FCC ID OJFMA1200
Mobile Telephone In-Building Distribution System
by Corning Optical Communication Wireless
Grantee Code: OJF Product Code: MA1200
Latest application date: 2007-02-01
FCC ID Device Details
| FCC ID | OJFMA1200 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | OJF |
| Product Code | MA1200 |
| Applicant Business | Corning Optical Communication Wireless 🇺🇸 |
| Related Domains |  corning.com |
| Equipment Class | Mobile Telephone In-Building Distribution System |
| Test Firm | Israel Testing Laboratories |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 1930-1990 MHz | Class II permissive change or modification of presently authorized equipment | 2007-02-01 |
| 1930-1990 MHz | Original Equipment | 2004-10-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| users manual | Users Manual | 2007-02-01 | PDF 534.3 KB |
| User Manual | Users Manual | 2004-10-20 | PDF 533.9 KB |
| Internal Photos | Internal Photos | 2004-10-20 | PDF 440.2 KB |
| external photos | External Photos | 2007-02-01 | PDF 192.3 KB |
| External Photos | External Photos | 2004-10-20 | PDF 191.9 KB |
| FCC ID label format and location | ID Label/Location Info | 2004-10-20 | PDF 146.4 KB |
| Test configuration diagram | Test Setup Photos | 2004-10-20 | PDF 35.3 KB |
| Test setup photos | Test Setup Photos | 2004-10-20 | PDF 35.3 KB |
| test report | Test Report | 2007-02-01 | PDF 531.1 KB |
| Band edge test | Test Report | 2004-10-20 | PDF 276.6 KB |
| EMC Test report | Test Report | 2004-10-20 | PDF 165.7 KB |
| Frequency Stabilities | Test Report | 2004-10-20 | PDF 186.7 KB |
| Test Report General Information | Test Report | 2004-10-20 | PDF 128.5 KB |
| Test report 1 of 2 | Test Report | 2004-10-20 | PDF 1.6 MB |
| Test report 2 of 2 | Test Report | 2004-10-20 | PDF 2.3 MB |
| cover letter | Cover Letter(s) | 2007-02-01 | PDF 49.9 KB |
| Authorization letter | Cover Letter(s) | 2004-10-20 | PDF 86.8 KB |
| Request for confidentiality letter | Cover Letter(s) | 2004-10-20 | PDF 75.2 KB |
| TCB Q and A | Cover Letter(s) | 2004-10-20 | PDF 8 KB |
| Parts list | Parts List/Tune Up Info | 2004-10-20 | PDF 69.3 KB |
| Tune up procedures | Parts List/Tune Up Info | 2004-10-20 | PDF 27.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 212.9 KB | |
| Optical Module schematic Metadata only | Schematics | PDF 145.5 KB | |
| Schematic Diagram Metadata only | Schematics | PDF 131.6 KB | |
| CRN 15472 Q2 theory of operation Metadata only | Operational Description | PDF 493.2 KB | |
| DC Voltage Metadata only | Operational Description | PDF 31.5 KB | |
| Technical Description Metadata only | Operational Description | PDF 737.6 KB |
Application Information
| Application ID | ZkIzvgwj5EcNNom7plZklA== |
|---|---|
| Final Action Date | 2007-02-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024751430 |
| Model | MA1200 |
| Frequency Range | 1930-1990 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Mobile Telephone In-Building Distribution System |
| Responsible Party | Habib Riazi, Dir. RF and Systems Manager, PLM, riazih@corning.com , (703) 714-7920 |
| Test Firm | Shaike Raz, Israel Testing Laboratories, sraz@itl.co.il  , 972-8-915-3100 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted at Remote Hub Unit (RHU). The maximum antenna gain is limited not to exceed 10dBi. The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of section 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna collocation requirements of Section 1.1307(b)(3). This Class II Change adds WCDMA. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ZkIzvgwj5EcNNom7plZklA== | 2007-02-01 | Class II permissive change or modification of presently authorized equipment |
| Kzz4eIt5Bo8BOCZ2xEHWUw== | 2004-10-20 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZkIzvgwj5EcNNom7plZklA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 02/01/2007 Application Dated: 02/01/2007 |
| Corning Optical Communication Wireless |
| 13221 Woodland Park Rd |
| Suite 400 |
| Herndon, VA 20171 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMA1200 |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Mobile Telephone In-Building Distribution System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1930.0 - 1990.0 | 0.196 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 0.126 | Amp | GXW | |
| 24E | 1930.0 - 1990.0 | 0.1 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 0.126 | Amp | DXW |
| Output power listed is conducted at Remote Hub Unit (RHU). The maximum antenna gain is limited not to exceed 10dBi. The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of section 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna collocation requirements of Section 1.1307(b)(3). This Class II Change adds WCDMA. |
EAS Grant - Application ZkIzvgwj5EcNNom7plZklA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Corning Optical Communication Wireless 13221 Woodland Park Rd Suite 400 Herndon, VA 20171 United States | Date of Grant: 02/01/2007 Application Dated: 02/01/2007 |
| Attention: Habib Riazi , Dir. RF and Systems Manager, PLM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMA1200 |
| Name of Grantee: | Corning Optical Communication Wireless |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Mobile Telephone In-Building Distribution System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1930.0 - 1990.0 | 0.196 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 0.126 | Amp | GXW | |
| 24E | 1930.0 - 1990.0 | 0.1 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 0.126 | Amp | DXW |
| Output power listed is conducted at Remote Hub Unit (RHU). The maximum antenna gain is limited not to exceed 10dBi. The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of section 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna collocation requirements of Section 1.1307(b)(3). This Class II Change adds WCDMA.
|
| Mail To: |
| EA133724 |
TCB Grant - Application Kzz4eIt5Bo8BOCZ2xEHWUw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/20/2004 Application Dated: 10/20/2004 |
| Corning Optical Communication LLC |
| 6 Concord Road |
| Shrewsbury, MA 01545 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMA1200 |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Mobile Telephone In-Building Distribution System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1930.0 - 1990.0 | 0.126 | Amp | GXW | |
| 24E | 1930.0 - 1990.0 | 0.1 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 0.126 | Amp | DXW |
| Output power listed is conducted at Remote Hub Unit (RHU). The maximum antenna gain is limited not to exceed 10dBi. The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of section 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna collocation requirements of Section 1.1307(b)(3). |
EAS Grant - Application Kzz4eIt5Bo8BOCZ2xEHWUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Corning Optical Communication LLC 6 Concord Road Shrewsbury, MA 01545 United States |
Date of Grant: 10/20/2004 Application Dated: 10/20/2004 |
| Attention: Jyotin Basrur , Senior Director, Product Line Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | OJFMA1200 |
| Name of Grantee: | Corning Optical Communication LLC |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Mobile Telephone In-Building Distribution System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1930.0 - 1990.0 | 0.126 | Amp | GXW | |
| 24E | 1930.0 - 1990.0 | 0.1 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 0.126 | Amp | DXW |
| Output power listed is conducted at Remote Hub Unit (RHU). The maximum antenna gain is limited not to exceed 10dBi. The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of section 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna collocation requirements of Section 1.1307(b)(3). |
| Mail To: |