1. FCC ID
  2. OJF
  3. OJFLITENNA0DB0P1

FCC ID OJFLITENNA0DB0P1

In Building Repeater

by Corning Optical Communication LLC

Grantee Code: OJF   Product Code: LITENNA0DB0P1
Latest application date: 2001-08-13

FCC ID Device Details

FCC IDOJFLITENNA0DB0P1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeOJF
Product CodeLITENNA0DB0P1
Applicant BusinessCorning Optical Communication LLC 🇺🇸
Related Domains corning.com
Equipment ClassIn Building Repeater
Test FirmCompliance Certification Services Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
851-869 MHzClass II permissive change or modification of presently authorized equipment2001-08-13
869-894 MHzOriginal Equipment2001-07-16

Exhibits

DocumentTypeAvailableFile
RF Exposure statement in the user manualRF Exposure Info2001-07-16PDF 58.8 KB
User ManualUsers Manual2001-07-16PDF 1.1 MB
Additional internal photos for Remote unitInternal Photos2001-07-16PDF 326.9 KB
Internal PhotosInternal Photos2001-07-16PDF 303.3 KB
Internal Photos for moduliteInternal Photos2001-07-16PDF 109.6 KB
Internal photo for RHUInternal Photos2001-07-16PDF 155.5 KB
External PhotosExternal Photos2001-07-16PDF 123.2 KB
External Photos for moduliteExternal Photos2001-07-16PDF 24.3 KB
FCC ID label format and locationID Label/Location Info2001-07-16PDF 32.1 KB
Block DiagramBlock Diagram2001-07-16PDF 21.6 KB
Block Diagram for moduliteBlock Diagram2001-07-16PDF 17.5 KB
Operational DescriptionOperational Description2001-07-16PDF 39.7 KB
Operational Description for moduliteOperational Description2001-07-16PDF 31.5 KB
Setup PhotosTest Setup Photos2001-07-16PDF 502.5 KB
Plot 1 to 24Test Report2001-07-16PDF 1.6 MB
Plot 25 to 40Test Report2001-07-16PDF 1.7 MB
Plot 41 to 56Test Report2001-07-16PDF 994.4 KB
Plot 57 to 86Test Report2001-07-16PDF 1.1 MB
Plot 87 to 96Test Report2001-07-16PDF 366.6 KB
Test ReportTest Report2001-07-16PDF 1.1 MB
plot 97 to 132Test Report2001-07-16PDF 1 MB
COVER LETTER FROM TCBCover Letter(s)2001-08-13PDF 24 KB
Request for confidentiality letterCover Letter(s)2001-07-16PDF 35.5 KB
TCB RF Exposure review statementCover Letter(s)2001-07-16PDF 25 KB
MPE calculationRF Exposure Info2001-07-16PDF 24.5 KB
Tune up procedureParts List/Tune Up Info2001-07-16PDF 16.2 KB
Schematic Diagram Metadata onlySchematicsPDF 1.1 MB
Part lists Metadata onlyParts List/Tune Up InfoPDF 263.3 KB

Application Information

Application IDGXjNHyKenES7A7D6huwGyw==
Final Action Date2001-08-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017154329
ModelLITENNA0DB0P1
Frequency Range851-869 MHz
Equipment ClassAMP - Amplifier
Device DescriptionIn Building Repeater
Responsible PartyJyotin Basrur, Senior Director, Product Line Management, basrurj@corning.com , 817-431-7894
Test FirmSteve Cheng, Compliance Certification Services Inc, scheng@ccemc.com , 408-463-0885
TCB EmailMIKEKUO@CCSEMC.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsGrant Condition : Power output is expressed as composite output of single carrier. Output is specified at the antenna terminal on the remote HUB. The antenna(s) used for this transmitter are to be fixed- mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of §1.1307(b)(3).

Applications

Application IDDatePurpose
GXjNHyKenES7A7D6huwGyw==2001-08-13Class II permissive change or modification of presently authorized equipment
+nKF4dM4w0YYzU93CuHYfg==2001-07-16Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
851-869 MHz0.302AmpGXW9
869-894 MHz0.066AmpF9W22
869-894 MHz0.269AmpDXW22
869-894 MHz0.269AmpF8W22
928-940 MHz0.288AmpF1D9
935-940 MHz0.282AmpF3E9
1930-1990 MHz0.0661AmpF9W24
1930-1990 MHz0.151AmpDXW24
1930-1990 MHz0.145AmpGXW24

Grants

TCB Grant - Application GXjNHyKenES7A7D6huwGyw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 08/13/2001

Application Dated: 08/13/2001
Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFLITENNA0DB0P1
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Amplifier
Notes: In Building Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22 869.0  -  894.0 0.066  Amp F9W
22 869.0  -  894.0 0.269  Amp DXW
22 869.0  -  894.0 0.269  Amp F8W
24 1930.0  -  1990.0 0.0661  Amp F9W
24 1930.0  -  1990.0 0.151  Amp DXW
24 1930.0  -  1990.0 0.145  Amp GXW
90 851.0  -  869.0 0.302  Amp GXW
90 935.0  -  940.0 0.282  Amp F3E
90 928.0  -  940.0 0.288  Amp F1D

Grant Condition : Power output is expressed as composite output of single carrier. Output is specified at the antenna terminal on the remote HUB. The antenna(s) used for this transmitter are to be fixed- mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of §1.1307(b)(3).

EAS Grant - Application GXjNHyKenES7A7D6huwGyw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
United States 		  Date of Grant: 08/13/2001

Application Dated: 08/13/2001
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFLITENNA0DB0P1
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Amplifier
Notes: In Building Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22 869.0  -  894.0 0.066  Amp F9W
22 869.0  -  894.0 0.269  Amp DXW
22 869.0  -  894.0 0.269  Amp F8W
24 1930.0  -  1990.0 0.0661  Amp F9W
24 1930.0  -  1990.0 0.151  Amp DXW
24 1930.0  -  1990.0 0.145  Amp GXW
90 851.0  -  869.0 0.302  Amp GXW
90 935.0  -  940.0 0.282  Amp F3E
90 928.0  -  940.0 0.288  Amp F1D

Grant Condition : Power output is expressed as composite output of single carrier. Output is specified at the antenna terminal on the remote HUB. The antenna(s) used for this transmitter are to be fixed- mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of §1.1307(b)(3).



TCB Grant - Application +nKF4dM4w0YYzU93CuHYfg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 07/16/2001

Application Dated: 07/16/2001
Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFLITENNA0DB0P1
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Amplifier
Notes: In Building Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22 869.0  -  894.0 0.066  Amp F9W
22 869.0  -  894.0 0.269  Amp DXW
22 869.0  -  894.0 0.269  Amp F8W
24 1930.0  -  1990.0 0.0661  Amp F9W
24 1930.0  -  1990.0 0.151  Amp DXW
24 1930.0  -  1990.0 0.145  Amp GXW

Grant Condition : Power output is expressed as composite output of single carrier. Output is specified at the antenna terminal on the remote HUB. The antenna(s) used for this transmitter are to be fixed- mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of §1.1307(b)(3).

EAS Grant - Application +nKF4dM4w0YYzU93CuHYfg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Corning Optical Communication LLC
6 Concord Road
Shrewsbury, MA 01545
United States 		  Date of Grant: 07/16/2001

Application Dated: 07/16/2001
 
Attention: Jyotin Basrur , Senior Director, Product Line Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  OJFLITENNA0DB0P1
Name of Grantee:  Corning Optical Communication LLC
Equipment Class: Amplifier
Notes: In Building Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22 869.0  -  894.0 0.066  Amp F9W
22 869.0  -  894.0 0.269  Amp DXW
22 869.0  -  894.0 0.269  Amp F8W
24 1930.0  -  1990.0 0.0661  Amp F9W
24 1930.0  -  1990.0 0.151  Amp DXW
24 1930.0  -  1990.0 0.145  Amp GXW

Grant Condition : Power output is expressed as composite output of single carrier. Output is specified at the antenna terminal on the remote HUB. The antenna(s) used for this transmitter are to be fixed- mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of §1.1307(b)(3).



Mail To: