FCC ID OJFE62-M3-L
Remote Unit
by Corning Optical Communication LLC
Grantee Code: OJF Product Code: E62M3L
Latest application date: 2023-07-03
FCC ID Device Details
| FCC ID | OJFE62-M3-L |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | OJF |
| Product Code | E62M3L |
| Applicant Business | Corning Optical Communication LLC 🇺🇸 |
| Related Domains |  corning.com  sgs.com |
| Equipment Class | Remote Unit |
| Test Firm | Compliance Certification Services (Kunshan) Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 758-768 MHz | Class II permissive change or modification of presently authorized equipment | 2023-07-03 |
| 2496-2690 MHz | Class II permissive change or modification of presently authorized equipment | 2023-07-02 |
| 758-768 MHz | Original Equipment | 2022-12-30 |
| 617-652 MHz | Original Equipment | 2022-12-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-07-03 | PDF 557.7 KB |
| Internal photo | Internal Photos | 2023-07-03 | PDF 1.1 MB |
| Internal photo | Internal Photos | 2022-12-30 | PDF 1.1 MB |
| External photo | External Photos | 2023-07-03 | PDF 631.8 KB |
| External photo | External Photos | 2022-12-30 | PDF 478.3 KB |
| Label | ID Label/Location Info | 2023-07-03 | PDF 349.9 KB |
| Test Setup photo | Test Setup Photos | 2023-07-03 | PDF 309.5 KB |
| Setup photo | Test Setup Photos | 2022-12-30 | PDF 481.7 KB |
| Test setup photo | Test Setup Photos | 2022-12-30 | PDF 481.7 KB |
| Appendix C for KSCR2305000877AT-LTE-Band14+5GNR-N14 | Test Report | 2023-07-03 | PDF 5 MB |
| Test report | Test Report | 2023-07-03 | PDF 1.3 MB |
| Appendix A for KSCR2305000877AT-LTE-Band12+5GNR-N12 | Test Report | 2023-07-02 | PDF 4.9 MB |
| Appendix B for KSCR2305000877AT-LTE-Band13+5GNR-N13 | Test Report | 2023-07-02 | PDF 4.5 MB |
| Appendix D for KSCR2305000877AT-LTE-Band26a+5GNR-N26 | Test Report | 2023-07-02 | PDF 3.9 MB |
| Appendix E for KSCR2305000877AT-LTE-Band26b+5GNR-N26 | Test Report | 2023-07-02 | PDF 4.5 MB |
| Appendix F for KSCR2305000877AT-LTE-Band30+5GNR-N30 | Test Report | 2023-07-02 | PDF 4.7 MB |
| Appendix G for KSCR2305000877AT-LTE-Band41+5GNR-N41 | Test Report | 2023-07-02 | PDF 5.3 MB |
| Appendix H for KSCR2305000877AT-LTE-Band71+5GNR-N71 | Test Report | 2023-07-02 | PDF 4.5 MB |
| Appendix for KSCR2305000877AT-LTE+NR-B25 | Test Report | 2023-07-02 | PDF 602.7 KB |
| Appendix for KSCR2305000877AT-LTE+NR-B66 | Test Report | 2023-07-02 | PDF 601.9 KB |
| Test report-FCC WWAN Booster(22 27 90) | Test Report | 2023-07-02 | PDF 1.3 MB |
| Test report-FCC WWAN Booster(24 27 ) | Test Report | 2023-07-02 | PDF 772.3 KB |
| Appendix A for KSCR2211002212AT-LTE-Band12+5GNR-N12 | Test Report | 2022-12-30 | PDF 4.9 MB |
| Appendix B for KSCR2211002212AT-LTE-Band13+5GNR-N13 | Test Report | 2022-12-30 | PDF 4.5 MB |
| Appendix C for KSCR2211002212AT-LTE-Band14+5GNR-N14 | Test Report | 2022-12-30 | PDF 5 MB |
| Appendix D for KSCR2211002212AT-LTE-Band25+5GNR-N25 | Test Report | 2022-12-30 | PDF 5.4 MB |
| Appendix E for KSCR2211002212AT-LTE-Band26a+5GNR-N26 | Test Report | 2022-12-30 | PDF 3.9 MB |
| Appendix F for KSCR2211002212AT-LTE-Band26b+5GNR-N26(869-894MHz) | Test Report | 2022-12-30 | PDF 4.5 MB |
| Appendix G for KSCR2211002212AT-LTE-Band30+5GNR-N30 | Test Report | 2022-12-30 | PDF 4.7 MB |
| Appendix H for KSCR2211002212AT-LTE-Band41+5GNR-N41 | Test Report | 2022-12-30 | PDF 5.3 MB |
| Appendix I for KSCR2211002212AT-LTE-Band66+5GNR-N66 | Test Report | 2022-12-30 | PDF 4.9 MB |
| Appendix J for KSCR2211002212AT-LTE-Band71+5GNR-N71 | Test Report | 2022-12-30 | PDF 4.5 MB |
| Test report | Test Report | 2022-12-30 | PDF 1.3 MB |
| Attestation letter | Attestation Statements | 2023-07-03 | PDF 86.4 KB |
| FCC_U.S. agent Letter | Attestation Statements | 2023-07-03 | PDF 214.9 KB |
| QSF27-14-04_Rev1.0_Applicant_Declaration_Letter | Attestation Statements | 2023-07-03 | PDF 175.6 KB |
| Attestation letter | Attestation Statements | 2022-12-30 | PDF 106.1 KB |
| Auth letter | Cover Letter(s) | 2023-07-03 | PDF 87.3 KB |
| Confidentiality_FCC | Cover Letter(s) | 2023-07-03 | PDF 138.3 KB |
| FCC_Class II Permissive Change Request | Cover Letter(s) | 2023-07-03 | PDF 98.9 KB |
| Applicant_Declaration_Letter | Cover Letter(s) | 2022-12-30 | PDF 167.7 KB |
| Auth letter | Cover Letter(s) | 2022-12-30 | PDF 67.9 KB |
| Confidentiality_FCC | Cover Letter(s) | 2022-12-30 | PDF 114.7 KB |
| MPE | RF Exposure Info | 2023-07-03 | PDF 446 KB |
| MPE | RF Exposure Info | 2022-12-30 | PDF 746.3 KB |
| Block diagram Metadata only | Block Diagram | PDF 99 KB | |
| Schematics Metadata only | Schematics | PDF 1.5 MB | |
| Schematics Metadata only | Schematics | PDF 1.3 MB | |
| Operation description Metadata only | Operational Description | PDF 99.7 KB | |
| Operational description Metadata only | Operational Description | PDF 113.4 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 63.1 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 70.9 KB | |
| Tune-up Metadata only | Parts List/Tune Up Info | PDF 36.7 KB |
Application Information
| Application ID | 9DLV1H8vwzfdgM+OonxPNw== |
|---|---|
| Final Action Date | 2023-07-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017154329 |
| Model | E62-M3-L |
| Frequency Range | 758-768 MHz |
| Equipment Class | B9B - Part 90 Class B Industrial Booster (non-SMR) |
| Device Description | Remote Unit |
| Responsible Party | Jyotin Basrur, Senior Director, Product Line Management, basrurj@corning.com , 817-431-7894 |
| Agent | Parlam Parlam Parlam, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666 |
| Technical Contact | Parlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666 |
| Non-Technical Contact | Parlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666 |
| Test Firm | Jessica Chen, Compliance Certification Services (Kunshan) Inc., Jessica.chen1@sgs.com , + 86-0512-57355888 |
| TCB Email | USCTS.TCB@SGS.COM |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is maximum ERP. This device must be professionally installed. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must be installed to provide a separation distance of at least 230cm from all persons. RF Exposure is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307(b)(3). The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 12dBi. The power of the ERP exceed 5W, according to KDB 935210 D02 v04r02 specific station authorizations are required for this product. Class II Permissive Change: This product has updated the PA chip suppliers for LTE frequency bands 25 and 66, as well as 5G NR N25 and 66, on the basis of the original product, but uses the same parameters as before. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9DLV1H8vwzfdgM+OonxPNw== | 2023-07-03 | Class II permissive change or modification of presently authorized equipment |
| qS3eSztvS0T/FD3GpD23lQ== | 2023-07-02 | Class II permissive change or modification of presently authorized equipment |
| Uu/L3Fi4OAh3YIqdJkVldQ== | 2022-12-30 | Original Equipment |
| 8Ma+F3agtgmGUbp5ViH7KQ== | 2022-12-30 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 617-652 MHz | 22.7 | Amp | G7D | 27 |
| 617-652 MHz | 19.86 | Amp | W7D | 27 |
| 617-652 MHz | 21.88 | Amp | G7D | 27 |
| 617-652 MHz | 21.88 | Amp | W7D | 27 |
| 729-746 MHz | 21.13 | Amp | W7D | 27 |
| 746-756 MHz | 22.54 | Amp | G7D | 27 |
| 746-756 MHz | 21.68 | Amp | W7D | 27 |
| 746-756 MHz | 21.53 | Amp | G7D | 27 |
| 746-756 MHz | 21.53 | Amp | W7D | 27 |
| 758-768 MHz | 21.38 | Amp | G7D | 9 |
| 758-768 MHz | 21.73 | Amp | W7D | 9 |
| 758-768 MHz | 21.04 | Amp | G7D | 9 |
| 758-768 MHz | 21.04 | Amp | W7D | 9 |
| 862-869 MHz | 24.15 | Amp | W7D | 90S |
| 862-869 MHz | 20.56 | Amp | G7D | 90S |
| 869-894 MHz | 20.94 | Amp | G7D | 22H |
| 869-894 MHz | 20.51 | Amp | W7D | 22H |
| 869-894 MHz | 20.8 | Amp | G7D | 22H |
| 869-894 MHz | 20.8 | Amp | W7D | 22H |
| 1930-1995 MHz | 94.19 | Amp | G7D | 24E |
| 1930-1995 MHz | 90.16 | Amp | W7D | 24E |
| 1930-1995 MHz | 87.9 | Amp | G7D | 24E |
| 1930-1995 MHz | 87.9 | Amp | W7D | 24E |
| 2110-2200 MHz | 54.58 | Amp | G7D | 27 |
| 2110-2200 MHz | 89.54 | Amp | G7D | 27 |
| 2110-2200 MHz | 52.48 | Amp | W7D | 27 |
| 2110-2200 MHz | 86.1 | Amp | W7D | 27 |
| 2110-2200 MHz | 53.09 | Amp | G7D | 27 |
| 2110-2200 MHz | 87.1 | Amp | G7D | 27 |
| 2110-2200 MHz | 53.09 | Amp | W7D | 27 |
| 2110-2200 MHz | 87.1 | Amp | W7D | 27 |
| 2350-2360 MHz | 91.83 | Amp | G7D | 27 |
| 2350-2360 MHz | 88.51 | Amp | W7D | 27 |
| 2350-2360 MHz | 88.72 | Amp | G7D | 27 |
| 2350-2360 MHz | 88.72 | Amp | W7D | 27 |
| 2496-2690 MHz | 143.22 | Amp | G7D | 27 |
| 2496-2690 MHz | 137.72 | Amp | W7D | 27 |
| 2496-2690 MHz | 142.89 | Amp | G7D | 27 |
| 2496-2690 MHz | 142.89 | Amp | W7D | 27 |
Grants
TCB Grant - Application Uu/L3Fi4OAh3YIqdJkVldQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/30/2022 Application Dated: 12/30/2022 |
| Corning Optical Communication LLC |
| 6 Concord Road |
| Shrewsbury, MA 01545 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFE62-M3-L |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | Part 90 Class B Industrial Booster (non-SMR) |
| Notes: | Remote Unit |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 758.0 - 768.0 | 21.38 | Amp | G7D | |
| 90 | 758.0 - 768.0 | 21.73 | Amp | W7D | |
| 90 | 758.0 - 768.0 | 21.04 | Amp | G7D | |
| 90 | 758.0 - 768.0 | 21.04 | Amp | W7D |
| Power output listed is maximum ERP. This device must be professionally installed. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must be installed to provide a separation distance of at least 230cm from all persons. RF Exposure is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307(b)(3). The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 12dBi. The power of the ERP exceed 5W, according to KDB 935210 D02 v04r02 specific station authorizations are required for this product. |
EAS Grant - Application Uu/L3Fi4OAh3YIqdJkVldQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Corning Optical Communication LLC 6 Concord Road Shrewsbury, MA 01545 United States |
Date of Grant: 12/30/2022 Application Dated: 12/30/2022 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFE62-M3-L |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | Part 90 Class B Industrial Booster (non-SMR) |
| Notes: | Remote Unit |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 758.0 - 768.0 | 21.38 | Amp | G7D | |
| 90 | 758.0 - 768.0 | 21.73 | Amp | W7D | |
| 90 | 758.0 - 768.0 | 21.04 | Amp | G7D | |
| 90 | 758.0 - 768.0 | 21.04 | Amp | W7D |
| Power output listed is maximum ERP. This device must be professionally installed. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must be installed to provide a separation distance of at least 230cm from all persons. RF Exposure is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307(b)(3). The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 12dBi. The power of the ERP exceed 5W, according to KDB 935210 D02 v04r02 specific station authorizations are required for this product. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 07/02/2023 Application Dated: 06/29/2023 |
| Corning Optical Communication LLC |
| 6 Concord Road |
| Shrewsbury, MA 01545 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFE62-M3-L |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | Part 20 Industrial Booster (CMRS) |
| Notes: | Remote Unit |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 729.0 - 746.0 | 20.75 | Amp | G7D | |
| 27 | 729.0 - 746.0 | 23.5 | Amp | W7D | |
| 27 | 729.0 - 746.0 | 21.13 | Amp | G7D | |
| 27 | 729.0 - 746.0 | 21.13 | Amp | W7D | |
| 27 | 746.0 - 756.0 | 22.54 | Amp | G7D | |
| 27 | 746.0 - 756.0 | 21.68 | Amp | W7D | |
| 27 | 746.0 - 756.0 | 21.53 | Amp | G7D | |
| 27 | 746.0 - 756.0 | 21.53 | Amp | W7D | |
| 90S | 862.0 - 869.0 | 20.56 | Amp | G7D | |
| 90S | 862.0 - 869.0 | 24.15 | Amp | W7D | |
| 24E | 1930.0 - 1995.0 | 94.19 | Amp | G7D | |
| 24E | 1930.0 - 1995.0 | 90.16 | Amp | W7D | |
| 24E | 1930.0 - 1995.0 | 87.9 | Amp | G7D | |
| 24E | 1930.0 - 1995.0 | 87.9 | Amp | W7D | |
| 22H | 869.0 - 894.0 | 20.94 | Amp | G7D | |
| 22H | 869.0 - 894.0 | 20.51 | Amp | W7D | |
| 22H | 869.0 - 894.0 | 20.8 | Amp | G7D | |
| 22H | 869.0 - 894.0 | 20.8 | Amp | W7D | |
| 27 | 2350.0 - 2360.0 | 91.83 | Amp | G7D | |
| 27 | 2350.0 - 2360.0 | 88.51 | Amp | W7D | |
| 27 | 2350.0 - 2360.0 | 88.72 | Amp | G7D | |
| 27 | 2350.0 - 2360.0 | 88.72 | Amp | W7D | |
| 27 | 2496.0 - 2690.0 | 143.22 | Amp | G7D | |
| 27 | 2496.0 - 2690.0 | 137.72 | Amp | W7D | |
| 27 | 2496.0 - 2690.0 | 142.89 | Amp | G7D | |
| 27 | 2496.0 - 2690.0 | 142.89 | Amp | W7D | |
| 27 | 2110.0 - 2200.0 | 89.54 | Amp | G7D | |
| 27 | 2110.0 - 2200.0 | 86.1 | Amp | W7D | |
| 27 | 2110.0 - 2200.0 | 87.1 | Amp | G7D | |
| 27 | 2110.0 - 2200.0 | 87.1 | Amp | W7D | |
| 27 | 617.0 - 652.0 | 22.7 | Amp | G7D | |
| 27 | 617.0 - 652.0 | 19.86 | Amp | W7D | |
| 27 | 617.0 - 652.0 | 21.88 | Amp | G7D | |
| 27 | 617.0 - 652.0 | 21.88 | Amp | W7D |
| Power output listed is maximum ERP for Band frequency below 1GHz and EIRP for band frequency above 1GHz. This device must be professionally installed. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must be installed to provide a separation distance of at least 230cm from all persons. RF Exposure is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307(b)(3). The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 12dBi. The power of the ERP exceed 5W, according to KDB 935210 D02 v04r02 specific station authorizations are required for this product. Class II Permissive Change: This product has updated the PA chip suppliers for LTE frequency bands 25 and 66, as well as 5G NR N25 and 66, on the basis of the original product, but uses the same parameters as before. |
EAS Grant - Application qS3eSztvS0T/FD3GpD23lQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Corning Optical Communication LLC 6 Concord Road Shrewsbury, MA 01545 United States |
Date of Grant: 07/02/2023 Application Dated: 06/29/2023 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFE62-M3-L |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | Part 20 Industrial Booster (CMRS) |
| Notes: | Remote Unit |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 729.0 - 746.0 | 20.75 | Amp | G7D | |
| 27 | 729.0 - 746.0 | 23.5 | Amp | W7D | |
| 27 | 729.0 - 746.0 | 21.13 | Amp | G7D | |
| 27 | 729.0 - 746.0 | 21.13 | Amp | W7D | |
| 27 | 746.0 - 756.0 | 22.54 | Amp | G7D | |
| 27 | 746.0 - 756.0 | 21.68 | Amp | W7D | |
| 27 | 746.0 - 756.0 | 21.53 | Amp | G7D | |
| 27 | 746.0 - 756.0 | 21.53 | Amp | W7D | |
| 90S | 862.0 - 869.0 | 20.56 | Amp | G7D | |
| 90S | 862.0 - 869.0 | 24.15 | Amp | W7D | |
| 24E | 1930.0 - 1995.0 | 94.19 | Amp | G7D | |
| 24E | 1930.0 - 1995.0 | 90.16 | Amp | W7D | |
| 24E | 1930.0 - 1995.0 | 87.9 | Amp | G7D | |
| 24E | 1930.0 - 1995.0 | 87.9 | Amp | W7D | |
| 22H | 869.0 - 894.0 | 20.94 | Amp | G7D | |
| 22H | 869.0 - 894.0 | 20.51 | Amp | W7D | |
| 22H | 869.0 - 894.0 | 20.8 | Amp | G7D | |
| 22H | 869.0 - 894.0 | 20.8 | Amp | W7D | |
| 27 | 2350.0 - 2360.0 | 91.83 | Amp | G7D | |
| 27 | 2350.0 - 2360.0 | 88.51 | Amp | W7D | |
| 27 | 2350.0 - 2360.0 | 88.72 | Amp | G7D | |
| 27 | 2350.0 - 2360.0 | 88.72 | Amp | W7D | |
| 27 | 2496.0 - 2690.0 | 143.22 | Amp | G7D | |
| 27 | 2496.0 - 2690.0 | 137.72 | Amp | W7D | |
| 27 | 2496.0 - 2690.0 | 142.89 | Amp | G7D | |
| 27 | 2496.0 - 2690.0 | 142.89 | Amp | W7D | |
| 27 | 2110.0 - 2200.0 | 89.54 | Amp | G7D | |
| 27 | 2110.0 - 2200.0 | 86.1 | Amp | W7D | |
| 27 | 2110.0 - 2200.0 | 87.1 | Amp | G7D | |
| 27 | 2110.0 - 2200.0 | 87.1 | Amp | W7D | |
| 27 | 617.0 - 652.0 | 22.7 | Amp | G7D | |
| 27 | 617.0 - 652.0 | 19.86 | Amp | W7D | |
| 27 | 617.0 - 652.0 | 21.88 | Amp | G7D | |
| 27 | 617.0 - 652.0 | 21.88 | Amp | W7D |
| Power output listed is maximum ERP for Band frequency below 1GHz and EIRP for band frequency above 1GHz. This device must be professionally installed. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must be installed to provide a separation distance of at least 230cm from all persons. RF Exposure is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307(b)(3). The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 12dBi. The power of the ERP exceed 5W, according to KDB 935210 D02 v04r02 specific station authorizations are required for this product. Class II Permissive Change: This product has updated the PA chip suppliers for LTE frequency bands 25 and 66, as well as 5G NR N25 and 66, on the basis of the original product, but uses the same parameters as before. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 07/03/2023 Application Dated: 07/03/2023 |
| Corning Optical Communication LLC |
| 6 Concord Road |
| Shrewsbury, MA 01545 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFE62-M3-L |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | Part 90 Class B Industrial Booster (non-SMR) |
| Notes: | Remote Unit |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 758.0 - 768.0 | 21.38 | Amp | G7D | |
| 90 | 758.0 - 768.0 | 21.73 | Amp | W7D | |
| 90 | 758.0 - 768.0 | 21.04 | Amp | G7D | |
| 90 | 758.0 - 768.0 | 21.04 | Amp | W7D |
| Power output listed is maximum ERP. This device must be professionally installed. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must be installed to provide a separation distance of at least 230cm from all persons. RF Exposure is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307(b)(3). The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 12dBi. The power of the ERP exceed 5W, according to KDB 935210 D02 v04r02 specific station authorizations are required for this product. Class II Permissive Change: This product has updated the PA chip suppliers for LTE frequency bands 25 and 66, as well as 5G NR N25 and 66, on the basis of the original product, but uses the same parameters as before. |
EAS Grant - Application 9DLV1H8vwzfdgM+OonxPNw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Corning Optical Communication LLC 6 Concord Road Shrewsbury, MA 01545 United States |
Date of Grant: 07/03/2023 Application Dated: 07/03/2023 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFE62-M3-L |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | Part 90 Class B Industrial Booster (non-SMR) |
| Notes: | Remote Unit |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 758.0 - 768.0 | 21.38 | Amp | G7D | |
| 90 | 758.0 - 768.0 | 21.73 | Amp | W7D | |
| 90 | 758.0 - 768.0 | 21.04 | Amp | G7D | |
| 90 | 758.0 - 768.0 | 21.04 | Amp | W7D |
| Power output listed is maximum ERP. This device must be professionally installed. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must be installed to provide a separation distance of at least 230cm from all persons. RF Exposure is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307(b)(3). The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 12dBi. The power of the ERP exceed 5W, according to KDB 935210 D02 v04r02 specific station authorizations are required for this product. Class II Permissive Change: This product has updated the PA chip suppliers for LTE frequency bands 25 and 66, as well as 5G NR N25 and 66, on the basis of the original product, but uses the same parameters as before. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/30/2022 Application Dated: 12/30/2022 |
| Corning Optical Communication LLC |
| 6 Concord Road |
| Shrewsbury, MA 01545 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFE62-M3-L |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | Part 20 Industrial Booster (CMRS) |
| Notes: | Remote Unit |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 729.0 - 746.0 | 20.75 | Amp | G7D | |
| 27 | 729.0 - 746.0 | 23.5 | Amp | W7D | |
| 27 | 729.0 - 746.0 | 21.13 | Amp | G7D | |
| 27 | 729.0 - 746.0 | 21.13 | Amp | W7D | |
| 27 | 746.0 - 756.0 | 22.54 | Amp | G7D | |
| 27 | 746.0 - 756.0 | 21.68 | Amp | W7D | |
| 27 | 746.0 - 756.0 | 21.53 | Amp | G7D | |
| 27 | 746.0 - 756.0 | 21.53 | Amp | W7D | |
| 90S | 862.0 - 869.0 | 20.56 | Amp | G7D | |
| 90S | 862.0 - 869.0 | 24.15 | Amp | W7D | |
| 24E | 1930.0 - 1995.0 | 94.19 | Amp | G7D | |
| 24E | 1930.0 - 1995.0 | 90.16 | Amp | W7D | |
| 24E | 1930.0 - 1995.0 | 87.9 | Amp | G7D | |
| 24E | 1930.0 - 1995.0 | 87.9 | Amp | W7D | |
| 22H | 869.0 - 894.0 | 20.94 | Amp | G7D | |
| 22H | 869.0 - 894.0 | 20.51 | Amp | W7D | |
| 22H | 869.0 - 894.0 | 20.8 | Amp | G7D | |
| 22H | 869.0 - 894.0 | 20.8 | Amp | W7D | |
| 27 | 2350.0 - 2360.0 | 91.83 | Amp | G7D | |
| 27 | 2350.0 - 2360.0 | 88.51 | Amp | W7D | |
| 27 | 2350.0 - 2360.0 | 88.72 | Amp | G7D | |
| 27 | 2350.0 - 2360.0 | 88.72 | Amp | W7D | |
| 27 | 2496.0 - 2690.0 | 143.22 | Amp | G7D | |
| 27 | 2496.0 - 2690.0 | 137.72 | Amp | W7D | |
| 27 | 2496.0 - 2690.0 | 142.89 | Amp | G7D | |
| 27 | 2496.0 - 2690.0 | 142.89 | Amp | W7D | |
| 27 | 2110.0 - 2200.0 | 54.58 | Amp | G7D | |
| 27 | 2110.0 - 2200.0 | 52.48 | Amp | W7D | |
| 27 | 2110.0 - 2200.0 | 53.09 | Amp | G7D | |
| 27 | 2110.0 - 2200.0 | 53.09 | Amp | W7D | |
| 27 | 617.0 - 652.0 | 22.7 | Amp | G7D | |
| 27 | 617.0 - 652.0 | 19.86 | Amp | W7D | |
| 27 | 617.0 - 652.0 | 21.88 | Amp | G7D | |
| 27 | 617.0 - 652.0 | 21.88 | Amp | W7D |
| Power output listed is maximum ERP for Band frequency below 1GHz and EIRP for band frequency above 1GHz. This device must be professionally installed. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must be installed to provide a separation distance of at least 230cm from all persons. RF Exposure is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307(b)(3). The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 12dBi. The power of the ERP exceed 5W, according to KDB 935210 D02 v04r02 specific station authorizations are required for this product. |
EAS Grant - Application 8Ma+F3agtgmGUbp5ViH7KQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Corning Optical Communication LLC 6 Concord Road Shrewsbury, MA 01545 United States |
Date of Grant: 12/30/2022 Application Dated: 12/30/2022 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFE62-M3-L |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | Part 20 Industrial Booster (CMRS) |
| Notes: | Remote Unit |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 729.0 - 746.0 | 20.75 | Amp | G7D | |
| 27 | 729.0 - 746.0 | 23.5 | Amp | W7D | |
| 27 | 729.0 - 746.0 | 21.13 | Amp | G7D | |
| 27 | 729.0 - 746.0 | 21.13 | Amp | W7D | |
| 27 | 746.0 - 756.0 | 22.54 | Amp | G7D | |
| 27 | 746.0 - 756.0 | 21.68 | Amp | W7D | |
| 27 | 746.0 - 756.0 | 21.53 | Amp | G7D | |
| 27 | 746.0 - 756.0 | 21.53 | Amp | W7D | |
| 90S | 862.0 - 869.0 | 20.56 | Amp | G7D | |
| 90S | 862.0 - 869.0 | 24.15 | Amp | W7D | |
| 24E | 1930.0 - 1995.0 | 94.19 | Amp | G7D | |
| 24E | 1930.0 - 1995.0 | 90.16 | Amp | W7D | |
| 24E | 1930.0 - 1995.0 | 87.9 | Amp | G7D | |
| 24E | 1930.0 - 1995.0 | 87.9 | Amp | W7D | |
| 22H | 869.0 - 894.0 | 20.94 | Amp | G7D | |
| 22H | 869.0 - 894.0 | 20.51 | Amp | W7D | |
| 22H | 869.0 - 894.0 | 20.8 | Amp | G7D | |
| 22H | 869.0 - 894.0 | 20.8 | Amp | W7D | |
| 27 | 2350.0 - 2360.0 | 91.83 | Amp | G7D | |
| 27 | 2350.0 - 2360.0 | 88.51 | Amp | W7D | |
| 27 | 2350.0 - 2360.0 | 88.72 | Amp | G7D | |
| 27 | 2350.0 - 2360.0 | 88.72 | Amp | W7D | |
| 27 | 2496.0 - 2690.0 | 143.22 | Amp | G7D | |
| 27 | 2496.0 - 2690.0 | 137.72 | Amp | W7D | |
| 27 | 2496.0 - 2690.0 | 142.89 | Amp | G7D | |
| 27 | 2496.0 - 2690.0 | 142.89 | Amp | W7D | |
| 27 | 2110.0 - 2200.0 | 54.58 | Amp | G7D | |
| 27 | 2110.0 - 2200.0 | 52.48 | Amp | W7D | |
| 27 | 2110.0 - 2200.0 | 53.09 | Amp | G7D | |
| 27 | 2110.0 - 2200.0 | 53.09 | Amp | W7D | |
| 27 | 617.0 - 652.0 | 22.7 | Amp | G7D | |
| 27 | 617.0 - 652.0 | 19.86 | Amp | W7D | |
| 27 | 617.0 - 652.0 | 21.88 | Amp | G7D | |
| 27 | 617.0 - 652.0 | 21.88 | Amp | W7D |
| Power output listed is maximum ERP for Band frequency below 1GHz and EIRP for band frequency above 1GHz. This device must be professionally installed. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter must be installed to provide a separation distance of at least 230cm from all persons. RF Exposure is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307(b)(3). The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 12dBi. The power of the ERP exceed 5W, according to KDB 935210 D02 v04r02 specific station authorizations are required for this product. |
| Mail To: |