G7D
MO 27 729.0  -  746.0 35.73  Amp W7D
MO 27 746.0  -  756.0 34.43  Amp G7D
MO 27 746.0  -  756.0 34.43  Amp W7D

Output power listed is the maximum MIMO conducted power. The transmit antenna must be fixed-mounted on permanent structures, be installed to provide a separation distance of at least 470 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This application covers only the system configuration with non-transmitting host unit connected to a base station; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization.

Device is a booster in a 2x2 Spatial Multiplexing MIMO configuration


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 96RrNCssPBSOWnGhgbGCRA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 10/28/2021

Application Dated: 10/28/2021
Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFE62-HP-7F
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: Remote Unit H2RU-OD-2
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90 758.0  -  768.0 4.97  Amp G7D
MO 90 758.0  -  768.0 4.97  Amp W7D

Output power listed is the maximum MIMO conducted power. The transmit antenna must be fixed-mounted on permanent structures, be installed to provide a separation distance of at least 470 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This application covers only the system configuration with non-transmitting host unit connected to a base station; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization.

Device is a booster in a 2x2 Spatial Multiplexing MIMO configuration


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 96RrNCssPBSOWnGhgbGCRA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
United States
  Date of Grant: 10/28/2021

Application Dated: 10/28/2021
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFE62-HP-7F
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: Remote Unit H2RU-OD-2
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90 758.0  -  768.0 4.97  Amp G7D
MO 90 758.0  -  768.0 4.97  Amp W7D

Output power listed is the maximum MIMO conducted power. The transmit antenna must be fixed-mounted on permanent structures, be installed to provide a separation distance of at least 470 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This application covers only the system configuration with non-transmitting host unit connected to a base station; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization.

Device is a booster in a 2x2 Spatial Multiplexing MIMO configuration


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: